Everything about Handbags - AHDORNED

Determining pocket depths and sewing line area. The narrow center area of the pocket is for a pen. The area on the right is a cell phone pocket. Due to the fact that the pockets are unfathomable for these items to be easily gotten rid of, another top-stitched seam is needed. The depth of the pockets can be quickly estimated with a pen as displayed in Photo 13.

Do not leading stitch across the left bigger pocket so it can be used for a larger product. Now onto the outside of the bag Take the pieces that will form the exterior of your bag and place them RIGHT SIDES together. Sew them together along the side joint, simply the exact same as the 2 lining pieces were stitched in Photo 6.

Stitch lining to outer fabric along red dotted lines. Iron joint open. You will have a piece that appears like Picture 14. Also Found Here lining needs to look comparable and must have a pocket! Location the lining on top of the outdoors pieces RIGHT SIDES together and pin together. Stitch together along the red rushed lines as shown in Picture 14.

15. The best side has been cut and clipped. "Cutting" is merely narrowing the 1/2 seam allowance to 1/4 by cutting away 1/4 from the raw edges. "Clipping" is a series of cuts made perpendicular to the seam as displayed in Picture 15. After clipping and cutting, turn the bag right-side out.

16. Using pin to pull seam for pushing with iron. To get joints to push nicely use a bigger pin/needle/safety pin to pull the joint as you push as revealed in Photo 16. Now it is time to stitch the other side seam 17. Pushed and all set to stitch 2nd side joint.