cdrom atapi driver

Hugh

Category: Soft

Published: waydibenswhi1984

Language: English

cdrom atapi driver

Qemu mac os x download.Builds from the official source are available here:24-04-2019 Qemu-4.0-OSX-24-04-2019.zip https://surfdrive.surf.nl/files/index.p . w/download Should run on El Capitan and higher. Now supports the command line option -device VGA,ed > Use it with this guide: http://www.emaculation.com/doku.php/ppc . mu-for-osx.14-08-2018 Qemu-3.0.0-OSX-14-08-2018.zip https://surfdrive.surf.nl/files/index.p . m/download Should run on El Capitan and higher. No sound support, as that is still experimental. Build from source for Qemu 3.0. Not much news regarding PPC emulation, but some speed up in disk performance might be noticed. Perhaps someone didn't like the sound of Qemu 2.13, so we were bumped to version 3.0.0.24-04-2018 https://surfdrive.surf.nl/files/index.p . I/download Build from Qemu 2.12 final code. Compatible with El Capitan and upwards. Please note the inclusion of the pc-bios folder, which requires the -L pc-bios parameter in the command line for Qemu to find some required files such as openbios-ppc and qemu_vga.ndrv. Our guide has been updated accordingly. Also included are two scripts that can be used to run Qemu with tap networking.05-02-2018 https://surfdrive.surf.nl/files/index.p . J/download While not providing additional functionality to the build below, it does provide a substantial performance boost. Compatible with El Capitan and upwards.16-09-2017 https://surfdrive.surf.nl/files/index.p . L/download This the first build in which the sungem network device is available from the official source of both OpenBIOS and Qemu. This allows Mac OS to see a built-in ethernet device, so the realtek drivers are no longer required. Known issues: Mac OS 9.0.4 refuses to boot when not using usb-mouse and usb-kbd. The system profiler in Mac OS 9.0.4 crashes. OSX 10.3 doesn't see the network device as built-in but functions nevertheless. Should be compatible from Mountain Lion upwards.19-05-2017 https://surfdrive.surf.nl/files/index.p . U/download Supports: -Default networking through realtek drivers, -Resolution switching: this build now officially supports on the fly resolution switching. The required qemu-vga.ndrv and corresponding openbios files are included. Please note there is now a new parameter in the command line: -prom-env "vga-ndrv?=true" By default it loads the vga driver. When set to false, it ignores the driver. -This also means OSX 10.0 and 10.1 are now supported out of the box. -Runs only in Sierra!I fixed the references from qemu-system-ppc and qemu-img to libs on which it depends (those I installed through brew to enable compilation) with the OSX install_name_tool which is part of Xcode. As one of the required libs itself also has dependencies, I fixed those too. You can find the entries to dependent libs by using the OSX otool this way: otool -L "executable name" or "Library name".For reference, the batch file I used to fix the dependencies is: #qemu-system-ppc, qemu-img and the library libgthread-2.0.0.dylib have dependencies on libraries normally not installed on a user machine. This batch file changes the dependencies of qemu-system-ppc, qemu-img, and libgthread-2.0.0.dylib to point to the libs contained in a folder Libs located besides the executables.#How to use: #Find the required libs and place them in a folder called Libs besides qemu-system-ppc and qemu-img. #Place this batch file besides qemu-system-ppc and qemu-img and run it.#fix dependencies of qemu-system-ppc install_name_tool -change /usr/local/opt/glib/lib/libgthread-2.0.0.dylib @executable_path/Libs/libgthread-2.0.0.dylib qemu-system-ppc install_name_tool -change /usr/local/opt/glib/lib/libglib-2.0.0.dylib @executable_path/Libs/libglib-2.0.0.dylib qemu-system-ppc install_name_tool -change /usr/local/opt/gettext/lib/libintl.8.dylib @executable_path/Libs/libintl.8.dylib qemu-system-ppc install_name_tool -change /usr/local/opt/pixman/lib/libpixman-1.0.dylib @executable_path/Libs/libpixman-1.0.dylib qemu-system-ppc install_name_tool -change /usr/local/opt/libpng/lib/libpng16.16.dylib @executable_path/Libs/libpng16.16.dylib qemu-system-ppc install_name_tool -change /usr/local/opt/libusb/lib/libusb-1.0.0.dylib @executable_path/Libs/libusb-1.0.0.dylib qemu-system-ppc install_name_tool -change /usr/local/opt/usbredir/lib/libusbredirparser.1.dylib @executable_path/Libs/libusbredirparser.1.dylib qemu-system-ppc.#fix dependencies of qemu-img install_name_tool -change /usr/local/opt/glib/lib/libgthread-2.0.0.dylib @executable_path/Libs/libgthread-2.0.0.dylib qemu-img install_name_tool -change /usr/local/opt/glib/lib/libglib-2.0.0.dylib @executable_path/Libs/libglib-2.0.0.dylib qemu-img install_name_tool -change /usr/local/opt/gettext/lib/libintl.8.dylib @executable_path/Libs/libintl.8.dylib qemu-img.#fix dependencies of libgthread-2.0.0.dylib sudo install_name_tool -change /usr/local/Cellar/glib/2.46.2/lib/libglib-2.0.0.dylib @executable_path/Libs/libglib-2.0.0.dylib libgthread-2.0.0.dylib sudo install_name_tool -change /usr/local/opt/gettext/lib/libintl.8.dylib @executable_path/Libs/libintl.8.dylib libgthread-2.0.0.dylib.How to compile on OSX: Install brew (/usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homeb . er/install )") brew install glib brew install pixman brew install libusb brew install pkg-config../configure --target-list="ppc-softmmu ppc64-softmmu" make.To compile with clang, additionally: brew install llvm../configure --cc=clang-7 --cxx=clang++-7 --host-cc=clang-7 \ --extra-cxxflags="-I/usr/local/opt/llvm/include" \ --extra-ldflags="-L/usr/local/opt/llvm/lib -L/usr/local/opt/libffi/lib \ -L/usr/local/opt/llvm/lib -Wl,-rpath,/usr/local/opt/llvm/lib" \ --target-list="ppc-softmmu ppc64-softmmu" make.Last edited by Cat_7 on Sat Jul 01, 2017 12:49 pm, edited 8 times in total.Top.Expert User Joined: Fri Feb 13, 2004 8:59 am Posts: 4723 Location: Sittard, The Netherlands.Experimental builds. Be warned!20-12-2019: Experimental build, compiled on Catalina. https://surfdrive.surf.nl/files/index.p . v/download To get it running on Catalina, read the included ReadMe.txt file!24-08-2019: Qemu with some very limited Ati Rage 128 Pro support https://surfdrive.surf.nl/files/index.p . p/download Be sure to read the README.23-08-2019: Qemu 4.1 with Sound support https://surfdrive.surf.nl/files/index.p . H/download Built on OSX 10.12, as 10.11 failed.08-02-2019: Qemu 4.0pre with altivec acceleration. https://surfdrive.surf.nl/files/index.p . W/download Note: this build was compiled on El-Capitan with clang7. -device VGA,ed > 08-02-2019: Qemu 4.0pre with altivec acceleration and screamer audio support. https://surfdrive.surf.nl/files/index.p . P/download Note: this build was compiled on El-Capitan with clang7. -device VGA,ed >04-01-2019: Qemu 3.1 with screen resolutions through EDID info read by the vga-driver https://surfdrive.surf.nl/files/index.p . A/download Read the readme in the vga-driver folder.30-10-2018: Sound support https://surfdrive.surf.nl/files/index.p . e/download Sound support for 9.0 to 10.5: Screamer-enabled build based on recent source. Make sure you always have the latest QuickTime and iTunes version installed in your guest OS.20-07-2018: MorphOS https://surfdrive.surf.nl/files/index.p . e/download Qemu 3.0 RC1 build for running Morphos on OSX.Last edited by Cat_7 on Thu Jul 06, 2017 5:23 am, edited 5 times in total.Top.Budgiebrain994.Student Driver Joined: Fri Jan 08, 2016 12:27 pm Posts: 10.Thank you very much cat_7, it's looking great so far.Just a couple things: in Windows instructions - startqemu.bat, one of the parameters is to load openbios-ppc-pcifix as the BIOS, but the one linked to download is just openbios-ppc. I changed the command to open the bundled openbios-ppc (new version from your second forum post), which resolved a QEMU crash and brought up OpenBIOS then the boot screen. You might want to edit the command line to prevent it happening to everyone.Secondly, by running this (on OS X 10.4) I get the boot screen, with the logo and spinning wheel, but it stops spinning after about 10mins. I tried to enable verbose mode but I'm not getting it to do so (-prom-env 'boot-args=-v' seems consistent with OS X instructions, but not Windows). How do I enable verbose mode from here? I believe that perhaps the problem could be that there IS a ppc-pcifix version which you may have needed to bundle instead of the ppc version.I'll keep waiting to see if it's just taking forever to load, and I'll keep trying to get to verbose mode running. I also may try 10.3 tomorrow. Thanks again for the astounding work.Top.Expert User Joined: Fri Feb 13, 2004 8:59 am Posts: 4723 Location: Sittard, The Netherlands.Thanks for reporting back.I updated the guide to reflect the need to rename the file or edit the windows batchfile to point to the correct file name.So it seems. Replacing all quotes with " instead of ' will allow providing arguments. Fixed in the guide.No there isn't. The latest bios file cumulatively adds all previous fixes.Overall, the windows version is much slower compared to the OSX version and has the nasty habit of losing mouse control. I'll check the 10.4 installation issue. Please note that the windows versions are created whenever there is a new official qemu release. The OSX versions are created when promising new developments are available. This leads to OSX versions probably having more/better functionality when compared to the windows versions.EDIT: quotes fixed when providing arguments in Windows version. Windows version boots 10.4 CD image perfectly!Top.Budgiebrain994.Student Driver Joined: Fri Jan 08, 2016 12:27 pm Posts: 10.Alright, thanks. It looks like most of these things can be avoided by using OS X instead, so I'll proceed to do so.Edit: OS X 10.4 didn't like QEMU on OS X, so it may have been a faulty image I was using in the first place. 10.3 installed fine using QEMU on OS X, but not on Windows - lost mouse cursor through installation menus. Workaround: installed on QEMU for OS X, then moved image to QEMU for Windows. Works a charm.Making a couple optimisations - screen size is flexible, as is RAM, no problems increasing those. I'm now looking into possibly enabling audio, or even video(!) but I'll need to look into whether PowerPC kexts even exist for any available emulated devices QEMU provides.Super happy with the outcome so far. Thanks again Cat_7.Top.Ronald P. Regensburg.Expert User Joined: Thu Feb 09, 2006 10:24 pm Posts: 5681 Location: Amsterdam, Netherlands.Set up this QEMU distribution in OSX 10.10.5 for installing Mac OS X 10.3.I used Disk Utility in OSX to create disk images from the three Mac OS X 10.3 install disks in DVD/CD Master (.cdr) format.I used qemu-img to create a 6G raw disk image for the installation target volume.First installer image is named "10.3InstallDisc1.cdr" Target volume image is named "Qemu10.3HD.dsk"./qemu-system-ppc -bios ./openbios-ppc -boot d -M mac99 -m 256 -cpu G3 -prom-env 'auto-boot?=true' -prom-env 'boot-args=-v' -g 1024x768x32 -netdev user, >Welcome to OpenBIOS v1.1 built on Jan 4 2016 06:04 Trying cd:,\\:tbxi. No valid state has been set by load or init-program.Top.Expert User Joined: Fri Feb 13, 2004 8:59 am Posts: 4723 Location: Sittard, The Netherlands.Please take great care not to have additional line endings in your command file. Did you create the image from your own disks?Top.Ronald P. Regensburg.Expert User Joined: Thu Feb 09, 2006 10:24 pm Posts: 5681 Location: Amsterdam, Netherlands.The whole command is in one line, no additional line endings.I created the images from my own install disks. They are regular retail install disks.Top.Ronald P. Regensburg.Expert User Joined: Thu Feb 09, 2006 10:24 pm Posts: 5681 Location: Amsterdam, Netherlands.This time it works.What did I do different? For creating the CD image in OSX Disk Utility: The first time I selected the CD volume in the left column in Disk Utility (as I normally do) but this time I selected the CD drive.I will report back when I did the 10.3 installation in QEMU.Top.Ronald P. Regensburg.Expert User Joined: Thu Feb 09, 2006 10:24 pm Posts: 5681 Location: Amsterdam, Netherlands.Did a default 10.3 installation from install disks 1 and 2.The 6GB image I created with qemu-img wouldn't work. I could partition it with Disk Utility on the install disk, but the installer labeled it with a red exclamation mark as not suitable for installation. No change after re-partitioning.I tried various images created with Disk Utility on the 10.10.5 host OSX. The only ones that worked consistently as target volume were created with "Hard disk" as value for Partitions:Name: QEMU10.3HD Size: Custom. (6 GB) Format: Mac OS Extended (Journaled) Encryption: none Partitions: Hard disk Image Format: read/write disk image.Top.Ronald P. Regensburg.Expert User Joined: Thu Feb 09, 2006 10:24 pm Posts: 5681 Location: Amsterdam, Netherlands.But now another problem.After completing the installation by configuring the new installed system and an account, I looked at my 10.3 Desktop and everything seemed OK. I shut down the emulated machine and went shopping.Started again QEMU but now startup is stuck at the grey screen with Apple logo.Top.Ronald P. Regensburg.Expert User Joined: Thu Feb 09, 2006 10:24 pm Posts: 5681 Location: Amsterdam, Netherlands.Installed 10.3 again. This time I left out all software that I will not use. Again everything looks OK after installation and setup. But after shutting down the emulated machine, again a new startup gets stuck at the grey screen with Apple logo.Edit: Oops Sorry, startup does not get stuck. It stays longer at the grey screen than I expected.Last edited by Ronald P. Regensburg on Mon Jan 11, 2016 3:28 pm, edited 2 times in total.Top.Ronald P. Regensburg.Expert User Joined: Thu Feb 09, 2006 10:24 pm Posts: 5681 Location: Amsterdam, Netherlands.Top.Apple Corer Joined: Wed Apr 10, 2013 9:32 am Posts: 281.Top.Expert User Joined: Fri Feb 13, 2004 8:59 am Posts: 4723 Location: Sittard, The Netherlands.Disk image creation updated in the guide.Top.adespoton.Forum All-Star Joined: Fri Nov 27, 2009 5:11 am Posts: 2760 Location: Emaculation.com.Top.Ronald P. Regensburg.Expert User Joined: Thu Feb 09, 2006 10:24 pm Posts: 5681 Location: Amsterdam, Netherlands.Installing the combo-update proceeded fine. Now running 10.3.9.The emulator is slow, but usable. With file sharing enabled on the host, I can access files and folders on the host from within the emulator. Will probably work also with other computers in my home network, didn't try yet. With 10.3 drivers for my Canon printer installed, I could probably print to that printer on my network. Didn't try that yet either.1. No sound (known, I suppose)2. I accidentally chose sleep (instead of shut down) from the Apple menu and the emulator froze. No mouse cursor, no reaction on any key press.3. For mounting CD images ("change ide1-cd0" from the Machine menu), the Open dialog only allows choosing .iso files. It should also allow choosing .cdr files. (A .cdr file entered in the command as CD file works fine, and when I change the .cdr extension to .iso the file can be used for mounting from the Machine menu.)Top.gorans.Student Driver Joined: Wed Dec 16, 2015 5:10 pm Posts: 15.I followed the guide, installed 10.4 and updated to 10.4.11. Had a lot of trouble with various cdr and iso images from the net until I ripped my own retail Tiger DVD and installed from there. I lost network after update to 10.4.11.What bothers me the most is the long wait at boot. Apple is displayed for 1-2 minutes and then boot proceeds (verbose). Also the "a" key is "pressed" when switching from host (10.10.5) and QEMU.To sum up, for me it's usable and working but slow.Top.Expert User Joined: Fri Feb 13, 2004 8:59 am Posts: 4723 Location: Sittard, The Netherlands.Thank you for the feedback. Emulation is indeed slow, and loosing network support after updating to 10.4.11 is a known issue.Top.Programmingkid.Apple Corer Joined: Sun Jan 31, 2016 6:01 pm Posts: 242.I just fixed this problem today. Now you should be able to open .cdr files.Top.Forum All-Star Joined: Wed Nov 11, 2009 5:47 pm Posts: 1333 Location: Germany.These are really amazing proceedings! Thanks Cat_7 for providing the self contained package, saving me from the dependency hell. Thanks Ronald for posting your experience with the HD image. Last not least thanks to all developers and contributors making this happen, I would not have believed this until seeing it with my own eyes.I´m installing 10.3 from ISO images on a 10.10.5 C2D host right now. Installing from ISO 1 works fine so far, but after changing boot volume to "c" it looks like nothing is happening - yellow screen for some time, than black screen endlessly.Edit: After removing the CD image from qemu.command it boots! Obviously I have missed that in the guide.Now, could someone please enlighten me how to set up a shared folder? /Classic would be my shared folder on the host, in case that matters. Thanks again!Top.kristerwirtanen.Space Cadet Joined: Mon Mar 28, 2016 4:48 am Posts: 4.Top.kristerwirtanen.Space Cadet Joined: Mon Mar 28, 2016 4:48 am Posts: 4.Top.MetalSnake.Granny Smith Joined: Fri Nov 09, 2007 5:42 pm Posts: 101.I'm trying to get Mac OS 9.1 running using the guide. I'm using the Qemu 2.7-rc0 package linked in the guide and a german Mac OS 9.1 image.When I double click it, I get an error saying it's and old image and needs to be converted.Trying to use that image in qemu with "file=D693-2581.img,format=raw,media=cdrom" gives me this:Then I converted the image using Disk Utility using the read only option, this gave me a .dmg file.trying to use that with the same parameters gives me this:Do I need a different image file?Host is Mac OS X 10.11.6 qemu.command:./qemu-system-ppc -bios ./openbios-ppc -boot d -M mac99 -m 256 -prom-env 'auto-boot?=true' -prom-env 'boot-args=-v' -g 1024x768x32 -net user -net nic,model=rtl8139 -drive file=D693-2581-converted.dmg,format=raw,media=cdrom -drive file=empty_disk.raw,format=raw,media=disk.Top.Expert User Joined: Fri Feb 13, 2004 8:59 am Posts: 4723 Location: Sittard, The Netherlands.You command line seems OK.Please note that you need to put the disk or cdrom entry you want to boot from as first entry in the parameter list and also adjust the boot "c" or "d" setting accordingly.I would assume your images are not OK. Why don't you try first with some sure to work images? Look for 9.1 or 9.22 in the macintosh garden.Top.Page 1 of 7 [ 157 posts ] Go to page 1 , 2 , 3 , 4 , 5 . 7 Next.Who is online.Users browsing this forum: No registered users and 8 guests.

https://telegra.ph/atk-hotkey-xp-driver-02-15

https://telegra.ph/crfxfnm-amd-drivers-autodetect-02-13

https://telegra.ph/ati-rage-mobility-driver-ibm-02-28

https://telegra.ph/bluetooth-driver-stack-download-02-21

https://caribbeanfever.com/photo/945gcm-s2c-audio-driver-download-for-xp?context=user

https://caribbeanfever.com/photo/actions-download-for-photoshop?context=user

https://caribbeanfever.com/photo/945gcm-s2c-audio-driver-download-2018?context=user

cdrom atapi driver

Report Page