Your Family Will Thank You For Getting This Door Handle Replacement
Door Handle Replacement
Door handles may seem like a small detail but if you aren't happy with the appearance of the handles or find them difficult to use, it's worth replacing them. Installing the new handle on your door is easy if you have patience.
Modern door handles are usually equipped with cover plates that conceal the screws to give them an attractive appearance. If your new handle doesn't already have them connected, you'll have to attach them separately.
Removal of the old Handle
The door handle isn't only a decoration for your home, but it's also an important safety feature that lets you to lock and unlock your door. As time passes the door handle could become loose or feel loose. It could also appear aged and worn. This is a good indication that it's time to replace your door handle.
One of the first indications that your door handle requires replacing is when it becomes difficult to operate. This is a serious issue as you will no longer be in a position to lock or unlock the door and put you and your family at risk.
It is also recommended to replace your door handle when it's damaged or broken. A broken door handle can be quite dangerous, especially when your children or elderly family members are unable to open it and end up trapped in the. Fortunately, it's fairly simple to fix a damaged door handle by simply replacing the old one.
The majority of modern door handles are standard size and so they will fit on any door. If you aren't certain if the new door handle you are buying will work, remove the old one and take measurements of its holes in the housing. This will allow you to purchase the correct size door handle.
The easiest way to remove the handle from your door is to take it off of the door. Usually it is a matter of using a screwdriver. Some door handles come with an enclosure plate that hides the screws that mount them. It is necessary to remove this to get to the screws. Once you've removed your old handle, take note of the way the spindle is connected to ensure you are able to be sure to align it when you install your new one.
upvc door handle www.repairmywindowsanddoors.co.uk can also remove the door handle by removing the latch mechanism. This is usually done using a screwdriver but you'll need to locate the small latch, which should be on the edge of the trim piece. Once you've removed the latch, you'll need to unscrew the handle from the strike plate, and then the latch from the door edge.
Remove the Strike Plate
If you are replacing your handle, you'll want to replace the latch plate that holds the hole that the door's latch is inserted into when it closes. The new handles will come with two latch plates: a rectangular and circular plate (see the above diagram which illustrates the components of the door handle). If your current latch plate is rectangular, swap it to a round one so that the latch is able to hook into the strike plate in a manner that makes the handle easier to operate.
The first step is to loosen the screw that's holding the latch plate that was previously in place. The screws are typically tight and require a fair amount of force to loosen them. It might be beneficial to have a second person help with this task if you can.
The latch plate should easily come out of the door after the screws have been removed. If it's stuck or won't move using a nail file to scrape the edges of the latch plate. This may help free the plate up.
Now you can move on to preparing the new door strike plate to be installed. Screw the latch plate into the doorjamb using the wood screws that came with the new handles. Do not overtighten your screws because this could cause damage to the strike plate.
If you're unsure whether the latch plate is in the correct position Try closing and then opening the door to determine if it closes and latches correctly. If it doesn't then you'll have to adjust the strike plate either up or down, or forward or back, until the door closes and latches correctly.
If the door continues to move or jiggles, then you may have to enlarge your latch hole on the strike plate. This is more common on older doors. It can be caused by wear and tear hinges that are too shallow, the incorrect size of the latch or a damaged strike plate. If this is the case, follow the same procedure for adjusting the strike plate, but using an iron file instead of an hammer and chisel.
Removing the Latch
The latch is a curved metal piece that slides in and out of a hole on the inside of your door. The latch moves forward when you turn the handle. It also hooks in the door frame to ensure that the door remains closed. If your door shakes when you close it, a new latch may be all you need to fix the problem.
It's difficult to see the screws that attach the latch to the door, however there's usually a tiny slot on the trim plate that lets you to insert a screwdriver in order to pry it off. After removal of the trim plate you should be able to take off the latch and the bolts that hold it in place and the spindle.
If the latch is not easily removed using a paperclip or tool to remove it from the handle mechanism. Place the item into the slot for the latch that is recessed and then gently twist or jiggle until you feel the that the latch and handle begin to break off. It is possible repeat this process a few times before you can take the latch off.
After the old latch has been removed and the old latch is removed, you should be able to insert the new latch into the slot with no problems. Use the new screws to attach the latch to the strike plate or door frame. Make sure it's correctly positioned in the slot, and aligned with the screw chambers.
Before installing the new handle, be sure to measure your current backset (the distance from the center of the big hole on the front surface of the door to the edge). You should also check that the latch size on the new handle is in line with the measurement of your existing handle.
You'll need a new cylinder for your lock if replacing the latch and handle, or your old one is damaged. If you're not changing locks the new lock will fit into your existing recess, and will work with the keys you have already. Be sure to choose an entry point with rectangular cover plates that match the handles you have.
Removing the Cover Plate
Door handles may begin to look shabby with time If you replace them with a modern lever-on-rose designs, it's a simple and quick DIY and decorating project that can improve the overall appearance of your home. You can purchase complete sets with matching the escutcheons as well as privacy adaptors and escutcheons.
The first step in replacing an internal door handle is to remove the cover plate or rose, which covers the screws and the mechanism within. Utilize a flathead to take off the cover plate. It may have a slot along one edge or be held in place by a pin.
When the cover plate is off, remove the screw that holds the interior handle in place and put it aside. Take off the screws that hold both the inner and outer plates. You can loosen them by using the help of a Philips Screwdriver. Remove the inner plates and latch from the door. Set them aside.
Most doors have an opening between the jamb of the door and the inside edge of the frame that allows for a handle, but not all have. If yours isn't allow for a handle, you'll have to drill a new hole in the door. The process for doing this is the same as for opening a door with a lock, but you'll need to take extra care not to harm the door or frame.
After drilling the holes after which you'll have to put in new door knob screws. Make sure to buy the same size as the old ones, so you don't end up with the handle that is too tight or too loose. You'll also have to install a new latch plate and strike rod that aren't part of the majority of door handle sets.
Amazon's Choice FAERSI 2-piece chrome finish handle sets are a great alternative if you're in search of a premium interior door handle replacement set. It's a factory-fit product and has received hundreds five-star reviews. It's a great option for replacing worn or damaged door handle hardware inside your Chevy HHR.