Wire Stripper
🔞 ALL INFORMATION CLICK HERE 👈🏻👈🏻👈🏻
Wire Stripper
September 5, 2022 September 2, 2022
A minor annoyance that I have with the Irwin wire cutter, though, is that I think its handles are a bit too long. So whenever I open it with one hand to load the next wire I’m about to strip, the handles feel a bit unwieldy.
Single tool combines four functions: wire stripper, cutter, crimper, and pliers
Works with varying wire sizes, from 10 to 22 AWG
Pliers at the tip can be used for pulling and looping wires
For materials with and without insulation
Induction-hardened wire cutting edges ensure longevity
ProTouch grips make it easy to hold, reducing hand and arm stress
Opens a bit too wide, which makes it unwieldy when used with one hand
I recommend the Irwin wire stripping tool, especially if you have large hands. It will let you grab, cut, strip, and crimp wires – allowing you to accomplish all those with just a single piece of equipment.
Although I did not have any issues with this tool, I do have a problem with the company. You see, I once wanted to ask their customer support about their warranty. However, after several emails, I still haven’t received any replies. I just find it disappointing that such an excellent item would have poor support.
Compound-action stripping ensures that stripping wires is a one-hand task
Can accommodate 8 to 20 solid gauge wires and stranded wires from 10 to 22 AWG
Cleanly strips wire insulation up to an inch in a single step
Precision-machined stripping holes ensure accurate and precise wire fitting
Tension loaded grips make sure that the cable won’t misalign during stripping
Poor customer support from Klein Tools
This tool is ideal for those who strip a lot of wires. Even if I did not receive any customer support response, you wouldn’t need to contact them due to its excellent build quality
If there’s an issue I encountered with this tool, it’s that some of the teeth in the size gauges were a bit jagged, so I couldn’t fully close it at the start. After filing down the rough edges a bit, I finally used the stripper with no problems. Other than that, I’m happy with my multi-functional tool.
Cuts and strips copper and aluminum wires from 10 to 22 AWG
Serrated nose can grip, pull, shape, and bend wires
Ergonomically-designed curved handle makes it easy to hold and use
High-quality PP+TPR handle optimizes force transmission and reduces slippage
Excellent quality assurance policy with both replacement and refund guarantees
Some of the teeth in the size gauges required some filing
I would recommend this tool if you like to keep your kit clean and straightforward. With this in your pocket, you can leave your pliers behind and still accomplish your work.
An issue I encountered with this tool is that the size markings are a little hard to see. However, they’re not unreadable, so I can still determine which wire setting to use.
Works in a simple one-handed motion, making it easy to use
Doesn’t damage the conductor
Built-in wire cutter can be used on copper and aluminum wires from 10 to 22 AWG
High-quality spring reduces the effort required to operate the tool
Safe handle design helps prevent accidents by preventing finger squeezes
Soft rubber handles with surface coating ensure the tool wouldn’t slip
Markings on the tool are not very easy to see
If you’re a careful user, you can use this sound tool for regular wire stripping. It’s also focused on safety, which can help prevent accidents and injuries while on the job.
You have to be careful, though, when you’re using the tool when it’s new. This is because it is still highly-tensioned, and you might end up cutting your wire instead of stripping it if you apply too much pressure. I highly recommend testing this on spare cables that you have before using it in an actual project so you could get used to it.
Automatically adjusts stripping diameter based on wire cross-section
Strips wires from 0.03 to 10 mm in diameter
Sharp stripping edge will not hurt core due to automatic adjustment
Adjustable length stop
Lightweight, durable body withstands rough environments while staying handy
Blades can be replaced for future use
Highly-tensioned when new, can accidentally cut wires if the user isn’t used to it
All in all, this product works wonders for who handle various different wire gauges simultaneously and like to keep their kit light. It’s perfect, especially for freelance contractors who work on their own a lot.
My only wish is that this vise grip self adjusting tool should come with a wire cutter, as it’s what most people typically do with wire-work. Since this tool doesn’t have the feature, I have to bring an extra pair of pliers in the field, which adds to the weight that I’m carrying. Otherwise, I think it’s a perfectly nice tool to have.
Comes with a lifetime guarantee
Strips wire from 10 to 24 AWG
With adjustment knob for wires smaller than 20 AWG
Crimps insulated and non-insulated 10 to 22 AWG wires, 7-9mm ignition terminals
Self-adjusting mechanism automatically accommodates cables of different gauges
Built-in stopper can be adjusted to customize stripping length as desired
No built-in wire cutters, so you need to bring an extra tool in the field
If you don’t mind carrying an extra pair of pliers, I would definitely recommend the Irwin Automatic Wire Stripping tool. It will also simplify your workflow because you don’t have to check the gauge for every strip.
The only problem that I encountered with this is that the stripper came in a bubble envelope. It wasn’t damaged by any means, but I wish the packaging were more sturdy.
Cuts, strips, and loops 10 to 18 AWG solid and 12 to 20 AWG stranded cables
Strong enough to cut 6-32 and 8-32 screws
Curved handles allow you to reach small and tight spaces easily
Double-dipped grips enhance user comfort and reduce stress
Easy-to-read markings lessen eye strain and prevent headaches
All in all, professionals who work in cramped spaces would love this tool. Its well-printed markings are also excellent for those who have trouble reading the small prints of other strippers.
A friend of mine who was using this tool, though, had his equipment get damaged while he was using it. I haven’t encountered this problem yet, so it must have been a factory defect. Nevertheless, it was quickly resolved because Tacklife responded to his issue within 24 hours.
Strips, cuts, and crimps wires in the 10 to 22 AWG range
For terminals in the 4 to 22 AWG range and 7 to 8 mm² ignition cables
8-inch flexible spring and extended plastic grips increase force applied
Two-color non-slip TPR handles make it easier to hold and reduce stress
Automatically adjusting jaws ensure correct stripping every time
Adjustable nuts and stoppers allow manual setting for precision
A friend of mine damaged his tool while he was using it
This wire stripping tool is a good choice if you want to leverage your force. Its extended handles allow you to use less effort in stripping and crimping, reducing your stress.
My only concern is that the tool is not as well-balanced as I would like it to be. I find its head to be substantially heavier than the rest of its body, which makes me feel like I’m holding a hammer. Nevertheless, it has excellent cutting performance, which dramatically compensates for this issue.
Precise construction strips wires from 8 to 22 AWG with no damage risk
Built-in tension-loaded grip automatically returns the tool to its default position
Fast, compound action for wire-stripping lets you do more in less time
Made from cast alloy chassis, making it a bit lighter than other competitors
Comes with a 10-year manufacturer’s warranty
Tool is a bit heavy on the head and feels unbalanced
If you need a device that will reliably strip your wires without damage, this is the tool you need. As long as you don’t mind its unbalanced feel, you’re going to love this.
My only concern is that the wire would sometimes slip when I strip it. Good thing I can use the pressure adjustment knob to set the proper amount of force, but I wish there were a way to put it automatically. That way, I could work even faster and reduce the chances of damaging the wire insulation.
Easy and intuitive to use, with a unique color scheme allowing it to stand out
Accommodates cables from 14 to 24 AWG & designed to work with speaker wires
Easy-to-adjust length-stop marked on jaws for clear reading
The automatic design adjusts blade no matter the wire gauge
Built-in cutter accommodates cables up to 12 AWG
Wire would sometimes slip during stripping; manual pressure adjustment needed
I feel this is the best wire stripping tool I have ever used because of these features. As long as you don’t mind manually adjusting the pressure, I feel this is also suitable for you.
My only issue with this is that the numbers are not as clear as I like them. They don’t affect my performance in any way, but someone with poor vision might not feel the same.
Designed to strip and cut 10 to 22 AWG stranded and 12 to 24 solid-core wires
Crimper for insulated, non-insulated terminals, wire sleeves, and various connectors
Wire cutters are strong enough to shear copper screws and 10-22 bolts
Non-slip rubber handles make it ergonomic to use and reduce user stress
Comes with a lifetime warranty
If you need a wire stripper that’s also robust enough to deal with screws and bolts, this is the perfect tool for you. It’s ideal for those who install electronics and deal with screws that need adjustment.
You have to be careful when using this, though, as it is sharp. If you’re not cautious with your stripping, you might accidentally cut the thin wire. I had actually sliced a couple of cables with this stripper when it was new, so I recommend practicing first before using this in the field.
Explicitly designed for precise stripping and can work with 20 to 30 AWG wires
CNC-lathed notches ensure precision
Can strip both CAT5 exterior cabling and its interior strands
Lightweight design perfect for working with light and thin cables
A safety lock to ensure it won’t damage wires or tools it’s stored with
Extra sharp stripping requires practice to avoid accidentally cutting wires
If you’re working with electronics and networking cables, which require delicate and thin wires, then this is the stripper that you’re looking for. So far, I haven’t seen any other stripper that offers the same precision as this.
Galvinpower aspires to bring everyone the best information through product testing and reviewing. We aim to share what we have tried and thoroughly research to help people setting up a safe home for their loved ones. Through our work, visitors to the site can figure out what’s best for them and their families.
Categories
Select Category
Cord Management (62)
Electrical Ballasts (9)
Electrical Boxes, Conduits & Fittings (6)
FAQs (21)
Fuses, Circuit Breakers & Safety Switches (221)
Soldering (10)
Copyright text 2022 by Galvin Power
Galvin Power is reader-supported. When you buy via our links, we may earn a commission at no cost to you. Learn more
Many people think that stripping wires is such a mundane job that a good wire stripping tool is just a luxury. However, if you’re a professional electrician working with miles upon miles of wiring, having the best wire stripper on hand is a life-saver.
A cable stripping tool can save you time and effort, especially if you’re wiring an entire house. I’ve once experimented comparing outlet installations using a pair of pliers versus electrician wire strippers. I found that an experienced worker can save at least one minute per wire or six minutes per outlet.
On average, each home has seventy outlets. This small device would save me at least seven hours per home in outlet installation only. It doesn’t even include the other tasks where I’ve saved even more time. You’ll definitely save time and manpower if you have an electrician wire stripping tool.
So today, I’m going to review the twelve best wire stripping pliers I’ve seen or used. These are my top pick reviews and are written to help you choose the best tool for your purpose, allowing you to do more in less time, improving your job performance.
This is the ultimate handy wire stripper for me because it combines four tools into one: wire stripper, wire cutter, wire crimper, and pliers. It’s versatile enough because it’s designed to work with multiple wire sizes, from 10 to 22 AWG. And you can use the pliers at the tip for pulling and looping wire.
Furthermore, the Irwin stripper has built-in wire crimps that can be used on insulated and non-insulated materials, ensuring that you have secure terminals. You can use just this tool to complete a whole outlet installation – meaning you’ll also save on weight with a lighter toolbox.
The wire cutter’s edges are also induction hardened to make sure that they will last as long as you need them. But the best thing that I like about it is its ProTouch grips, which make it easy to hold and reduce hand fatigue and arm stress, even if I’m wearing insulating gloves.
Klein wire strippers are also one of the tools I recommend for professionals. I like this model because of its compound-action stripping, which allows you to grip the wire and then strip it one squeezing action. This makes wire stripping a single-handed job, allowing you to be more efficient in your workflow.
This Klein tools wire cutter and stripper combo can accommodate solid wires from 8 to 20 AWG and stranded wires from 10 to 22 AWG. It can also cleanly strip insulation up to an inch (25 mm) in length in one step. You don’t have to manually pull the wire to expose the conductor inside, as the tool will do that for you.
An issue that plagues some strippers is their inaccurate measurement, which can lead to wire damage during stripping. To avoid this issue, Klein Tools precision-machined the stripping holes, ensuring they fit the indicated gauge. Finally, the wire grip is also tension-loaded so that the stripped cable will hold its geometry and not be bent out of shape.
This is one of the electrical wire stripping tools I’ve previously worked with. It can cut and strip solid copper and aluminum wires from 10 to 22 AWG. I can also use its serrated nose to grip, pull, shape, and bend wires, negating the need for me to use and carry an extra pair of pliers.
I also appreciate it well when tool makers consider the user in their design, and WGGE is one such tool maker. Their tool’s curved handle is ergonomically designed, making it easy for me to hold and use. I also like the high-quality PP+TPR material they used to cover the grips, optimizing force transmission and reducing slippage.
Best of all, the company has an excellent quality assurance policy. If ever you’re unhappy with your wire stripper, they will either send a replacement tool or even issue a refund. I will always respect a company that guarantees its workmanship and stands behind its products.
This small wire stripping tool allows you to strip wires in a simple one-handed motion. It will grab hold, pull, and remove outer jackets cleanly, ensuring that the conductor won’t get damaged in the process. When you have this tool, you can streamline your workflow and finish more tasks.
The Dowell wire stripper comes with a built-in wire cutter , which lets you cut copper and aluminum cables from 10 up to 22 AWG. It also utilizes high-quality springs, which reduce the effort required to operate the tool. This feature lets you accomplish more with just a hand.
I also love the handle design of this wire stripper, which prevents accidental finger squeezes while in use. The brand also utilized soft rubber handles with a surface coating to ensure that the tool wouldn’t slip from my hands even if I’m working in wet or oily conditions.
If you work with many different wire gauges simultaneously, you should look for the best automatic wire stripper models. They’re called as such because they automatically adjust their stripping diameter based on the cross-section of the wire you’re working on.
This Knoweasy tool can precisely strip wires from 0.03 to 10 mm in diameter without having to readjust its settings. Because of this, its sharp edge will not hurt the wire core even if its gauge changes unexpectedly. It also has an adjustable length stop, so you are guaranteed to only strip the needed length.
The tool’s lightweight and durable body is made from shock-resistant glass fiber and plastic. This ensures that it can withstand rough construction environments rigors while being handy and easy to carry. Furthermore, its blades can be substituted, so once the original edges have worn down, you only need to replace them and not the entire tool.
One criterion I look for in the best self adjusting wire stripping tool is the maker’s guarantee on it. That’s why I recommend the Irwin Vise Grip Self Adjusting Stripper – it comes with a lifetime guarantee. This assurance gives me peace of mind that this tool will last me a lifetime and won’t break when I’m using it.
When stripping wires, the Irwin Vise Grip Self Adjusting Wire Stripper can accommodate wire sizes from 10 to 24 AWG. It also has a micro-adjustment knob which allows me to fine-tune its cut for gauges smaller than 20 AWG. I can also use this tool for crimping 10 to 22 AWG insulated and non-insulated wires and ignition terminals from 7 to 9 mm.
But the best thing I like about the Irwin stripper is its self-adjusting mechanism. Now, I no longer have to manually check the gauge of each wire I’m working on. I can also adjust the length of the strip with its built-in stopper. These features make me much more efficient, allowing me to improve my workflow and accomplish more.
If you need a heavy-duty professional wire stripping tool that you can also use for shearing, this is the right choice. It’s designed to cut, strip, and loop 10 to 18 AWG solid and 12 to 20 AWG stranded cables. It’s also strong enough that you can also cut 6-32 and 8-32 screws.
The Klein Tools Wire Cutter and Stripper has curved handles, specifically designed to help you reach small and tight areas – useful when you’re installing outlets and working in small electrical boxes. Other than that, the handles themselves are double-dipped to enhance user comfort. That allows me to reduce my stress and lets me work faster.
Best of all, its easy-to-read markings are a huge benefit to most professionals. This is because frequently, we have to work in dimly lit areas. I appreciate the well-printed letterings on the tool body because they reduce eye strain. Thus, it helps me prevent headaches that sometimes come from too much squinting in the dark.
Tacklife offers one of the best large wire stripping tools that I’ve worked with. It can strip, cut, and crimp 10 to 22 AWG wires. It can also work on various terminals of various sizes, including insulated (10 to 22 AWG), non-insulated (4 to 22 AWG), and ignition (7 to 8 mm²).
The tool itself has an 8-inch flexible spring and extended plastic grips, allowing you to increase the force applied without putting in more effort through leverage. It also has two-color non-slip TPR handles which make it easier to hold. These attributes allow you to reduce your hand and arm stress, letting you accomplish more.
It also comes with automatically adjusting jaws, so you’re sure that whatever gauge you’re working with, your tool will strip it properly. Furthermore, it also
Female Sensual Erotica Video
Xnxx Russian Homemade Collection Sex Ride
Xxx Moms And Sperm Hd