Why You Should Forget About Improving Your Lock Replacement
Door Lock Replacement - What Are the Different Parts of a Door Lock?
Faulty door locks could make your home an easy to target for burglars. Changing your lock can be an affordable way to increase security without making your doors unusable.
A lot of locks come with a cardboard model that you can use to wrap around the edges of your door to ensure that it is properly fitted. This will ensure that you don't buy the wrong lock.
The Cylinder
The cylinder is the primary element of a mechanical door lock. It houses a set of spring-loaded pins which ensure that the door is locked when there is no key put into the hole. When keys are inserted into the doorknob, the uneven edge pushes up onto the pins in the cylinder, which allows them to be inserted to their correct positions. When the pins fit they allow the bolt, also referred to as the latch to move forward, and then engage the door's interior.
RepairMyWindowsAndDoors extends out of the cylinder and then into the box, a hole is then drilled into the door frame. The box is designed to fit the bolt snugly so that it won't be pulled open easily. A clip spring keeps the bolt retracted when the door is closed. When you turn the handle, a spindle is designed to rotate inside the cylinder. The bent end retracts into frame of the door when the spindle has finished rotating. The bolt rests on the carved out area of the doorframe and locks the door until you are required to reopen it.
A faceplate is an inside metal plate that is attached to your door on either side of the hole that is used for the deadbolt. Its function is to protect the mechanism that locks your door from damage caused by your knob's continual removal and insertion. If you're installing a brand new lock, make sure the faceplate aligns with the hole in your door frame and that it's securely fastened to the plate and to the bore of your latch.
If you're replacing the door lock, make sure that the deadbolt fits properly by sliding it into the strike plate's opening hole. After that, screw the strikeplate and the lock's core into the appropriate position. Be careful not to tighten too much because this could damage the latch and prevent it from fitting into its groove properly. It's a good idea test your new lock by turning the key while it's in the locked position. If you notice any issues, such as loose latches or a loud deadbolt it's time to replace the old lock with a brand new lock.
The Faceplate
A faceplate is an oversized flat plate that is attached to the lathe's headstock to hold the workpiece. The screw thread is wound into the wood via the series of screw holes. Faceplates can accommodate various designs, but they have to be positioned in a stable, fixed and balanced position that aren't simple tasks if compared to the ease of using an tool chuck.
A typical faceplate is equipped with several mounting holes, in this instance three placed at 120Adeg spacing to receive the workpiece mounting screws 18 of FIG. 2. The screw holes can be manufactured using an insert that can be interchanged or directly into the faceplate body. The faceplate has a stepped area in the middle which acts as an index mark to locate an exact location on the blank workpiece.
The stepping region is abrasion resistant so that the fastener will not cause damage to the chisel that is used to cut it. The body's surface of the faceplate has different properties from that of the surrounding region and machining into this region warns the turner to possible contact with a fastener and gives the turner time to react.
Screws used to hold a faceplate in place should be of a size that fits inside the screw hole with only a little free play. There shouldn't be a gap left behind the screw when it is tightened onto the block of glue, as this can cause the block to shift when turning. A larger-gauge screw will also fit more securely into the faceplate. The screw should be inserted into the middle of the screwhole in order to reduce the possibility that a screwhead might come into contact with the workpiece.
The Strike Plate
The strike plate is an essential element of your door lock. The strike plate is what keeps the bolt from sliding when you close the front door. The strike plate is also what helps to reinforce the strength of the lock and stop intrusions by using force against the latch bolt and jamb.
A strike plate is a heavy metal plate that installs in the doorjamb (the vertical part of the frame) with a hole for the latch or deadbolt to pass through. When the cylinder turns, the bolt is released from the strike plate into doorjamb and keeps it closed.
There are many different kinds of strike plates, based on your needs. If you require a strikeplate that will fit your lock, the information will list the type of strikeplate you need. In other cases, most strike plates are similar and will work with most standard locks and latches.
Most strike plates come with ovular screw holes and an "C-shaped" piece that acts as a washer. They are often used on doors that have corner rounded edges. They come in different sizes to match the door.
For additional security, you can opt for strike plates with no lip and is created specifically for deadbolts. This is a good choice for areas that need to be secured quickly, for instance stairwells. This is an excellent option for those who want to secure the equipment or documents in your home.
Another method to increase the security of your door is to install a box strike plate, which adds strength and thickness to the strike plate. This makes it harder to break into the door by using the latch or deadbolt. It's usually required for commercial doors with a security lock.
If your strike plate isn't aligned with the latch bolt try spraying it with a quality lock lubricant. If this doesn't work, you'll have to adjust the strikeplate by drilling new screw holes and widening the hole for your catch. Be cautious not to make numerous adjustments to the strike plate since repeated and extreme adjustments can weaken it to the point that it's no more effective.
The Deadbolt
A deadbolt lock is a strong bolt made of metal that secures your door to the frame of the doorjamb. Deadbolt locks differ from a spring latch found in doorknobs. Instead of being able to be locked using credit cards or by using professional tools, such as latch slips, it is able to be locked with the use of a key, thumb-turn or electronically. They are easier to use and require less maintenance. They also provide better protection against forced entry methods like kick-ins.
The bolt extends from an socket inside the doorjamb which is strengthened by a strike plate for additional security. The bolt should be a minimum of 1 inch of length to make it more difficult to remove the door. It is also essential to select a deadbolt with an ANSI rating which signifies how securely the lock has been tested.
The strike plate also helps to hold the cylinder in place. Three holes should run across the bolt. The one in the middle connects the facepiece to the cylinder and the remaining two are on either side of the central hole. The screws are inserted into these holes to join the bolt and cylinder. The screws should be standard with the new deadbolt. Some locks come with covers that snap on the facepieces. Consult the manufacturer's instructions to ensure that these are installed correctly.
When choosing the lock for your house, you should consider your lifestyle and the level of security that you need. Single cylinder deadbolts, which are the most commonly used lock type are used on many exterior door. Keyless deadbolts are more secure however they can be difficult to operate. Smart deadbolts allow you to lock and unlock them with voice commands, or through an application on mobile devices.
A professional locksmith can assist you in determining which type of lock is best for your home and will install or replace the lock. Upgrade your front door lock to enhance the security of your home. To provide additional security, think about adding a reversible double-cylinder deadbolt on the inside of your door, too.