Why You Should Be Working With This Replacing Lock On Upvc Door
Replacing Lock on uPVC Door
If you're looking to change the lock on your upvc door you'll first need to remove the handle and screw holes. This is generally simple to accomplish.
Next, locate the screw that secures the barrel of the lock. This screw is usually a different color than the other screws, and is situated on the outside of the lock faceplate.
Take the Cylinder off
The first step in changing the lock on your upvc door is to take off the current cylinder from the door. This is a simple process that takes around 30 minutes. All you need is an ordinary screwdriver. The Euro Cylinder screw is normally located on the inside of the door, right next to the lock cylinder. The screw must be easily identified as it is usually a different colour to the other screws. Remove this screw and keep it in a safe place.
After removing the cylinder, you can begin to remove the handle. To do this, simply open the door so you have full access to the inside edge of the door as well as the side of the faceplate of the lock.
Take off the screw that connects the handle to the door using the screwdriver. Once the screw is removed you should be capable of pulling the handle toward you and the rest of the mechanism should be removed from the door.
If you're having difficulty getting the handle off the door frame, you may need to remove it. You can make use of a screwdriver or a drill to remove the handle. Be careful not to strip or cross-thread it.
If you are about to replace your cylinder, ensure that it is the right size for your door. Cylinders are measured according to two measurements: (a) the distance from the middle of the Fixing Screw hole to the bottom of the cylinder and (b) the distance between the keyhole and the edge of the lock plate.
Remove the Handle
If your upvc door handle becomes stiff or loose, the good news is that it is a relatively simple issue to fix. The reason is usually due to wear and tear on the cylinder or internal parts of the multipoint lock, that are located inside the door between the handle and the frame. It is not uncommon for upvc locks to get worn due to weather conditions, heavy usage or simply aging. This will often lead to problems with the locking mechanism or closing mechanism of the door.
The cylinder could wear out and make it difficult to turn the key. The lock could also become stiff, causing the handle to drop. This can be resolved by replacing the cylinder which is a simple procedure. It is possible to do it yourself, though some understanding of how the mechanism works will be required. You'll need to take off the handle to be able to replace the cylinder.
You'll need a screwdriver, and a measuring tape to accomplish this. It is essential to know the exact size of your cylinder, so that you can purchase a replacement that fits. The cylinder is the component that lets you lock your upvc door. Therefore, it is essential to ensure that you get a replacement of the same size.
To remove the old cylinder, it is need to take off the screws that secure it. You should be cautious not to pull out the screws, as this could make it difficult to remove the screws in the future. After the screws have been removed, the cylinder should be easy to remove.
Take out the Lock Barrel
Upvc is a very durable material and designed to ensure that you and your family are secure. They are available in a wide range of styles and colors that will fit into any home decor. These doors are also efficient in thermal energy and maintenance-free. However, they are not without their drawbacks. The locking point, also known as a barrel lock, may become faulty in time and requires to be replaced. It's a simple process, but you should be aware of a few things before you begin.
You'll have to take off the door handle in order to access the screw that holds the lock cylinder in place. The screw is usually a different color from the other screws and can be found near the keyhole on the outside of your door. Take out this screw and put it in a safe place. Slide the handles out on both the inside and outside of the door. Be sure to do this slowly and not too fast, as it may damage your uPVC door.
After removing the handles and removing the handles, you can use a screwdriver to remove the screws that hold the handles to the door frame. This will enable you to better access the pins that hold the cylinder in position. You can then wiggle and tug the cylinder to see if this helps loosen it. If it does, pull it towards you, and then pull it out of the socket.
After removing the old cylinder lock, it is essential to replace it with a new one which includes anti-snap protection as well as anti-bump. It is recommended to have an expert locksmith handle this for you, however you can do it yourself with the appropriate tools. It's a relatively simple job that should take only about five minutes to complete.
Install the New Cylinder
A upvc door lock can be broken or damaged in many ways, for example, a tenant may have moved out but not returned the key or the cylinder could have become damaged and no longer works as it should. It is important to choose the right size replacement for your door's upvc lock. If the wrong lock is installed, your doors may be more susceptible to the 'lock snapping method that is responsible for 25 percent of burglaries.
To avoid this it is vital that the correct cylinder is installed and the procedure for doing it is a breeze and only takes about five minutes. To change the handle faceplate and the cylinder you must remove the screws attached to them.
Before you begin be sure that the handle is in a position to open and that you have full access to the inside edge of the door as well as the side of the handle faceplate which holds the lock cylinder. This will let you easily remove the lock cylinder from the handle without having to move it and expose the inside of the frame.
Then, take out the old cylindrical device and take a measurement of it. You'll need to know the length of the cylinder and the size of the cylinder which is used to lock or open the door. This will help you locate a replacement cylinder that is the same or smaller. This is the most crucial part of the whole procedure. The cylinder should be flush with the handle, and not extend more than 5mm away from it.
Install the Handle
It is not uncommon for a door lock made of upvc to become jammed and this can be caused by something breaking inside the case that controls the bolts that retract into the strike or keep plate. Often this can be resolved by making an Allan key adjustment beneath the hinges of the door but sometimes this can cause excessive pressure on the parts inside the centre case and it is better to seek the help of a professional.
It is important to have quick and easy access to both sides when changing the handle. Additionally, it is crucial to use the right tools. It is a good idea also to raise the door to ensure that it doesn't close during this process.
The first step is to loosen the screws that hold the handle together using a screwdriver. Once the screws are loosen, you can remove the handle. Once the cylinder and handle have been removed, it's now time to install the new handle. Make sure that the new handle is of the correct size for the cylinder you have currently and hole in the center. Verify the length of the spindle on the lever that you have to determine this. Also, ensure that source website fixing centres on the handle match the screw fixing centres on your existing hole centre and cylinder.
Replacement handles from Fab and Fixed are available in different styles and are built to last. They are perfect for those who want to upgrade their upvc handles and increase their home security. The right handle will ensure your home is safe and secure, making it difficult for burglars to break into.