Why Replacing Upvc Window Handles Is Right For You
Replacing uPVC Window Handles
The replacement of window handles made of upvc is an easy task. It is crucial to ensure that the replacement handle fits into the spindle cutout in the window mechanism.
If the steps listed below are followed correctly the cockspur handle will fit in most windows. The most important factor is the step in the height of the handle.
What to Find
Over time, uPVC handles on many windows in the UK can start to show signs of wear and tear. The handle on the window may become loose or difficult to operate when this occurs. This is a simple job that can be accomplished by anyone who is comfortable with basic hand tools.
The first step is to make sure that the handle is securely fixed to the frame of the window in its open position. The next step is to find the fixing pins or screws that keep the handle in the position it is in. They are typically located on the inside of the handle. They can be removed with a screwdriver and pliers.
Once the handle is loose it can be taken from its hinges by gently pulling off. Then, you'll have to locate a new handle that is the same size and style. This can be accomplished online or at a local DIY store, and it should take about five minutes with a screwdriver.
One important factor to consider when replacing the uPVC window handle is the step height. This is the distance between the handle's base and where it is placed within the frame of the window. This is a standard measurement, and you should verify the height of the step prior to ordering the replacement handle.
There are various sizes depending on the kind of handle. Inline handles for uPVC windows generally feature lug centers of 31mm There are also varieties of cockspur handles with 43mm centres. Tilt-and-turn handles are commonly found on uPVC windows. They feature a unique design which allows the window be tilted to allow for ventilation, and then turned to fully open the window.
The most frequent breakage in uPVC handles is that they crack inside rather than breaking off from the base section. This can make it difficult to open. It is important to make sure that any replacement handle has the same spindle as the original one.
Remove the Old Handle
Incorrectly fitted or damaged window handles can cause your double-glazed windows to open and close incorrectly, and can cause them to become stuck. This could be due to various reasons, including general wear and tear on the metal handle or corrosion. In these instances, it is important to seek replacement upvc window handles immediately to avoid further damage and loss of functionality.
When replacing the handles on windows made of upvc and handles, it is important to remove the old handles from the window. To do this, begin by getting rid of the screw that is covered when the handle is in the closed position. This should reveal another screw and once removed, you can then begin to remove the handle itself. You can make the process easier by using an electronic screwdriver.
You should also be aware that screws could be hidden beneath caps made of plastic. It is best to remove the covers with a Stanley knife. After the old handle has been removed, you must examine the square cut on the base of the handle to ensure that the new window lock handles are compatible with it. It is important to measure the spindle length on the handle that was used and then compare it with the size of the window mechanism spindle cutout.
The different types of window handles made of upvc are: Espag handles, which have a central screw and can be turned left or right; Cranked handles, which have two screws and are used on tilt and turn upvc windows as well as Spade handles, that have a flat arm and can be used on either side of the window. It is easy to replace the handle when you have found one that is suitable. Just put it in place and make sure the spindle is correctly inserted in the lock mechanism. After you have done this you can tighten the handle onto the window frame. The replacement upvc handle will now be secured.
Measure the Spindle
If you're replacing a upvc window handle that has come off, it is likely because the spindle holding it in place has become damaged or loose. In some instances, this could be fixed with pins or screws to tighten it. In other situations, it will have to be replaced completely. There are a few different kinds of window handles made from upvc. They include espagnolette handles that are inline as well as cockspur handles. tilt and turn handles. Each type of handle is installed and replaced in a different way.
Before you purchase a new handle, it is important to know the dimensions of the handle that is currently in use. This will ensure that the handle will fit the window in a proper manner and will be the right size. Fortunately, all handles adhere to industry standards of sizing making it relatively easy to identify the right size.
To measure the size of your handle first, remove it from the window by turning it to an open position. You should be able to determine the size of the screw or pin that holds the handle. Use a ruler or tape measure to determine how long the spindle is. Once you know the length of your spindle, it is possible to purchase a replacement that is the exact same length.
When purchasing a replacement you should take into consideration the step height of the upvc window handle. The step height is measured from the base to the point where the handle sits on the frame. In general, this is approximately 21mm for uPVC windows or 9mm for aluminum. Dropping repairmywindowsanddoors.co.uk in the space will allow you to see how far the handle extends before it comes into contact with an obstruction.
Cockspur handles may have different backsets based on the style of window you install them in. Inline espag handle heights are 43mm from the centre to the centre (two fixing points). Cockspur handles have different backsets based on the window they are located in. This is because they feature spurs that extend from the handle and is secured over the cockspur wedge striker plate.
Fit the New Handle
After you have chosen the new handle, ensure that it is aligned with the screw holes on the door. Secure it using the screws provided. If you're replacing the latch lever it can be put in similarly to the door handle. Then, attach the door trim once more to conceal the screws for mounting.
Tips: To take the metal head from the wedge made of wood, hold the handle so its longer end is resting on the floor. Use a hammer to tap on the thin end of the handle. Be careful not to damage the handle or handle spindle.