Why Do So Many People Are Attracted To Dual Fuel Range Cooker With 13amp Plug?
Dual Fuel Range Cooker With 13amp Plug
Are you a cook at home who loves the responsive heating control of gas cooktops but wants an electric oven for baking? Find a dual fuel cooker that has the best of both worlds.
Gas cooktops are preferred by many home chefs with experience in the kitchen because of their superior temperature control. They also allow them to utilize advanced cooking techniques like grilling. These powerful stoves are expensive particularly if they require an extra gas connection and an electrician to install them.
What is a 13amp plug?
If you have dual fuel range cooker (also called a gas and electric oven) is required, you'll need an appropriately rated 13 amp plug. The plug must also be hard-wired by a licensed electrician into the cooker ring.
This ensures the current flowing through the plug will not exceed the safe limit which could cause an electrical fire. The current is controlled by a fuse within the plug. The fuse will blow as soon as it is deemed to be overloaded. This protects the appliance from overloads of electricity.
The fuse is rated 13 amps, which is shown on top of the plug. This is the maximum amount of current that the plug can pass without damaging the appliance or heating the socket. It is crucial that when replacing fuses, you always use the same rated amperage as the original. There is a risk of overheating a socket when you replace a fuse with an unrelated rating.
A 13 amp fuse is likely to be a ceramic one, which is very durable and can withstand the high temperatures generated by a range cooker. The ceramic element is also fire-proof, which makes it a better choice over other types of fuse.
There are many ways to install a 13 amp plug. The plug can be connected to a live socket by using a screw or plastic jaw cord clamp. The plug should be put in place with a firm push and then tightened, making sure the clamp is secure.
Some plugs will include a wiring diagram on cardboard over the pins. These should be removed before connecting the wires. It is essential that the wires are trimmed to the right length, as leaving them too long can cause them to break when the plug cover is replaced. The earth wire should be the longest to ensure that it is connected prior to the neutral and line pins.
How do I fit a 13amp plug?
The vast majority dual fuel range cookers sold in UK are powered by an amp rating of 13 amps. This is important because ovens can draw significant current, and standard plug sockets only have a 10-amp rating.
Generally speaking, new appliances must be fitted with plugs at the time of sale. This is all part of complying with the Plugs and Sockets etc (Safety) Regulations 1994. However, older appliances may not have the plug, and this is where the issue arises.
When connecting a cooker to an existing plug socket the first step is to make sure that the rating of the fuse in the box is in line with the plug's rating. This is important because an incorrectly-sized fuse can be dangerous.
freestanding dual fuel range cooker is also recommended to ensure that the fuse has been completely seated into the cartridge, and there isn't any movement. The next step is to prepare the flex that is to be used. Take off the sheathing and reveal the three conductors that are insulated. Then, cut the sheathing near the entry point to the plug (beyond the cord grip) using a utility knife, without piercing the individual conductors that are insulated. This nick should be wide enough to allow the sheathing to split and then expand when it is pulled back, revealing the cable underneath. Cut off the excess sheathing, leaving a little more than 40mm over the flex.
This flex should be placed over the plug with the earth terminal on top and the live and neutral terminals on the bottom. Using the conductors with the colors to guide you and the sheathing is removed from each pin, and the internal cable is fixed to the correct terminal using the cord grip. If the plug is fitted with an screw-type clamp for cords loosen it, and then pull back the insulation to expose the copper conductors. Connect each insulated wire to the appropriate terminal by using the channel inside the plug. Begin with the earth conductor first, then the neutral and then the live.
What is the maximum draw of a 13 amp plug?
The maximum current draw of an 13amp plug is 3kw at 230 volts. This is quite a bit of power, but the standard fuse fitted in the UK plugtop will not fail until the cable is heated to a risky temperature. A faulty plug or socket may result in a fire, therefore it is important to be vigilant about how much you are using, especially in the kitchen.
The ceramic fuses that are used in plugtops are approximately 25mm and are suitable for mains voltages of 240V. They will feature an BS kitemark or similar mark on the side and will contain sand. There are plastic or glass alternatives but they should never be used with a live plug, unless you want to blow the fuse and potentially get electrocuted!
Most dual fuel range cookers sold in the UK require hard-wired and will not plug directly into the wall socket. They are typically connected through a separate cooker circuit which is only suitable for appliances with a maximum of 20 amps.
Check the ring circuit of your home using the fuse box, or call an electrician in your area. You can ask them if the sockets are connected to the same ring, or if they are separate. They should also be able to inform you if there's a dedicated circuit to power your oven.
The size of your kitchen is a major factor when you're looking to purchase a dual fuel range cooker. We have a wide range of cookers that will fit any space. Pick from compact 50-60cm dual fuel models or huge 90cm+ double oven options by leading brands such as Rangemaster and StovesAreUs.
If you're looking for something different, don't worry - we also have a wide selection of electric and gas multi-functional cookers. These versatile machines let you cook a variety of dishes, including curries, casseroles, and pasta!
Explore our complete range of Cookers in Currys online or head in-store to browse. We provide free delivery and home installation on select range cookers, and we also offer flexible payment options. If you have any questions our team is on hand to help - just drop us an email or give us a ring. Credit is subject to the status of the account, and terms and conditions apply.
What is the maximum current draw of the cooker switch?
There is a lot of confusion regarding the maximum current draw for the cooker switch. Most cookers are hard-wired and connected to an oven-ring circuit and not the standard socket. It is because they often consume more than 20 amps when the gas hob and electric oven are in use.
There aren't any dual fuel range cookers that can be fitted in a standard socket since this could pose a significant fire risk and infringe electrical regulations. An experienced electrician will install any new electrical components to an appliance in the kitchen and will make sure that the load (both the oven and hob) will not exceed the power capacity of the circuit.
The benefits of a dual fuel cooker are the responsive heat of a gas cooktop with the precision of an electric oven. This is why they're highly sought-after by cooks and chefs alike. Dual cookers that use fuel are great to experiment with different cooking techniques, like searing or charring.
When buying a new cooktop, you must be aware of a number of aspects such as size, function, and price. In addition, you will also need to make sure that your home has a suitable gas hook-up for the appliance. If you aren't sure then book a Gas Safe engineer to inspect your property before installation.
Currys' dual fuel range cookers are available in a range of models that will fit all budgets. From budget-friendly models from Indesit and Zanussi and our own Essentials collection. If you're looking for something more sophisticated, we stock a variety of premium JennAir models, which feature many new features.
If you are buying a brand new dual fuel range cooker, it's essential to read the manual of the owner for specific information regarding the gas and electrical requirements. It is essential to ensure that your home has a gas hook-up that is suitable, and you may need to have a plumber install this for you if it is required. It is also possible to require an individual cooker-ring circuit installed by a qualified electrical engineer.