What Lock For Double Glazed Door Experts Want You To Learn
How to Choose a Smart Lock For Double Glazed Door
If you're searching for an intelligent lock for double doors, you need to select one that meets the highest security standards. This includes being SS312 Diamond-approved or at the very least Kitemarked to TS007 3 Star, which will prevent the lock from snapping.
Before choosing a smartlock, ensure that your doors have been pre-drilled with boreholes. You may have to install a hinge bolt or another extra security measure if you don't.
uPVC Door Locks
The euro cylinder lock is usually located in the frame of the door's handle. It is linked to a multi-locking system. Many older or less secure uPVC door models have standard locking mechanisms for cylinders that could be easily'snapped,' making the multi-locking system ineffective and allowing burglars to gain access to your home. A higher-quality uPVC door should be fitted with an anti-snap eurocylinder that is much more secure and impossible to hack.
Multipoint locks are a popular option for uPVC door because they offer more security than a single cylinder. They typically have a longer appearance and lock at several points along the door and frame to prevent burglars from accessing the unlocked side of your door.
If you're looking for multipoint locking systems for your uPVC doors, be sure to choose one that is approved by the highest security standards. The most secure locks are certified to SS312 Diamond or at a minimum Kitemarked to the TS007 3 Star standard. Both of these standards have tests to protect against locking snapping.
Keep your uPVC door locks lubricated using a product such as WD40 will help to increase their longevity and prevent the locking mechanism from becoming stiff or causing the handle to struggle when used. This could be a sign that there is an issue with the springs inside that will need to be replaced or it could be an indication that you're using too much force when locking the door since this can damage the mechanism.
It is advised that if you are looking to replace uPVC locks, you contact an expert locksmith who is specialized in uPVC replacement locks. They can advise you on the best lock for your door, and give you a cost-effective estimate. They can also change handles and repair broken panels if necessary.
A professional uPVC lock replacer will charge you between PS35 to 50. They will provide a complete service that is quick efficient, reliable and will be completed to the highest standard. If they need to rekey locks or put up windows that they have broken into, this is an additional cost.
uPVC Euro Cylinder Locks
The multi-point locking system is located inside the door frame and connected to the cylinder locks (also called door barrels). They are also used in internal glazed door and conservatories. They provide an excellent level of security, but they are vulnerable to attacks like bumping or snapping. This is why it is crucial to lock your uPVC doors before retiring to bed or leaving the house.
Before buying, it's important to determine which cylinder lock is best suited to your requirements. For example, you should take into consideration how often you lock your uPVC door, and if you would like a keyed alike system that allows all of your doors can be opened using the same key.
The euro cylinder is the most common type of cylinder. It can be found on most uPVC doors. They are typically made of brass and come in a range of sizes to fit most doors, with the largest models typically being used for back and front doors on larger properties.
It is crucial to select a euro cylinder that has been tested according to the kitemark standards - SS312 Diamond-approved or TS007 3 star and offers protection against Picking Drilling Bumping and Snapping.
Cylinder locks come in different lengths, and some are offset. This means that they will only be locked from the inside when they've been closed by turning the handle up. It is also important to think about the amount you can afford to spend on a uPVC door lock since the price will differ based on the level of security that you require as well as the features you want for your new cylinder to have.
It is essential to measure your door prior to replacing a cylinder in order to ensure that the new cylinder will be capable of fitting. To do this, first locate the screw that fixes the cylinder usually a large headed screw that is in line with the lower portion of the cylinder and take it off. Then you will need to locate the cylinder on the door and measure from the edge of the lock face to the centre of the screw hole. This is your measurement A. Then, measure from the edge of the door to the centre, excluding furniture and this is your measurement B. Make sure that A and B are equal to one another to make sure you have measured accurately.
Multipoint uPVC Locks
The most secure lock for your uPVC or composite door is a multipoint locking system, they are long strip locks that run the length of the door and feature multiple hooks and bolts that lock into place when the handle is turned. They offer increased security for your home and are available in a variety of styles to suit all door types and tastes. uPVC multipoint locks are the type of lock that you will see on the majority of new uPVC doors and most composite/timber doors.
The multipoint lock resists this attack unlike Euro Cylinder locks that are prone to "lock snapping". The locking points of a multipoint lock are joined by a bar made of steel, which stops the hooks from moving, without being able to remove the key.
The majority of the new uPVC and composite doors have an anti-snap multipoint lock installed as standard, but should you be concerned that yours might not, then you should have it checked by your local locksmith. You can tell the lock by opening the door, and then looking at the metallic strip that runs along the length of the door. The most popular manufacturers are ERA, Avocet Fuhr, or Mila.
You will need to either utilize a lever lever on the lock or turn the key several times to engage the locking points. This is known as winding up the lock. Once all the locking points are engaged, you can open and close the door with the handle and also use the key to deadlock it - this throws out the deadbolt that is located in the middle of the gearbox. It is the most secure locking mechanism.
It's best to purchase your uPVC front door lock from a company that specializes in doors and window products. These locks are essential to ensure the safety of your home and family. The purchase of a cheap replacement multipoint lock can be a false economy in the event that the security quality of your new doors aren't up to the standards required. This could put your family at risk but could also impact your insurance premium too.
uPVC Rim Locks
There are several types of uPVC rim locks. The basic rim lock is an one-touch lock. When you shut the door, it automatically locks. You can also purchase one that you have to manually lock with the key before you leave the home. They are not able to be slipped open and are among the most secure options you can put on your door. These locks are suitable for timber or wooden doors on homes for domestic use, and glass panelled door for commercial buildings. You can even have these locks certified to the latest British standard BS3621 so that your insurance company can give you an additional discount on your premium.
Multi-point locks are utilized on uPVC doors and composite doors. They are extremely secure and provide the highest level of security for your home. These locks are equipped with multiple locking positions to ensure that you can't force the handle to turn if you try. RepairMyWindowsAndDoors are designed to make it hard for burglars to break through the handles so they can't pull the latch from outside.
You can also get these locks with a mortice sashlock to provide extra protection from people breaking in through the window. They are a great option for doors that lead into gardens and outbuildings as they offer extra protection from thieves who are able to climb through the window to gain access.
If you own a uPVC or composite door and are concerned about the possibility of snapping of the cylinder, we can provide you with an anti-snap lock to prevent this from occurring. We have them on our own composite doors and are the only uPVC installers in Belvedere that can offer this.
We can change your locks out of hours since we have a mobile vehicle that can be brought to your home. This is a slightly higher cost than when we're working during the daytime, but it's worth it for the ease and security of having your uPVC doors locks changed out-of-hours.