Top Guidelines Of How to Install Laminate Countertops Yourself - Dumpsters.com

Drill a starter hole inside the template marks. The bit ought to be larger than the blade to your jigsaw. Did you see this? (you can use the same piece you utilized for a rip fence if it is wider than the sink) to the center of your future hole. This will support the cut away so that its weight will not break any laminate when reaching completion of your cut.

Insert the blade into your starter hole and begin cutting. Again, constantly have the blade up to complete speed prior to starting the cut. You will discover that it is a little more difficult to control a straight line with a jig saw but not to worry, the lip of the sink will cover any minor slips over your mark.

Post-formed counter top (the kind with the essential backsplash and drip edge) is fast and simple to set up-- as long as you don't need to suffice. Then it's awkward to deal with, the backsplash needs a separate cut, and the plastic laminate chips easily. Business fabricators utilize big stationary saws with 12"- or 14"- dia.

Few people have that kind of equipment, but you can get precise outcomes with a circular saw and a shop-built jig. The jig mimics the easy guide a great deal of people utilize to cut plywood, but it has a second (shorter) leg that twists around the backsplash. I constructed my jig out of scrap 3/4" plywood and utilized some leftover 1/2"- thick pine for the cleats that guide the saw.

Then install the cleat on the brief leg of the jig and cut that side of the jig too. Since the edge of the jig is now completely lined up with the saw's blade, you place this edge on the countertop right on the line where you wish to make your cut.

Before making the backsplash cut, I set the counter top on sawhorses so it rests on the backsplash. This lets me make an almost horizontal cut rather than attempting to hold the saw vertically. (NOTE: When cutting countertop, utilize a fine-toothed plywood cutting blade to decrease breaking in the plastic laminate.) When you have actually got the backsplash cut, set the countertop on sawhorses and cut the large area.