The One Ghost Immobiliser Install Mistake Every Beginner Makes
Autowatch Ghost Immobiliser Installation
The Ghost is the most advanced aftermarket in the UK. immobiliser for the CAN bus. It's discreet, does not use LED indicators or key fobs and is concealed in the wiring of the vehicle.
The user can also deactivate the system for a short period of time by using Transport Mode when renting their car. This guide will take you through the steps of installing a Ghost immobiliser.
ghost autowatch immobiliser protects your car against key hacking attacks, cloning and relay attacks. The system is directly connected to the ECU of your vehicle and protected by a PIN code you set. It is inaccessible to thieves using diagnostic scanners or other modern methods. It is not able to be disabled by cutting circuits.
The system is simple to use, but professional installation is recommended to ensure a smooth connection with the ECU of your vehicle. A certified installer from Thatcham can assist with the installation and programming of your Ghost system. They can also recommend a tracking system or alarm to complement your vehicle's protection package.
First, the installer must disconnect the battery to prevent accidental airbag deployment or short circuits. After the battery has been disconnected, the installer may start working safely. Hand tools are essential for securing connections with precision and a multimeter can be used to test the electrical properties and safety. Insulation tape and cable ties are also vital for protecting connections and keeping wiring tidy. The Ghost Immobiliser user's manual will give specific instructions that are tailored to your model.
It is important to choose an area for grounding that is free of any paint or debris during installation. The installer must ensure that the immobiliser's CAN H as well as CAN L wires are connected to the appropriate ports on your vehicle's ECU. The wires can be connected or soldered depending on the model. A quality connector is recommended to ensure a long-lasting and reliable connection.
Transport Mode can be activated by the client after the installation is completed. This allows mechanics or valet parking to access the vehicle without having to know the pin code. The customer has to press the icon for service on the dashboard five times in two seconds. The system will confirm this by showing five indicators.
The Autowatch Ghost 2 immobiliser is TASSA approved and is a highly efficient immobiliser. It's an excellent option for anyone who regularly rents their vehicle on platforms such as Turo. Immobilisers can also lower insurance costs since it significantly decreases the risk of theft.
Getting Started
If you're seeking a solution to protect your vehicle from thieves it is best to go with an autowatch ghost immobiliser. The device stops your car from running even when someone copies or steals your key. It's possible because of its advanced technology that stops the engine from starting until the correct PIN code is entered.
The device works by connecting to the vehicle's CAN bus network, allowing it to communicate with the ECU directly. It uses buttons that are already present on the dashboard and steering wheel to create a unique sequence only you know and makes it impossible for someone else to start your vehicle. This is the best way to protect your pride and joy. It will keep its value intact in the event that you decide to sell it.
Installing Ghost's immobiliser is straightforward, but you must follow the instructions to avoid electrical problems and malfunctions in the system. You must first find a 12V power source and a solid grounding on the chassis of your car. Then, you can begin connecting the wires to the immobiliser. Make sure you use top-quality connectors and soldering methods to ensure a secure connection. Make sure to shield the connections with heat shrink tubing, insulation tape or other materials to prevent short circuits in electrical power.
Once the wires are connected, you can reconnect the battery and start the engine to test the immobiliser's function. If everything is functioning properly then you can put it in a safe location under the dash or elsewhere in the vehicle. Make sure to hide it properly to stop thieves from getting into it.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) certified this means it is in compliance with the highest standards of security and is an excellent deterrent to car thieves. It is a superior defense against key cloning, hacking, and relay attacks, and cannot be disabled without knowing the code. It is also simple to use and can be set into the service valet mode to ensure that your automobile isn't activated if you bring it in for service or an MOT.
Wiring
The Ghost Immobiliser, a cutting edge security system, is designed to stop theft of vehicles. It communicates with your vehicle's ECU and connects directly to its CAN bus. The Ghost Immobiliser will not interfere with the factory settings of your car unlike other aftermarket systems that require the removal of circuit elements.
The system is also unnoticeable by thieves using diagnostic scanners. This is due to the fact that it does not transmit and receive radio frequency signals and it utilizes the CAN data to communicate with your ECU. It also doesn't require modifications to your existing key fobs.
Enter the sequence to disarm (either two or one buttons) and then turn on the ignition of your car to use Ghost Immobiliser. The indicator will flash twice to verify that you've entered the correct code. After that, you are able to start your vehicle and drive off safely.
Once installed, Ghost Immobiliser guards your vehicle from hacking or key cloning while preserving its value. If you have to surrender your car to a valet or service provider The Ghost Immobiliser can be temporarily disabled in Transport Mode.
You'll require a continuous power source (12V) and an earthing point to complete the installation of a Ghost immobiliser. Be sure that both are properly insulated and can be touched. It is also recommended to use cable tie to secure and bundle the wires. This will reduce the risk of being tampered with by thieves. Make sure you double-check the location of these points to avoid committing a mistake and mark them with a piece of tape or label. It's recommended to inspect all connections for signs wear and tear. Make sure that all connections are securely in place and properly protected. Finally, don't forget to test the Ghost Immobiliser after the installation is completed. This will ensure that the unit is operating properly and that all connections and insulation are safe. If there are any issues, you must be certain to fix them immediately.
Testing
The Autowatch Ghost Immobiliser is a cutting-edge vehicle security system that is integrated into your car's ECU to stop unauthorised engine start. The innovative technology protects your vehicle against key cloning and hacking along with other common methods used by thieves to steal vehicles. The Ghost also works in tandem with other alarm and tracking systems to offer the best protection for your vehicle. This system's unmatched features and secluded design make it a preferred choice for car lovers and security-conscious drivers too.
It is essential to follow the steps of installation to ensure complete integration of the Ghost Immobiliser. A good starting point is to look over the vehicle's wiring diagram, which will serve as a roadmap for locating and connecting the necessary wires. You'll need to determine the power and grounding sources. Once you've identified these you'll have to mark them in a way that they're easy to identify during the installation process. It's important to use high-quality materials and tools. Hand tools are essential to aid in making precise connections. A multimeter will verify electrical values, and ensure safety. Insulation tape and cable tie will keep all connections neat. A Ghost-specific user's guide is also available.
It is important to test the system prior installing it. Enter the PIN code into the system, and then start the vehicle. This will ensure that the immobiliser functions according to plan, and prevents unauthorised vehicle starts. It is recommended to complete this step regularly as part of your regular inspections of the vehicle to ensure the system is always functioning properly.
After the installation is completed After the installation is completed, you are able to drive your vehicle with confidence. The Ghost will protect your pride and joy from would-be car thieves. It will ensure that no one can escape with your car without having the correct PIN code. The Ghost can be linked to an approved Thatcham tracker that identifies any attempts to steal or tamper with. This allows you to track your vehicle if it is stolen.
The Ghost can be utilized in a variety of vehicles and is compatible with all major brands. If you're looking to secure your vehicle with this cutting-edge device, call Monty's Locksmith today to find out more about our installation and service options. We are a TASSA registered installer, which ensures that we adhere to strict standards for the installation of our products. This assures customers, insurance companies and law enforcement agencies that all installations are performed safely and in a correct manner.