The Most Effective Advice You'll Ever Receive On Replacing A Window Handle
Tips For Replacing a Window Handle
Changing the handle on your window is a simple project that can be completed in the convenience of your own home. Follow these handy tips for an easy operation and a beautiful looking finish.
Start by removing the screw covers to expose the screws within your uPVC window handle. Take a measurement of the spindle to be sure you're getting the right size replacement.
1. Measure the Spindle Length
It's important that you get the spindle size right when replacing windows handles. It could influence the tightness or looseness of the handle and whether the handle will lock correctly into the window frame. The spindle is a steel shaft that connects the handle to the lock on the window frame. The spindle is either a standard 8mm cross-section in the industry or the earlier 9mm versions. The current industry standard is 8mm, but this wasn't always the case. When buying a new handle it's essential to check the measurements.
The easiest method of measuring the spindle length is to remove the handle that is currently in place, this can be done by turning it to the open position and then removing the two screws (which might be hidden behind plastic caps that will need to be removed) that retain the handle. Once the handle has been removed, measure the distance from the base to the end. This will provide you with the measurements required to buy a new one.
There are plenty of options when it comes to choosing a new window handle from sleek chrome that can fit in with a modern home, to traditional brass that looks stunning in restored Georgian rooms or even the more traditional Tudor cottages with curled monkey tail locks! The possibilities are endless, but the most important thing is to select a style that is suitable for your home.
Espag handles are commonly used to uPVC window frames and are always the exact same size with a 43mm center. Cockspur handles are available in a variety of sizes, starting at 58mm to 62mm. Window handles made of Cadenza are different in size as they have an angled blade that functions a multi-point locking mechanism inside the window.
When choosing a window handle take into consideration the hand you use to open your door. Inline Espag handles can be used with right or left-handed windows. Cranked window handles can only be used for windows that open in a single direction.
2. Take the handle off
If the handle is damaged or simply worn out the handle of a window that is shattered can be very frustrating. But the good news is that replacing a uPVC window handle is a simple task you can complete yourself. You'll need only the most basic hand tools and time to complete this process.
First, you must open the window and make sure that it is in an unlocked position. Then, remove the screw caps holding the handle in position. Once these caps are removed, you can begin working on removing the handle itself.
The handle is attached to a spindle inside the window frame. It is fixed with either a screw or pin, depending on the type of handle. The most commonly used handles are the inline Espagnolette and the cockspur handles. Both these types of handles are utilized on casement windows, as well as aluminum windows. They can be locked using keys to stop unauthorised opening of the window from the outside, or you can lock them by turning the handle clockwise.
To take door handle repairs repairmywindowsanddoors off, you will need a flat-bladed screwdriver. After this is released, the handle will fall off the spindle. Once the old handle has been removed, you'll have to measure the spindle length and make sure that the new handle will fit.
Once you have decided on the proper size of the handle, screw it into place. You must ensure that the new handle is securely attached and that it turns in the correct way (clockwise for open, or counterclockwise for closed). It is also important to make sure that it has not been fitted upside down.
Then, you must replace the screw cap caps. After you've done that, you can test the handle to confirm that it functions properly. Also, you should test the locking mechanism by moving the handle to the locked position and then back to the locked position.
3. Take the Screws off
A uPVC handle is an essential part of any house and is the first thing that shows signs of wear or damage. This could be due natural elements, regular use or even intentional damage by criminals who want to gain access to your home. A simple repair can fix the issue and stop it from happening again.
UPVC handles can be difficult to open when the locking mechanism isn't functioning properly. Often, the problem is solved by replacing the multipoint lock, rather than the entire handle. It's worthwhile to check this out as it can save you money.
Once you've removed the old handle, you'll have to remove the screws that held it in place. They are usually located on the inside face of the base of the handle. You may need to use a screwdriver for this and it's essential to not over tighten, as this could cause the handle to loosen.
Then, you'll have to find the pins or screws that keep the handle in place. They will likely be located on the inside of the base of the handle. you'll need an screwdriver or a pair of pliers to remove them. After they've been removed, you'll have to replace the caps on the screws should you choose to do so, and then test the new handle to ensure it's working correctly.
Install the handle by adjusting the spindle to the window's cutout mechanism. Then screw it into. Make sure that the handle is in the open position and that the screws are tightly fixed before replacing the screws' covers if you wished to do so. Once this is complete you're all done and you are able to enjoy your new window handle. Hopefully this will help you avoid having to pay for costly window and door replacement services in the future. Contact us if need more information on this or any aspect of your uPVC window.
4. Install the new handle
Whether you're replacing a broken handle or simply updating it the procedure is easy and can be accomplished in just a few steps. The first step is to determine the kind of handle, determine its spindle and identify the tools you'll need to complete the job. Safety is always the top priority when working with tools and windows. It's also important to take your time and follow the steps with care to ensure you have a working handle that is safe to use.
The first step is to identify the screws that hold your current window handle in place. Then, remove them, while keeping a safe hold on the handle itself to prevent it from falling and result in injury. Once the screws are removed and repositioned, they can be put in a secure location to be replaced later.
After you have removed the handle, you can now begin to put in your new one. It is important that the handle fits perfectly to ensure it is functional and secures the window in its place. Then you need to slide the square metal bar attached to the handle into the hole for the window mechanism.
The last step is to replace the screws caps and test the handle to ensure it works. If you aren't satisfied with the results, or the window doesn't open or close correctly, call our experts for assistance.
The majority of homes in the UK have uPVC windows and as so, a large number of them will have to be replaced at some point due to wear or breakage. The process is relatively straightforward and can be done by anyone with a bit of knowledge of DIY. The most important aspect in the success of this procedure is making sure you're using a handle which matches your existing window in terms of dimensions and style. If you're not sure what type of handle you require, please get in touch with our team who will be able to guide you through the options available.