The History Of Sash Lock Door Handles
Sash Lock Door Handles
If you're looking to increase the security of your home without compromising aesthetics, go for doors with sash locks. They are used in conjunction with mortice latches or sash lock, and can be paired with a night latch to add security for doors that are internal.
The handles consist of a handle/lever on the backplate. They are usually used with a three or five lever mortice lock. They can also be paired with a tubular latch.
Lever Lock Handles
There are a variety of lever door handles available to complement any decor. The rustic lever locks are a favorite in both farmhouse-style and modern homes. Classic lever handles are round or spherical and easy to grasp. They are simple and affordable, and can be used in any decor. Choose satin nickel or polished chrome handles for an elegant look. These finishes are sturdy and easy to clean. Antique bronze and polished Brass are also options. A lot of handles feature a decorative design, such as small amber worm eyes or long-horned crystals. Some levers have a pin, star or any other design molded into the bottom.
To replace the lever lock door handles, you need to have the correct screwdriver or tool for disassembling them. Depending on the design and model, you may need to employ an awl, or nail to remove the lever handle. Some lever handles come with tiny holes or a notch at the bottom of the handle that can be used to pull them open.
Follow the manufacturer's instructions for removing your existing handles when you have the right tool. You'll need to verify the spindle size of the new lever handle. Doors from the past may have been morticed for previous latches and locks that require a particular spindle. Most lever handle manufacturers employ the standard door handle spindle.
If you want to replace a sash-lock door handle, take off the handle that was previously used and disconnect the tubular latch bolt from the strike plate on the door frame. The latch bolt will need to be put through a hole in the door's frame and connected to the strike plate.
It is important to remember that when installing new lever handles all handles that are compliant with the ADA (Americans with Disabilities Act) are designed to operate with a hand. The user must not be required to hold their hands tightly or twist their wrist. To be in compliance with ADA standards of compliance, the lever door handle cannot be operated using fingers and thumbs, or even the entire hand.
Sash Lock Handles
The primary purpose of sash lock door handles is to pull the sashes moving together to form a seal. This helps to maintain the interior temperature of the house and also prevents drafts. These are ideal for doors that do not require for a keyed lock system.
Mortice sashlocks can be described as sash locks that combine deadbolt and latch in one case. They are installed to the door's material. They are used in conjunction with a set of door handles and are available in a range of choices.
The lever handles for locking is operated by a lever with an opening cut into the backplate below. This permits a key to be to be inserted into the mortice sash to operate it. This lock is most commonly used on doors that do not lock, such as those in dining and living rooms. However it can also be used with a tubular lock to create an extra secure door.
They are designed to hold the sash together at multiple points, and feature a hook that fits inside the keeper. They come in various styles and designs to fit into various types of windows, such as sliding or hinged casement windows. Some are made of cast aluminium, while others are made from brass and even wrought iron. They're available in a variety of finishes to match other elements of your door furniture such as escutcheon plates that secure the keyhole.
3 lever sash locks are suitable for doors that are internal but not external ones, because they lack the level of security that insurance companies require. They also are less vulnerable to forced entry than their five lever counterparts, which makes them more susceptible to being harmed.
A door sash with five levers is the best choice for exterior doors. It provides higher levels of resistance to forced entry, and is more difficult to bypass or pick. The locks are upgraded in design that has been tested and certified to comply with stringent building, disability, and fire regulations.
To replace a handle on a sash-lock remove the old fastener from both ends by taking out the screws. Be sure to have a screwdriver on hand and carefully separate the pieces to avoid damaging them. Mark the screw holes using pencil so that you can align the new fastener properly when you are ready to install it. Remove any dust or paint flecks, then screw in the new fastener. It is important to test the handle to make sure it operates correctly and creates a tight seal.
Tubular Latch Handles
The tubular latch is an internal latch that is operated by turning the handle. It is designed to close the door, but it does not lock the door like a mortice lock would. They are typically used on doors that are internal, and where locking is not necessary. They can be fitted with lever or knob handles.
There are many sizes of tubular latch available. These range from economy through to high-end architectural quality. The size of the door depends on the purpose for which it is used and whether it is equipped with locks. If you require an emergency release mechanism that can be triggered by thumbs an emergency situation, then it is necessary to have a lockable latch.
The backset of your door will determine the latch you select. You will need to choose the latch with a backset measurement that matches the distance between the edge and the centre of the door's hole to accommodate the handle rose/knob. This will ensure your handle/door knobs will operate the latch smoothly.
If replacing window sashes are fitting a spring or unsprung door knob or lever, then it is important to choose a sturdy tubular latch with a double sprung follower and tongue. This will ensure a smooth and consistent latch action and prevent it becoming sluggish or ineffective after prolonged use.
The next step is to put the latch on the door. The first step is to ensure that the latch is aligned to the top of the door frame/casing. Note the location of the plate and drill holes. Utilizing a countersink drill bit can help create the right recess to rest comfortably in.
Once the latch is in place after which you can attach it onto the door. Before installing your locks or handles it is crucial to ensure that the latch is functioning correctly. To check, open and close the door a few times. If it's not working correctly Try lubricating the door using WD40. Then, try it again. If you're still having problems, it might be necessary to call a professional installer or locksmith.
Keyhole Handles
Keyhole handles are fitted with the tubular latch installed in the door to allow it to be closed and opened it. The handle engages the latch when it is pushed down and then releases it when pulled up. These handles are usually used on doors in the interior like those found in living rooms and dining rooms. However, they can be fitted to the front door, if they are paired with a nightlatch.
Door knobs are a contemporary type of handle that combines spring-loaded levers/handles on a square or round fixing rose with an accompanying thumb turn or escutcheon. They are available in a variety of designs and finishes that will fit the doors in your home. They can be used with Euro cylinders or multipoint locking systems to provide additional security. This is accomplished by locking the door at several points along the length of the door. Door handles that are compatible are required with the correct size of the lock's center to fit the barrel.
Keyhole escutcheons cover the existing keyhole in the door to conceal it and give the handle a stylish look. They are available in an open-top or screw-on style and are available in a variety of styles to match your door handle. A recessed escutcheon can be fitted to the door's edge to further conceal the keyhole and give it an updated look.
The majority of the handles described above are designed to work with either a mortice or the sash lock mechanism. However some are compatible with Euro Cylinder locks too. These locks are installed on uPVC doors and require compatible door handles that have a Euro cylinder cutout and suitable screw holes inside the backplate to accommodate the euro cylinder. These handles will also require an Euro cylinder escutcheon or a standard escutcheon depending on the purpose.
If you decide to use a mortice lock, sash lock or tubular latch for your door, it's essential to be aware of the different characteristics of each and the requirements they must meet for compatibility with the other components of your uPVC door system. You will need to consider the door thickness and the door hinges, the frame reinforcements, the size of the backplate to the handle, the lock's central dimensions and the screw centres on the cylinder.