The Comprehensive Guide To Know About The Wafer Front End, AMAT Robot & 300mm FOUP System

After doing significant research, we have finally rounded up with the detailed study of the wafer front end, AMAT Robot & 300mm FOUP that you can check-out to get a better understanding of these terms.

What is the Wafer Front End?

The wafer front end is the single integrated circuit that is used to place on each wafer by step-by-step methodology. The other name of identical IC is the die in which the new layer of processes is added on the wafer to make the modification of the existing hardware design. In other words, it is the term that not only handles the wafers but also takes care of their robot wrist installation. Other than the IC fabrication, the front-end-of-line or FEOL combines several individual devices in the semiconductor, likewise, capacitors, transistors, and resistors. It includes various processing steps, which is essential to make the fully protective complementary metal oxide semiconductor elements.

Here is the simple fabrication strategy of the wafer front-end system:

● First of all, it is important to choose either a single wafer robot or multi-link SCARA wafer robot, once the type is successfully selected, the next step is to smoothen the surface with the combination of both mechanical and chemical forces. It is also referred to as chemical-mechanical planarization that plays the leading role while cleaning of the wafer.

● In the next step, the box-isolation technique is used by the wafer front-end-of-line to protect the device components from the electric current leakage.

● To complete the first portion of IC fabrication, the use of Gate module formation and the drain module formation is crucial to maintain the flow of current.

What is AMAT Robot?

The term ‘AMAT’ is called the applied materials, and the AMAT (applied materials) robot is the automated software, equipment, service launched by the international companies to use the product in a variety of applications such as electronic-based integrated chips, televisions, smartphones, solar products, etc.

Is 300mm FOUP Also A Wafer Handling Robot?

Yes, 300mm FOUP is the load port wafer handling robot that is mainly the plastic enclosure designed to handle the silicon wafers. FOUP is an acronym for front -opening universal pod or front-opening unified pod that helps in the allocation of wafers and changes their position from one place to another whenever it would be the matter of increasing the processing performance of machines.

Other than that, 300mm FOUP is equipped as the wafer processing tool and is available in the distinct color combinations and sizes. Still, it entirely depends upon the brand name and location. It helps take the appropriate nitrogen ecosystem, which is specifically required to enhance the productivity of the devices. It comes with the removable cassette that supports a lot while setting the position of the wafers. Maintaining an accurate position is the fundamental concept of 300mm FOUP. If it is not fulfilled during the operation, it will never drive as much output, which your system requires to boost the performance.

Additionally, the Front Opening Unified Pod (FOUP) wafer handler systems are beneficial for the prevention of excessive humidity. It may use specific strategies to eliminate the dust and dirt from the machine and also can be filtered by the gaseous elements.

The main pros of using 300mm FOUP load port wafer handling robots are mentioned below:

● When using the 300mm size FOUPs, there is no additional requirement of plate and door alignment.

● It comes with the full CE certification, ROHS & SEMI compliance to provide exceptional performance in the customer machines.

● From RFID, OCR scanning, programmable lights, AMHS options, buttons to class-1 cleanliness is possible with this automatic device.

When it comes to buying the wafer handling AMAT ROBOT, Wafer Front End SCARA robots, and 300mm FOUP Load Ports online, most consumers get confused due to the broad list which is sorted on the digital platform. That’s why we want to recommend a one-stop name that is Kensington Laboratories that gives prime priority to the customer needs and always try to provide them with the best range of products from ADOs, end-effectors, wafer fabrication robots at the most affordable price. Whether you are concerned about the stage repairing of the existing systems, the engineers of this company will never give you a feeling of dissatisfaction. So, before switching to any other brand, you can consult with the firm to design your custom robotics to achieve the automatic results.