Steps To Flash Firehound🔥 Rom on A10 firmware
PMS22
To flash FireHound on A10 firmware, follow the steps below :-
1) Reboot to recovery.
2) Wipe Data, System and Dalvik Cache.
3) Flash FireHound and SHRP Installer.
4) Reboot to Recovery.
5) Wipe cache and reboot to System. (Important)
6) Reboot back to Recovery.
7) Flash gapps, magisk. (Optional)
8) Wipe cache.
9) Reboot to System.
Note :- If WiFi or Bluetooth doesn't work for you after booting, boot into fastboot and flash the provided DTBO image.
Steps for flashing DTBO image :-
1) Boot into fastboot mode and paste the following commands.
2) fastboot flash dtbo_a dtbo.img
3) fastboot flash dtbo_b dtbo.img
4) fastboot reboot