Some Ideas on What's the best way to cut Formica? - EveryThingWhat.com You Need To Know

By Jeff Sawyer on January 28, 2010 Plastic laminate counter tops are affordable, resilient, simple to clean, been available in a large range of designs, and best of all are fairly easy to install yourself. Here are some pointers on how to cut a laminate counter to fit your need. Tools You will want to collect the following items: Jigsaw (saber saw) with a "down cut" blade minimum of 10 teeth/inch Circular saw with a thin kerf (area left by cut of blade) carbide blade with 60 teeth Sanding block/Belt sander with 220 grit sandpaper Portable drill As always, eye security Cutting to Fit You can purchase laminate countertops in stock sizes that can be found in 2 foot periods between 4 and 12 feet.

However fear not, cutting the counter to fit is not an extremely hard task. As a matter of fact, frequently the seller will have end trim pieces of matching laminate to glue on after you make a cut. Here are More In-Depth to get a clean cut off of your counter.

Adhere a strip of masking tape on the counter where your cut will be to protect the laminate from cracking. Lay a second piece of masking tape so the shoe to your saw will rest on the 2 strips of tape and safeguard the counter from being scratched. With a carpenter's square mark your cutting line onto the very first piece of masking tape.

You will wish to clamp a 12 to utilize as a rip fence. Utilize this measurement so that the saw rests against the fence and the blade is lined up with your mark. add 1/16th of an inch to your measurement so that your cut is really a little wide of the mark.

Set the depth of your blade to 1/8th inch much deeper than the thickest part of the counter. Constantly get the blade approximately complete speed before starting your cut. Another tip is to do a practice cut into the waste side of the counter so you can get a feel for it.