Sika Latex

Sika Latex

Tile & Stone Installation: Adhesives & Grouts

Tile & Stone Installation: Surface Preparation

Acrylic latex bonding agent/admixture for portland-cement mortar/concrete

Concrete/Mortar/Grout/etc. containing SikaLatex® R exhibits improved adhesion to pre-pared substrates Increased adhesive strength of mortar/concrete when used as a bonding grout Increased resistance to freeze/thaw durability Does not produce a vapor barrier
Usage Admixture (replacing water) used in cement based products to improve adhesion, achieve a denser surface, and improve overall performance As a bonding grout (prime coat) when mixed with sand and portland cement

Advantages Concrete/Mortar/Grout/etc. containing SikaLatex® R exhibits improved adhesion to pre-pared substrates Increased adhesive strength of mortar/concrete when used as a bonding grout Increased resistance to freeze/thaw durability Does not produce a vapor barrier
Product Data Sheet (PDS)
PDF - 249 KB
(en)

Safety Data Sheet (SDS)
PDF - 120 KB
(en)

SikaLatex® R is an acrylic-polymer latex. It is not re-emulsifiable. It is a general purpose admixture which will produce polymer-modified concrete and mortar. Sika Latex R is also a bonding grout when mixed with sand and portland cement.

55 gal. (208 L) drum (special order)
12 months in original, unopened containers
Store dry at 40 to 95 °F (4 to 35 °C). Condition material to 60 to 75 °F (15 to 167 °C) before using. Protect from freezing. If frozen, discard
SikaLatex® R added to produce a creamy consistency.
Plastic Concrete to Hardened Concrete
28 days > 500 psi (3.4 MPa) Bond Strength
As mixing solution : for Concrete/Mortar/Grout/etc. use neat, replacing the amount of water typically recommended
As a bonding grout : estimated coverage based on amount of material (sand/cement) mixed
As admixture/mixing solution: With mixer running, add materials in the following order: SikaLatex® R solution and then the cement based product. Replace the amount of water recommended by the product. Do not dilute with water. As a bonding grout: With the mixer running, add in the following order. SikaLatex® R solution, aggregate, cement. The ratio is 1 part cement, 2 parts sand, and a sufficient amount of undiluted SikaLatex® R to produce a creamy paint consistency. Maximum 4 gal./sack of cement (15L/sack of cement). As a primer for acrylic coatings: No dilution is required. Use as is.
201 Polito Avenue
Lyndhurst New Jersey 07071
United States of America
phone +1 (201) 933-8800
fax +1 (201) 804 1076

Water resistant bonding agent and mortar admixture

The main advantages of SikaLatex® are:
Increased adhesion Reduced shrinkage and cracking Increased abrasion resistance Reduced permeability Improved workability User friendly Suitable on most common construction substrates
Usage
SikaLatex® is used as bonding agent and site-mix mortar admixture for the following applications:
Grouts and screeds Patch repair mortars Mansonry mortars Renders Tile adhesives

Advantages
The main advantages of SikaLatex® are:
Increased adhesion Reduced shrinkage and cracking Increased abrasion resistance Reduced permeability Improved workability User friendly Suitable on most common construction substrates
Product Data Sheet (PDS)
PDF - 585 KB
(en)

SikaLatex® is a synthetic rubber emulsion that is used as admixture for cementitious bonding bridges and high quality site-mix mortars.
Suitable for use in hot and tropical climatic conditions.

SikaLatex® is certified according "Low Emitting Materials as per Al Sa'fat - Dubai Green Building Evaluation System" by Dubai Central Laboratory (DCL) certificate No. CL17020432
Store properly in undamaged original sealed packaging, in dry cool conditions at temperatures between 5 °C and 30 °C. Protect from direct sunlight, contamination and moisture.
1. Bonding Bridge Cement : Quartz Sand : Liquid (1 part SikaLatex® + 1 part Water) = 1 : 1 : 1 (by volume) or, Cement : Quartz Sand : Liquid (1 part SikaLatex® + 1 part Water) = 1.5 : 2 : 1 (by weight)
Apply the slurry by brush onto the pre-wetted substrate in 1-2 mm thickness and apply the subsequent mortar renders immediately (wet on wet application).
Portland cement Quartz Sand SikaLatex® Water
Up to 25 kg of Sikadur Aggregates should be added where the thickness per layer exceeds 12 mm
Up to 25 kg of Sikadur Aggregates should be added where the thickness per layer exceeds 12 mm
Adhesive mortar for bonding tiles, slip bricks, coping stones, kerbs, etc
Portland cement Quartz Sand SikaLatex® Water
The above mixes are for guidance only and based on the use of sharp, well graded aggregates and dry sand. Trial mixes must be performed to establish the exact dosage rate required. For optimum results, always ensure that the correct SikaLatex® : Water ratio is used. Depending on the application and performance required, Sika Latex® may be added to the clean mixing water within the range of 1:1 to 1:4. For all applications apart from sprayed on renders, a bonding bridge should be brushed into the prepared surface.
Aggregates should be sharp, well and thorougly washed. Sand particle sizes should correspond to the thickness of the applied mortar and to required surface finish.
Mix SikaLatex® with the correct amount of water to produce a gauging solution.
Pour part of the gauging solution into a suitable mixing container. While stirring slowly, add the cement-sand mix to the gauging solution and mix thoroughly until a smooth, uniform and lump-free mix is achieved. Within the mixing time add additional gauging solution to adjust to the desired consistency.
Dubai Industrial City, Saih Shuaib 4 Plot No. 61, DM No. 533-279
P.O.Box 126212 Dubai, United Arab Emirates
For thin sections use Sikadur Aggregates, size dependant on layer thickness. Keep water content at a minimum.

SBR based mortar admixture and bonding agent

Adhesion to most substrates (concrete, stone, brick, ferrous metals, glass, ceramic tiles) Improves elasticity, flexibility and tensile strength of cement and reduces cracking in mortar and concrete Economical, easy to use and non-toxic Inhibits cracking, improves surface hardening, limits wear and dust production Makes the mortar waterproof and reduces susceptibility to acids and greases, salt petre action, etc Mortar with SikaLatex® shows extremely good bonding to bases like concrete, stone, brick etc Reduces viscosity of cement injection grout and improves bond of cured injected materials with substrates SikaLatex® can be diluted with water (1 : 4 – 6) depending on the type of application Screed required with Sikacim® / Sika® Plastocrete Super to protect waterproofing layer Standard coating system can be further reinforced by placing glass fibre reinforcement Sika® Fabric-50 in between first and the second coat
Usage
SikaLatex® is a high quality emulsion that substantially increases the quality of cement slurry / cement mortar / concrete / cementitious grout.

The scope of application are as follows:

As a bonding agent for uses in repair and plastering Bonds rendering and coating layers Bonding between successive concrete casts by incorporating SikaLatex® into bonding mortar For making polymer mortar for repairs For waterproofing of roof slabs, sunken slabs, basements, retaining walls, water tanks, sunshades etc. in combination with cement Ensures high wear resistance against erosion Long life and watertight masonry jointing Used as modifier in bonding mortar for tiles & panelling Multipurpose admixture for cementitious injection grouting into cracks or porous concrete works Treatment for leaching and saltpetre action

Advantages Adhesion to most substrates (concrete, stone, brick, ferrous metals, glass, ceramic tiles) Improves elasticity, flexibility and tensile strength of cement and reduces cracking in mortar and concrete Economical, easy to use and non-toxic Inhibits cracking, improves surface hardening, limits wear and dust production Makes the mortar waterproof and reduces susceptibility to acids and greases, salt petre action, etc Mortar with SikaLatex® shows extremely good bonding to bases like concrete, stone, brick etc Reduces viscosity of cement injection grout and improves bond of cured injected materials with substrates SikaLatex® can be diluted with water (1 : 4 – 6) depending on the type of application Screed required with Sikacim® / Sika® Plastocrete Super to protect waterproofing layer Standard coating system can be further reinforced by placing glass fibre reinforcement Sika® Fabric-50 in between first and the second coat
Product Data Sheet (PDS)
PDF - 289 KB
(en)

SikaLatex® is a synthetic rubber emulsion which when added to cement slurry / cement mortar / concrete / cementitious grout provides good adhesion and water resistance. It comes in the form of a milky liquid. It is fully soluble in water and is to be added directly to the gauging water of slurry / mortar / concrete / grout.

Store properly in undamaged and unopened original sealed packaging, in dry conditions and protected from direct sunlight. Protect from frost.
SikaLatex® : Water : Cement = 1 : 4 : 8
SikaLatex® : Water : Cement : Sand = 1 : 4 : 10 : 40
The above stated consumption depends on substrate condition, porosity, level, application skills and mixing ratios.
SikaLatex® may also be used for applications such as waterproofing coating, admixture to cement grouting, masonry jointing, polymer concrete or screed, crack filling, etc. Please consult Sika® Technical Service team for consumption and mixing ratio information.
SikaLatex® is to be added to cement / cement mortar / concrete / grout depending on the type of application as per the table above.
Mixing of diluted SikaLatex® to cement mortar should preferably be done manually by volume as per the table. When a concrete-mixer is used, pour the mortar as soon as its consistency is cohesive. Do not run the mixer too long.
When a waterproofing slurry or bonding coat is to be prepared, cement is to be added in the polymer for getting consistent mixture.
Clean all tools and application equipment with water immediately after use. Hardened / cured material can only be removed mechanically.
Plot No D 101/2,MIDC Industrial Area
Shiravane, Nerul, Navi Mumbai
Maharashtra 400706
Tel : +91 22 62704038
Fax : +91 22 62704039

Shortcuts to other sites to search off DuckDuckGo Learn More
Bonding Agent and Water Proofing Admixture SikaLatex ® is a synthetic rubber emulsion that is used as admixture for cementitious bonding bridges and high quality site-mix mortars. The main advantages of SikaLatex ® are: Extremely good adhesion Reduced shrinkage Greater elasticity Product Data Sheet Show all documents Overview Product Details
Water resistant bonding agent and mortar admixture SikaLatex ® is an acrylic-polymer latex that is used as admixture for cementitious bonding bridges and high quality site-mix mortars. Increased adhesion Reduced shrinkage and cracking Increased abrasion resistance Product Data Sheet Safety Data Sheet Show all documents Overview Product Details
SikaLatex ® R is an acrylic-polymer latex . It is not re-emulsifiable. It is a general purpose admixture which will produce polymer-modified concrete and mortar. Sika Latex R is also a bonding grout when mixed with sand and portland cement. Concrete/Mortar/Grout/etc. containing SikaLatex ® R exhibits improved adhesion to pre-pared substrates
SikaLatex ® is a synthetic rubber emulsion that is used as admixture for cementitious bonding bridges and high quality site-mix mortars. Suitable for use in hot and tropical climatic conditions. The main advantages of SikaLatex ® are: Increased adhesion Reduced shrinkage and cracking Increased abrasion resistance Product Data Sheet Show all documents
SikaLatex ® is a synthetic rubber emulsion which when added to cement slurry / cement mortar / concrete / cementitious grout provides good adhesion and water resistance. It comes in the form of a milky liquid. It is fully soluble in water and is to be added directly to the gauging water of slurry / mortar / concrete / grout.
usa. sika .com or by calling SIKA's Technical Service Department at 1-800-933-7452. Nothing contained in any SIKA literature or materials relieves the user of the obligation to read and follow the warnings and instructions for each SIKA product as set forth in the current product label, Product Data Sheet and Safety
Sika Latex is a simply added to the mixing water to provide the following beneficial properties: Extremely good adhesion. Reduced shrinkage. Greater elasticity. Excellent water resistance. Packaging 5 Kg and 20 Kg pails 200 Kg drums Bulk Tanks packing available upon request. Colour White Documents Sika Latex
SikaLatex ® Water resistant bonding agent and mortar admixture SikaLatex ® is a synthetic rubber emulsion that is used as admixture for cementitious bonding bridges and high quality mortars. The benefits of SikaLatex ® include, but are not limited to the following: Increases adhesion Reduces shrinkage and cracking Increases abrasion resistance
Acrylic latex bonding agent/admixture for portland-cement mortar/concrete PRODUCT DESCRIPTION SikaLatex ® R is an acrylic-polymer latex . It is not re-emulsifiable. It is a general purpose admixture which will produce polymer-modified concrete and mortar. Sika Latex R is also a bonding grout when mixed with sand and portland cement. USES
SikaLatex ® is used as bonding agent and site-mix mor- tar admixture for the following applications: Thin layer patching mortars Floor screeds Renders Concrete repair mortars Abrasion resistant linings Tile fixing mortars Masonry mortars Composition pH-Value CHARACTERISTICS / ADVANTAGES
Help your friends and family join the Duck Side!
Stay protected and informed with our privacy newsletters.
We don't save your search history or follow you around the web.
Over $3,650,000 in DuckDuckGo privacy donations.
Learn how we're dedicated to keeping you safe online.

Bald Kids Young Pussy Pics
Seks Mama Milf Brazil S
Horse And Girl Porno

Sika Latex

Report Page