RouterOS 7.14 [Stable]

What's new in 7.14 (2024-Feb-29 09:10):

!) rose-storage - moved SMB service to the RouterOS bundle;

!) smb - removed legacy SMB service (replaced with newer and faster ROSE SMB service, compatible with SMB 2.1, SMB 3.0 and SMB 3.1.1);

*) 6to4 - make "ipsec-secret" sensitive parameter;

*) api - improved REST API stability when processing invalid requests;

*) api - properly return SNMP OIDs when requested;

*) arm - improved system stability when using microSD on RB1100Dx4;

*) arp - added ARP status;

*) bgp - allow to leak routes between local VRFs;

*) bridge - added MLAG support for MSTP bridges;

*) bridge - avoid per-VLAN host flushing on HW offloaded bridge;

*) bridge - fixed auto "path-cost" for bonding interfaces (introduced in v7.13);

*) bridge - fixed MLAG connection after peer-link flap (introduced in v7.13);

*) bridge - fixed packet forwarding after changing HW offloaded bridge interface settings in certain cases (introduced in v7.13);

*) bridge - improved bridge VLAN configuration validation;

*) bridge - improved configuration speed on large VLAN setups;

*) bridge - improved protocol-mode MSTP functionality;

*) bridge - improved protocol-mode STP and RSTP functionality;

*) bridge - make "point-to-point=yes" default value for non-wireless bridge ports;

*) bridge - removed "mst-config-digest" from MSTI menu;

*) bridge - try to set wireless bridge ports as edge ports automatically;

*) bth - added simple "Back To Home Users" manager under IP/Cloud menu;

*) calea - improved system stability when adding bridge rule without "calea" package installed;

*) certificate - improved certificate validation performance;

*) console - added ":tolf" and ":tocrlf" commands for converting line break to/from LF or CRLF;

*) console - added "show-at-cli-login" option to display a note before telnet login;

*) console - added missing "where" clause for "/ipv6/firewall/filter" table print command;

*) console - do not accept negative or too large values for ":delay" command;

*) console - do not allow to use out-of-range values for time type fields;

*) console - fix configuration export when user does not have a "sniff" policy;

*) console - fixed delayed output from ":grep" command in certain cases;

*) console - fixed incorrect behavior of ":onerror" command in certain cases;

*) console - hint on reset command help that ".rsc file" is required for "run-after-reset" parameter;

*) console - improved editor functionality in full screen mode;

*) console - improved stability when using autocomplete with "export";

*) console - increased maximum file content length that can be managed through command line to 60 KB;

*) console - updated copyright notice;

*) container - improved VETH interface management responsiveness and reliability;

*) container - restrict "/container/shell" menu for users without "write" permissions;

*) defconf - added log about configuration reset due to pressed reset button;

*) defconf - fixed Audience scanning-for-wps-ap timeout;

*) defconf - fixed configuration script on KNOT devices if "ppp-out" interface is removed;

*) defconf - fixed firewall rule for IPv6 UDP traceroute;

*) defconf - fixed wifi configuration if interface MAC address is changed;

*) defconf - improved wifi interface detection after upgrade;

*) defconf - increased LTE interface wait time;

*) defconf - updated health settings on configuration revert;

*) defconf - use "fq_codel" queue as default interface queue for wired ports on LTE devices;

*) dhcpv6-client - install dynamic IPv6 blackhole routes in corresponding routing-table;

*) dhcpv6-client - updated error logging when multiple prefixes received on renew;

*) disk - added exFAT and NTFS mount/read/write support;

*) disk - added global disk "settings" menu;

*) disk - fixed changing settings on some GPT formatted disks;

*) disk - properly unmount disk when it is disconnected;

*) dns - do not add new entries to cache if "cache-size" is reached;

*) dns - fixed domain name lookup resolving for internal services;

*) ethernet - fixed issue with default interface names for CRS310-8G+2S+ in rare cases;

*) ethernet - improved cable-test reliability for hAP ax3 PoE out port;

*) ethernet - resolved minor memory leak while processing packets;

*) fetch - added "head" option for "http-method";

*) fetch - added "patch" option for "http-method";

*) fetch - allow specifying link-local address in FTP mode;

*) fetch - allow to use certificate and check-certificate parameters only in HTTPS mode;

*) fetch - do not require "content-length" for HTTP (introduced in v7.13);

*) fetch - fixed DNS resolving when domain has only AAAA entries (introduced in v7.13);

*) fetch - fixed fetch execution when unexpected data is received in HTTP payload;

*) fetch - fixed fetch when using "src-path" with HTTP/HTTPS modes (introduced in v7.13);

*) fetch - fixed fetch when using "src-path" with SFTP mode (introduced in v7.13);

*) fetch - fixed incorrect "src-path" error message when "upload=yes";

*) fetch - fixed IPv4 address logging (introduced in v7.13);

*) fetch - improved fetch stability in SFTP mode;

*) fetch - improved file download stability with HTTP/HTTPS modes;

*) fetch - less verbose logging;

*) fetch - print all "Set-Cookies" headers in response;

*) fetch - treat any 2xx HTTP return code as success (introduced in v7.13);

*) filesystem - improved filesystem integrity for several RB3011 units with automatic firmware upgrade;

*) firewall - added "creation-time" parameter for IPv6 address list entries;

*) firewall - fixed underlying CAPsMAN tunnel reusing packet marks of encapsulated packets;

*) firewall - fixed underlying VXLAN/EoIP tunnel reusing packet marks of encapsulated packets;

*) firewall - increased default "udp-timeout" value from 10s to 30s;

*) health - added limited manual control over fans for CCR1016r2, CCR1036r2 devices;

*) health - changed default "fan-min-speed-percent" from 0% to 12%;

*) health - improved fan control on CRS3xx and CCR1016-12S-1S+r2;

*) health - show voltage when powering KNOT R through Micro-USB;

*) health - updated health properties for CCR1016r2, CCR1036r2 devices;

*) iot - added bluetooth whitelist wildcard asterisk support;

*) iot - added LoRa CUPs protocol support;

*) iot - fixed modbus partial frame reception issue;

*) iot - improved LoRa LNS;

*) iot - improved modbus Tx/Rx switching behaviour;

*) iot - improvements to GPIO behavior on boot;

*) iot - improvements to LoRa CUPS;

*) iot - removed bluetooth whitelist maximum entry limit of 8;

*) ipv6 - made "valid" and "lifetime" parameters dynamic for SLAAC IPv6 addresses;

*) isis - show passive interface active levels;

*) l3hw - fixed IPv6 host offloading in certain cases;

*) l3hw - fixed neighbor offloading after link flap;

*) l3hw - preserve offloading for VLANs when bridge ports are down;

*) leds - added "dark-mode" functionality for hAP ax3 and Chateau ax series devices;

*) leds - do not show LTE connection state/mode using RGB power LED from configless LTE modems;

*) leds - fixed "type=on" LED behaviour after reboot;

*) leds - fixed default LTE LED configuration for wAPR-2nD;

*) leds - fixed modem LED indication for SXT LTE 3-7;

*) leds - fixed wireless type of LED triggers for routers using WiFi package;

*) lte - added "at-chat" support for Sierra Wireless EM9293 5G modem;

*) lte - added AT channel support for Quectel EM120K-GL modem;

*) lte - added redial timer when the MBIM modem fails to register or does not receive APN activation notification;

*) lte - don't duplicate primary band in 5G SA mode for chateau 5G;

*) lte - fixed "use-peer-dns" setting for EC200A modem;

*) lte - fixed an issue for EC200A modem that IPv6 address could be added as IPv4 address;

*) lte - fixed APN authentication for FG621-EA modem;

*) lte - fixed MBIM interface enabling for Quectel EC25 modem (introduced in v7.13);

*) lte - fixed Simcom modem support in 0x9000; 0x9002, 0x9002; 0x901a and 0x901b USB compositions;

*) lte - fixed Simcom modem support in 0x9001 USB composition;

*) lte - fixed support for config-less modem detection (introduced in v7.13);

*) lte - fixed USB mode switch and initialization race condition for configless USB modems;

*) lte - improved FG621-EA modem firmware upgrade;

*) lte - improved modem recovery after failed IPv4 configuration;

*) lte - improved support for "ACER" and "MSFT" branded EM12-G modems;

*) lte - optimized "at-chat" response reading;

*) lte - refactored AT command control for AT modems;

*) modem - fixed SMS removal (introduced in v7.13);

*) modem - improved stability when performing modem FOTA upgrade;

*) mpls - fixed VPN fragmentation when forwarding IP traffic;

*) netinstall-cli - check package and device architecture before formatting;

*) ovpn - added support for pushing routes;

*) ovpn - improved "push-routes" option handling when large amount of routes is specified;

*) ovpn - improved key-renegotiation process;

*) ovpn - improved OVPN configuration file import process;

*) ovpn - improved system stability when using HW encryption on ARM64 devices (introduced in v7.13);

*) ovpn - limit the maximum length for "push-routes" up to 1400 characters;

*) package - added "size" property;

*) package - reduced "wireless" package size for ARM, ARM64, MIPSBE, MMIPS devices;

*) package - reduced package size for SMIPS;

*) poe-out - driver optimization for AF/AT controlled boards;

*) poe-out - fixed "power-cycle" for CRS354-48P-4S+2Q+ device (introduced in v7.13);

*) poe-out - improved 802.3at classification and measurement accuracy;

*) poe-out - improved cable test for hAP ac3 and hAP ax3 devices;

*) poe-out - improved PoE out reliability on routers with a single PoE out interface;

*) port - fixed support for USB/serial adapters (introduced in v7.13);

*) port - removed bogus serial port on RB750Gr3, RB760iGS and RBM11G devices;

*) ppp - added support for "WISPr-Session-Terminate-Time" RADIUS attribute;

*) ppp - log an error when IPv6 DHCP pool is exhausted;

*) ptp - added "aes67" and "smpte" profiles;

*) ptp - added configurable "domain" and "priority2" parameters;

*) ptp - added support for Management message forwarding in BC;

*) ptp - fixed "default" and "g8275.1" profiles go into "slave" instead of "uncalibrated" state;

*) ptp - fixed default values for "802.1as" profile;

*) ptp - fixed flags in Announce message;

*) ptp - fixed potential error in packet exchange;

*) ptp - make clock go into grandmaster state if slave port goes down;

*) qos-hw - fixed "tx-queue7-packet" counter;

*) route - fixed gateways of locally imported vpnv4 routes;

*) route - improved route print "count-only" process speed;

*) route - improved stability on route table lookup;

*) route-filter - added option to set "isis-ext-metric";

*) route-filter - fixed AS path matchers when input and output chains are used;

*) routerboard - added "reset-button" support for RBwAPR-2nD device;

*) sfp - added support for modules requiring single byte I2C read transactions;

*) sfp - fixed corrupted Tx traffic at 10Gbps rate on CCR2004-16G-2S+ in rare cases;

*) sfp - fixed corrupted Tx traffic at 10Gbps rate on RB4011 in rare cases;

*) sfp - improve high-power SFP module initialization;

*) sfp - improved combo-sfp handling for CRS328-4C-20S-4S+;

*) sfp - improved link establishment for RB4011 devices;

*) smb - added option to specify SMB service mode as "auto";

*) sms - fixed SMS inbox for FG621-EA modem (introduced in v7.13);

*) sms - fixed SMS sending from WinBox and WebFig (introduced in v7.13);

*) sms - improved system stability when working with SMS;

*) sms - increased SMS read timeout;

*) snmp - added "bgpLocalAs" and "bgpIdentifier" OID reporting;

*) snmp - fixed "bgpPeerFsmEstablishedTime" OID reporting;

*) snmp - hide "MikroTik" in LLDP MIB when branding with hide SNMP option is used;

*) snmp - updated timeout log;

*) ssh - improved SSH performance on ARM, MIPS, MMIPS, SMIPS and TILE devices;

*) ssh - refactored SSH service internal processes;

*) sstp - added support for "aes256-gcm-sha384" encryption;

*) sstp - improved system stability for PPC devices;

*) supout - added PTP section;

*) switch - fixed Ethernet disable/enable for CRS310-8G+2S+ devices;

*) switch - fixed reserved multicast receive on Atheros-8327, QCA8337 switches for R/STP bridge;

*) switch - improved 100G interface stability for 98DX4310 and 98DX8525 switches;

*) switch - minimise potential packet overflows on CRS354;

*) system - changed build time format according to ISO standard;

*) system - expose "lo" and "vrf" interfaces;

*) system - fixed "cpu-frequency" for CRS3xx ARM devices;

*) system - improved memory allocation for ARM64 devices;

*) system - improved RAM allocation for L009UiGS-RM;

*) system - improved system stability when processing packets in FastPath (introduced in v7.13);

*) system - properly assign destination port for HTTP/S connections initiated by the router (introduced in v7.13);

*) system - properly close HTTP/S connections initiated by the router;

*) system - provide more precise "total-memory" value for ARM devices;

*) system - provide more precise "total-memory" value under "System/Resources" menu for L009 and hAP ax lite routers;

*) tftp - improved invalid request processing;

*) timezone - updated timezone information from "tzdata2023d" release;

*) tr069 - don't duplicate cellular info in "X_MIKROTIK_5G" nodes when connected in NR SA mode;

*) tr069 - fixed bandwidth test;

*) tr069-client - show 5G signal info in X_MIKROTIK_5G nodes only for 5G NSA bands;

*) traffic-flow - use 64bit counters for v9 and IPFIX flows;

*) traffic-generator - improved system stability when receiving bogus traffic;

*) usb - show "Supermicro CDC" adapter as Ethernet interface;

*) vlan - fixed non-running VLAN interface after failed MTU change;

*) vrf - prevent VRF interface name collision with interface lists;

*) vxlan - fixed underlying tunnel reusing routing marks of encapsulated packets;

*) webfig - fixed routing table filter under "IP/Routes" menu;

*) webfig - fixed setting the user's password;

*) webfig - fixed showing WireGuard peers;

*) webfig - improved stability when adding new entries under "IP/Routes" menu;

*) wifi - added "station-pseudobridge" interface mode;

*) wifi - fixed issue with setting country profile (introduced in v7.13.1);

*) wifi - improved handling of CAP connections in dual CAPsMAN scenario;

*) wifi - increased value for SAE retransmit period to 3s to improve WPA3 compatibility with IoT client devices;

*) wifi - use "Latvia" as the default value for "country" property;

*) wifi - use correct CAP identity for interface name provisioning after it has been changed by remote-cap/set-identity;

*) wifi-qcom - enable display of regulatory information on L11,L22 devices;

*) wifi-qcom - fixed new connections, when maximum supported number of MAC addresses behind connected station-bridges is reached;

*) wifi-qcom - improve system stability for L11, L22 devices;

*) wifi-qcom - improved memory allocating process;

*) wifi-qcom - improved regulatory compliance for L11, L22 devices;

*) wifi-qcom - improved system stability when using FastPath (introduced in v7.13);

*) winbox - added "accept-protocol-version" parameter to the L2TP server settings;

*) winbox - added "mode-button" and "switch" menus for L41G-2axD&FG621-EA;

*) winbox - added "Name" parameter under "Tools/Netwatch" menu;

*) winbox - added "page-refresh" setting to the Graphing settings;

*) winbox - added "Port Cost Mode" setting under "Bridge" menu;

*) winbox - added "VRF" parameter under "Tools/Ping" menu;

*) winbox - added "x25519" argument for "DH Group" parameter under "IP/IPsec/Profiles" menu;

*) winbox - added missing "Protocol" arguments under "IPv6/Firewall" menu;

*) winbox - added missing monitoring properties under "WireGuard/Peers" menu;

*) winbox - added Preboot Etherboot settings to the System/RouterBOARD/Settings menu;

*) winbox - do not show USB settings for CRS devices that does not need it;

*) winbox - fixed "Bridge Cost" range under "Interfaces/VPLS" menu;

*) winbox - fixed "Password" button under "Quick Set" menu;

*) winbox - improved connection speed and reliability;

*) winbox - improved route table automatic refresh process for static routes;

*) winbox - improved status values under "System/PTP" menu;

*) winbox - improved system stability with large packets;

*) winbox - include "te-tunnel" parameter in VPLS interface monitor;

*) winbox - properly validate "passthrough-subnet-size" in the LTE APN settings;

*) winbox - remove "Root Bridge ID" property under "Bridge/MSTIs" menu;

*) winbox - removed "sfp all" option from combo port settings;

*) winbox - renamed "Wireless Table" menu to "Wifi";

*) winbox - show "routing-table" column under IP/Route menu by default;

*) winbox - show all columns under "Routing/PIM SM/Static RP" menu by default;

*) wireguard - do not allow to use multiple WireGuard interfaces on the same "listen-port";

*) wireguard - optimised and improved WireGuard service logging;

*) x86 - fixed VLAN tagged packet transmit for igb (introduced in v7.12);