Replacing Upvc Window Handles Tips From The Top In The Industry
Replacing uPVC Window Handles
Switching the handles of windows made of upvc is a fairly straightforward task. It is essential to ensure that the replacement handle is fitted into the spindle cutout in the window mechanism.
If you follow the steps below, any cockspur handle will fit on most windows. The step height of the handle is key.
What to Look For
As time passes, uPVC handles on many windows in the UK begin to show signs wear and wear and tear. If this happens, the window handle may become loose or difficult to operate, which makes it necessary to replace it. Anyone who is proficient working with basic hand tools can accomplish this fairly simple task.
The first step is to ensure that the handle is firmly attached to the window frame and is in an open position. The next step is to find the screws or pins which hold the handle. They are usually on the inside face of the handle and are removed with a screwdriver or pliers.
Once the handle has become loose, gently pull it away from its hinges. Then, you'll need to find a new handle of the same dimensions and style. This can be done online or at a local DIY store, and the process should only take around five minutes using an screwdriver.
When replacing the handle of a uPVC handle it is essential to take into consideration the step height. This is the distance from the bottom of the handle until it is placed on the window frame. This is typically a standard measurement, and it is important to determine the step height of your existing handle prior to ordering an entirely new one.
There are several sizes depending on the type of handle. Inline handles for uPVC windows typically feature lug centers of 31mm as well as varieties of cockspur handles with 43mm centres. window handles www.repairmywindowsanddoors.co.uk and turn handles are typically found on windows made of uPVC and they come with a unique design that allows windows to be slid up for ventilation and turned to fully open the window.
The most common uPVC handle breakage is internal cracking instead of a break at the base. This makes them difficult to open and therefore it is crucial to ensure that the replacement handle you purchase has the same length of spindle that your current one.
Remove the old Handle
If your window handles are damaged or incorrectly fitted, they can cause double-glazed windows to not open or close correctly. They could even become stuck. There are a myriad of reasons like general wear and tear, or corrosion of the handle. In these instances it is essential to seek replacement upvc window handles immediately in order to avoid further damage and loss of function.
One of the first steps that you should do when replacing upvc window handles is to remove the old handle from the window. To do this, begin by getting rid of the screw that is covered when the handle is in the closed position. This should reveal another screw, and once it is removed, you are able to begin to remove the handle itself. It is possible to make the task simpler by using an electric screwdriver.
It is also important to be aware that screws could be hidden in caps made of plastic. It is recommended to remove the covers using the help of a Stanley knife. After removing the handle, you will need to check the square cutout on the base to make sure that the new handle you choose for the window lock is compatible. This is important as you'll need to measure the length of the spindle on the previous handle to make sure it is in line with the size of the window mechanism and the handle spindle that has been cut out.
There are three kinds of upvc handles: Espag handles with a central screw that can be turned left or right and Cranked handles with two screws, and Spade handles which have flat arms and can be used on either side of the windows made of upvc. It is simple to replace the handle when you have identified one that is suitable. Just screw it into place, and ensure that the spindle is correctly inserted into the lock mechanism. After that, it should be tightened to the window frame and the replacement upvc window handles should be secure.
Take a look at the Spindle
If you need to replace a handle made of upvc that has collapsed, it's likely the spindle holding it in place is damaged or is loose. In certain situations you can tighten the spindle by using a screw or pin. In some instances, it may be necessary to replace the handle. There are many different kinds of upvc handles. These include inline espagnolette handles, cockspur handles, and tilt and turn handles. Each handle type has its own procedure for installing and removing the handle.
Before you purchase a new handle, it is essential to know the size of the existing one. This will ensure that the new handle is the right size and will fit correctly into the window. Fortunately, all handles follow industry standard sizing so it's quite easy to locate the correct size.
To determine the size of your handle first, take it out of the window by turning it to an open position. You should then be able to see the size of the screw or pin that secures it. Then you can use the ruler or tape measure to determine the length of the spindle. Once you know the length of your spindle, it is possible to purchase a replacement of the exact same length.
The step height of a upvc window handle is another factor to take into consideration when buying replacements. The step height is the distance from the base of the handle until where it sits on the frame. This is usually around 21mm or 9mm in aluminum and uPVC. To be sure that the new handle is suitable it, you can drop something in the gap to check the distance it will go before it meets an obstruction.
Cockspur handles typically have different backset heights depending on the type of window they're installed in. Inline Espag handles come with the standard height of 43mm centre to centre (2 fixing points). Cockspur handles have different backsets, based on the type of window they are in. This is because they have an extension spur that extends from the handle and then locks over a cockspur wedge striker.
Fit the New Handle
Once you've selected the new handle, ensure that it is aligned with the screw holes on the door. Then, secure it with the screws provided. If you're replacing the latch lever the lever can be mounted the same way as the door handle. Then, attach the door trim to hide the mounting screws.
Tips: To remove the metal head from a wooden wedge place the handle on the floor so that its wide end is level with the ground. Then, use a hammer and tap the narrow end. Be careful not to scratch the handle or handle spindle.