Replacing A Window Handle: What's No One Is Talking About
Tips For Replacing a Window Handle
Switching your window handle is a simple task that can be completed from the at-home comforts of your home. Follow these steps to ensure a smooth and beautiful finish.
Start by removing the screws to expose the screws within the uPVC window handle. Make sure you measure the spindle in order to make sure you are getting the correct size replacement.
1. Take a measurement of the Spindle Length
When replacing a window handle, it's important to get the size of the spindle right. This is because it could affect how tight or loose the handle is, and whether it's able to lock properly in the window frame. The spindle is the steel shaft that connects to the handle as well as the lock inside the window frame. The spindle can be either a standard industry 8mm cross-section or the earlier 9mm versions. The current industry standard is 8mm but this was not always the case, so when buying a new handle it's essential to check the dimensions.
The most efficient method to determine the length of the spindle is remove the handle that is currently in place, this can be done by turning it into the open position and unscrewing the two screws (which might be hidden behind plastic caps that need to be removed) which hold the handle. Once removed measure from the base of the handle to the end of the spindle. This will give you the measurement required to buy a replacement.
There are many options available when you're looking to select a new window handle. From sleek chrome that fits into modern homes to traditional burnished bronze that looks great in restored Georgian rooms, or the more classic Tudor cottages with curled mongoose-tail latches. The possibilities are endless, but the most important thing to do is select a style that is suitable for your home.
Espag handles are typically installed to uPVC windows and are identical in size, with 43mm centres (2 fixings). Cockspur handles are available in a variety of sizes, from 58mm to 62mm. Window handles from Cadenza come in a different size due to their bent blade that is used to operate a multi-point lock mechanism inside the window.
Another consideration when selecting the best window handle is knowing what hand you require to use. This is determined by what hand you use to open the door. Inline Espag window handles aren't hand-operated and can be used for left or right handed windows. Cranked window handles are handed and are only used on windows that open in only one direction.
2. Remove the Handle
A window handle that is sagging can be a hassle, regardless of regardless of whether the handle has been damaged or worn out. The good news is that you can fix the uPVC handle yourself. You'll need only the most basic hand tools and some time to complete this process.
You will need to first open the window, and make sure it's not locked. The next step is to remove the screws which hold the handle in place. Once the screw caps are removed you will be able to remove the handle.
The handle is connected to a spindle within the window frame. Depending on the type, this is secured by a screw or pin. The most commonly used handles are the inline Espagnolette and cockspur handles. Both types of handles are found on casement windows, including aluminium ones. They can be locked with keys to prevent the opening of the window from outside, or you can lock them by turning the handle clockwise.
To remove the handle, you will need to use an screwdriver with a flat blade in order to remove the clip that holds the handle in place. After the clip has been released, the handle should be able to slide off the spindle. Once the old handle is removed, you'll have to take a measurement of the length of the spindle to make sure that the new handle will fit.
Once you have determined the correct size for the handle, you can screw it into the correct position. You must ensure that the new handle is firmly fixed and is turning in the correct direction (clockwise for open, or counterclockwise for closed). It is also important to ensure that it is not fitted upside down.
Then, you must replace the screw cover caps. Once you have done this, you can test the handle to make sure that it functions correctly. You should also test the locking mechanism by moving the handle to the locked position, and then back to the locked position.
3. Take off repairmywindowsanddoors is a crucial element of any home and is the first thing to show signs of wear or damage. This could be due natural elements, regular use, or even damage caused by criminals looking to gain access to your home. However, a simple replacement can easily solve the problem and prevent the issue from recurring.
UPVC handles can also be difficult to remove if the locking mechanisms aren't functioning properly. Often, the problem is solved by replacing the multipoint lock instead of the entire handle, and it's worthwhile to check this out as it can save you money.
Once you've removed the old handle you'll need to remove the screws holding it in place. They are usually located on the inside face of the base. It may be necessary to use a screwdriver to accomplish this. Be careful not to over tighten the handle since this could cause it to loosen.
Then you will need to find the pins or screws that secure the handle. They're usually on the inside of the base of the handle. You'll need a screwdriver to remove them. If you want to replace them, you can do so by replacing the caps on the screw and test the handle to make sure it functions correctly.
Install the handle by adjusting the spindle to the window's cutout mechanism. Then, screw it into. Make sure the handle is in an open position and that the screws are tightly fixed before replacing the screws' covers, in the event that you want to do so. Once this is complete you're all done and you are able to enjoy your new window handle. Hopefully this will help you avoid the need for expensive window and door replacements in the future. If you would like assistance regarding this or any other aspect of your uPVC windows do not hesitate to contact us.
4. Install the New Handle
Whether you're replacing a broken handle or simply changing it, the process is surprisingly easy and can be accomplished in just a few steps. Identifying the type of window handle, measuring the length of its spindle and knowing what tools you'll need to finish the job are crucial. Always consider security when working with windows and tools. It is also essential to be patient and follow the steps to ensure you have a working handle that is safe to use.
The first step is to find the screws that hold your existing window handle in place. Then, remove them, while keeping an adequate grip on the handle itself to stop it from falling and injuring yourself. After the screws have been removed, you can put them in a secure location to be replaced later.
After you have removed the handle, you can now begin installing your new handle. It is essential that the handle fits perfectly so that it functions correctly and locks the window in place. Then move the square metal bar on the handle into the hole for the window mechanism.
Now that your new handle is in place, the last thing to do is to replace the screw caps and test it to make sure it works. If you aren't satisfied with the result or if your window does not shut or open properly, call our experts for help.
Almost all homes in the UK have uPVC windows, and as so, a large number of them will require to be replaced due to wear or breakage. Anyone with some DIY experience can easily complete the task. It is crucial that the handle you use is in line with the style and size of your window. Contact us if you aren't sure of the kind of handle that you need. They'll be able to guide you through the options.