Replacing A Window Handle: It's Not As Difficult As You Think
Tips For Replacing a Window Handle
Changing your window handle is a simple project that can be completed in the at-home comforts of your home. Use these helpful tips to ensure a smooth operation and great look.
Remove the screw covers from your uPVC handle to reveal the screws. Measure the spindle to make sure you're getting the right size replacement.
1. Measure the Spindle Length
It's important that you ensure the correct size of the spindle when replacing windows handles. It can affect the tightness or elasticity of the handle as well as whether the handle locks correctly into the window frame. The spindle is a steel shaft that connects the handle to the lock in the window frame. The spindle can be found in the standard 8mm cross-section for industry or older 9mm versions. Modern industry standards are 8mm, but it wasn't always the case. It is crucial to confirm the measurements before buying the handle you want to purchase.
Take the handle off. This is easily done by turning the handle into the open position, then taking off two screws that hold the handle in place (which are usually hidden behind plastic caps which must be removed). Once removed take a measurement from the base of the handle to the end of the spindle. This will provide you with the measurements you need to buy a replacement.
There are a variety of options when you are looking to pick a new window handle. From sleek chrome that fits in with a modern style, to traditional burnished bronze that looks great in restored Georgian rooms, or even the more traditional Tudor cottages with curled mongoose-tail latches. The possibilities are endless, but the most important thing is to select a style that is suitable for your home.
Espag handles are typically installed to uPVC window frames and are always the same size with a 43mm center. Cockspur handles vary between 58mm and 62mm, but luckily there are replacements available for both sizes. Window handles made of Cadenza are a different size again since they have an angled blade that operates a multi-point locking mechanism inside the window.
When selecting a window handle it is important to consider the hand you use to open your door. Inline Espag window handles aren't handed and can be utilized on right or left handed windows. Cranked window handles are hand-operated and are only used on windows that open in one direction.
2. Remove the Handle
A window handle that falls out can be a hassle, regardless of regardless of whether the handle is damaged or worn out. The good news is, you can replace the uPVC handle yourself. You will require only some basic hand tools and time to complete the task.
You must first open the window and make sure it's not locked. Next, you need to remove the screws that hold the handle in place. After the screw caps are removed, you will be able to remove the handle.
The handle is connected to a spindle in the window frame. It is fixed with either a screw or pin according to the type of handle. The most commonly used types of handles are inline Espagnolette handles and the cockspur handles. Both of these types of handles are employed on casement windows, as well as aluminium windows. They can be locked by using a key to prevent unauthorised opening of the window from the outside, or you can lock them by turning the handle clockwise.
To take the handle off, you will need to use an screwdriver with a flat blade in order to remove the clip that holds the handle in place. When this clip is released the handle will fall off the spindle. Once the old handle is removed, you'll need measure the spindle length and ensure that the new handle is a good fit.
Once you have the correct size, you can fix the new handle into the correct position. You must ensure that the new handle is firmly secured and that it is turning the correct way (clockwise for open, or counterclockwise for closed). It is crucial to ensure that the handle has not been placed upside down.
Then, you must replace the screw cap caps. After you've completed this step, you can test your handle to make sure it is working correctly. You can also test the locking mechanism by moving the handle from the unlocked position to the locked position and back.
3. Remove the Screws
A uPVC handle is a crucial part of any house and is the first item to show signs of wear or damage. This can be due to natural factors, regular use, or even damage caused by criminals who want to gain access to your home. However, a simple repair will solve the issue and stop the problem from recurring.
upvc door handle replacement taunton www.repairmywindowsanddoors.co.uk can be difficult to open when the locking mechanism isn't functioning properly. Often, the problem can be solved by replacing the multipoint lock, rather than the entire handle and it's certainly worth checking this as it can save you money.
Once you've removed the old handle, you'll need to take off the screws that were that held it in place. These screws are usually found on the inside of the handle base. You may need to use a screwdriver to accomplish this and it's important that you don't over tighten the screw as this could cause the handle to become loose.
You will then need to find the fixing pins or screws that hold the new handle in the correct position. They are typically located on the inside of the base of the handle. You'll need a screwdriver to remove them. After they've been removed, you'll need to replace the screw caps in the event that you want to do so and test the new handle to ensure it's functioning properly.
Install the handle by adjusting the spindle with the cutout in the window mechanism. Then screw it into. Make sure that the handle is in an open position and that the screws are secured before replacing the screws' covers should you wish to do so. It's done! You can enjoy the newly installed window handle. This will hopefully help you avoid expensive window and door replacements in the future. If you would like more assistance with this or any other aspect of your uPVC windows do not hesitate to contact us.
4. Install the new handle
Whether you're replacing a broken handle or simply updating it the procedure is easy and can be accomplished in a matter of a few steps. Identifying the kind of window handle, measuring its spindle length, and knowing the tools you'll require to complete the task are essential. Always consider security when working with windows and tools. Take your time to follow the steps and ensure that you have a handle that is safe to use.
The first step is to identify the screws that hold your current window handle in place. Then, take them out, while maintaining an appropriate grip on the handle to prevent it from falling and causing injury. Once the screws have been removed, you can place them in a safe location to be replaced later.
Once the old handle was removed, you are now able to begin fitting your new one. It is important that the handle is fitted perfectly to ensure it is functional and secures the window in its place. The next step is to slide the square metal bar at the back of the handle into the hole in the window mechanism, making sure it is secure.
Once your new handle is installed, the final step is to replace the screw caps and test it to make sure it works. If you aren't satisfied with the result or the window doesn't open or close correctly, call our experts for assistance.
Most homes in the UK have uPVC windows and as so, a large number of them will require to be replaced due to damage or wear. Anyone with some DIY experience can easily complete the task. It is essential that the handle you use matches the size and style of the window. If you're not sure about the kind of handle you'll require, please get in touch with our team who can guide you through the choices available.