Replacing A Window Handle Isn't As Difficult As You Think
Tips For Replacing a Window Handle
It is easy to change your window handle in the comfort of your home. Follow these tips to ensure an elegant and smooth finish.
Begin by removing the screws to reveal the screws within your uPVC window handle. Then measure the spindle length to ensure that you get the correct size replacement.
1. Take a measurement of the Spindle Length
If you're replacing a window handle it's important to get the size of the spindle correct. This is because it will determine how tight or loose the handle is, and whether it's able to lock properly within the window frame. The spindle is a steel shaft that connects the handle to the lock in the frame of the window. The spindle can be either a standard industry 8mm cross-section or the earlier 9mm versions. Modern industry standards are 8mm, however it wasn't always the case. It is important to verify the measurements prior to purchasing a new handle.
Take the handle off. This is done by turning the handle into the open position, and unwinding two screws that hold the handle in place (which are usually hidden behind plastic caps which are required to be removed). Once the handle is removed, take a measurement from the base to the end. This will provide you with the measurements needed to buy a replacement.
There are plenty of options when it comes to selecting the right window handle from sleek chrome that blends into modern homes to traditional burnished brass that looks wonderful in restored Georgian rooms, or the more traditional Tudor cottages with curved monkey tail latches! There are many options to choose from, but the most important thing is to choose one that complements your home's style.
Espag handles are generally installed to uPVC windows and are always the same size with 43mm centers (2 fixings). Cockspur handles are available in a variety of sizes, starting at 58mm to 62mm. Window handles made of Cadenza have a different size as they feature an bent blade that is used to operate a multi-point lock mechanism inside the window.
When selecting a window handle take into consideration the hand you use to open your door. Inline Espag handles can be used with either left or right-handed windows. Cranked window handles are only compatible on windows that open in one direction.
2. Take the handle off
A window handle that has fallen out can be a hassle, regardless of regardless of whether the handle has been damaged or worn out. The good news is that you can repair a uPVC handle yourself. All you need are the most basic tools and some time to complete the process.
First of all, you have to open the window and make sure that it's in an unlocked position. The next step is to remove the screws that are holding the handle in position. Once upvc door handle are removed, you can begin to work on removing the handle itself.
The handle itself is fixed to a spindle in the window frame. Depending on the kind, this is held in place either by a screw or pin. The most popular handles are the inline Espagnolette and cockspur handles. Both types of handles are found on casement windows, including aluminium ones. They can be locked using keys to stop unauthorised opening of the window from outside, or you can lock them by turning the handle clockwise.
To take the handle off, you will require a flat-bladed screwdriver. When this clip is released the handle will fall off the spindle. When the handle is removed, you will have to determine the length of the spindle and ensure that your new handle is compatible with this size.
Once you have the right size, you can now screw the new handle in the correct position. You will need to ensure that the new handle is firmly fixed and is turning in the correct direction (clockwise for open or counterclockwise for closed). It is also crucial to ensure that it isn't fitted upside down.
Finally, you should replace the screw cap caps. After you've done that then you can test the handle to ensure that it is working properly. You can also test the locking mechanism by shifting the handle from the unlocked position to the locked one and then back.
3. Remove the Screws
A uPVC window handle is a crucial part of any home and is usually the first item to show signs of wear and tear or damage. This could be due to natural factors, regular use, or even damage caused by criminals trying to gain access to your home. A simple repair can fix the problem and prevent it from happening again.
UPVC handles can also be difficult to remove if the locking mechanisms aren't working correctly. It's usually possible to resolve the issue by replacing the multipoint locking mechanism, rather than the whole handle. This could help you save money.
After you have removed the handle, you'll need to take off the screws that were holding it in place. These are typically located on the inside of the base. You may need to use a screwdriver for this and it's crucial that you don't over tighten as this can cause the handle to become loose.
The next step is to find the fixing pins or screws that hold the new handle in place. They're usually on the inside of the handle base. You will need a screwdriver to take them off. If you wish to replace them, you can do so by replacing the screw caps and check the handle to ensure it works correctly.
Install the handle by aligning the spindle to the window's cutout mechanism. Then screw it into. Make sure the handle is in an open position and that any screws are securely secured prior to replacing the screws' covers, should you wish to do this. It's done! You can enjoy the newly installed window handle. I hope this will enable you to avoid the need for expensive replacement of your door and window in the future. If you would like assistance regarding this or any other aspect of your uPVC windows do not hesitate to contact us.
4. Fit the New Handle
Whether you're replacing a broken handle or simply making it more modern the procedure is easy and can be accomplished in just a few steps. Identifying the kind of window handle, determining its spindle length, and knowing what tools you'll need to complete the task are key. Safety is always the first priority when working with tools and windows. Be sure to follow the steps and ensure that you have the right handle to use.
The first step is to locate the screws that hold your current window handle and remove them, while keeping an adequate grip on the handle to prevent it from falling and result in injury. After the screws have been removed and repositioned, they can be put in a safe spot to be replaced in the future.
After the handle that was used previously was removed, you can now begin fitting your new handle. The handle should be perfectly positioned to function properly and hold the window in its closed position. The next step is to slide the metal square at the back of the handle into the hole in the window mechanism, making sure it is securely in place.
The final step is to replace the screws caps and test the handle to ensure that it is working. If you aren't satisfied with the result or the window doesn't open or close correctly contact our experts for help.
Almost all UK homes have uPVC Windows. This means that a lot of them will require replacement at some point due to damage or wear. Anyone with some DIY knowledge can carry out the process. The most crucial aspect to the success of the procedure is ensuring that you're using a replacement handle which matches your existing window in terms of dimensions and style. If you're not sure what type of handle you require, don't hesitate to contact our team who can help you navigate the various possibilities available.