Replacing A Window Handle Isn't As Difficult As You Think
Tips For Replacing a Window Handle
Switching your window handle is an easy project that can be completed from the at-home comforts of your home. Follow these tips to ensure an elegant and smooth finish.
Remove the screw covers from your uPVC handle to expose the screws. Measure the spindle's length to ensure that you get the correct size replacement.
1. Take a measurement of the length of the Spindle.
When you're replacing a window handle, it's important to determine the dimensions of the spindle correct. It could influence the tightness or looseness of the handle and whether the handle will lock properly into the frame of the window. The spindle is a metal shaft that connects to the handle and the lock in the frame of the window. The spindle could be a standard 8mm cross-section in the industry or the earlier 9mm versions. Modern industry standards are 8mm but it wasn't always the case. It is important to verify the measurements prior to buying a new handle.
Take the handle off. This can be done easily by turning the handle to the open position, then unscrewing two screws that hold the handle in place (which are often hidden behind plastic caps which are required to be removed). Once the handle has been removed, measure the distance from the base to the point at which it ends. This will provide you with the measurements needed to buy a replacement.
There are plenty of options when it comes to choosing the right window handle from sleek chrome that blends in with a modern home, to traditional burnished brass that looks wonderful in restored Georgian rooms, or the more traditional Tudor cottages with curved monkey tail latches! There are many options to choose from, but the most important thing is to pick the style that is appropriate to your home's style.
Espag handles are commonly fitted to uPVC window frames and are always the same size with a 43mm central. Cockspur handles are available in a variety of sizes, ranging from 58mm to 62mm. Window handles made of Cadenza have distinct dimensions because they have an angle blade that operates an interlocking mechanism that is multi-point inside the window.
When selecting a window handle it is important to consider the hand you use to open your door. Inline Espag window handles aren't handed and can be utilized for left or right handed windows. Cranked window handles are handed and can only be used on windows that open in only one direction.
2. Take the handle off
Whether the handle is damaged or simply worn out the handle of a window that is shattered can be very frustrating. But the good news is that replacing a uPVC window handle is a straightforward task that you can complete yourself. All you require is a few basic tools and a bit of time to complete the task.
You must first open the window, and ensure that it is not locked. Next, you need to remove the screw caps that hold the handle in place. After the screw caps are removed you will be able remove the handle.
The handle is connected to a spindle within the window frame. The handle is held in place by a pin or a screw, depending on the type of handle. The most common handles are the inline Espagnolette and the cockspur handles. Both these types of handles are employed on casement windows, as well as aluminium windows. The handles can be locked with a key to prevent unauthorised access from the outside. You can also lock the handles by turning them clockwise.
To take the handle off, you will need to use a screwdriver with a flat blade to loosen the clip that holds the handle in place. After the clip has been released, the handle should slide off the spindle. After the handle is removed, you'll have to determine the length of the spindle and make sure that the new handle will fit.
Once you have decided on the proper size for the handle, you can screw it into place. It is essential to ensure that the handle is securely fastened and that it is rotating in the correct direction (clockwise when the handle is open or counterclockwise if the handle is closed). It is also essential to check that it isn't fitted upside down.
Replace the cap screws. Once you've completed this step, you can test the handle to make sure it is working correctly. You can also test the locking system by moving the handle from the unlocked position to the locked and back.
3. Take the Screws off
A uPVC handle is a crucial component of any house and is the first item to show signs of wear or damage. This could be due natural causes, frequent use or even intentional damage by criminals who want to gain access to your home. A simple replacement can solve the issue and stop it from happening again.
UPVC handles can be difficult to open when the locking mechanism isn't functioning correctly. In most cases, the issue can be solved by replacing the multipoint lock instead of the entire handle and it's certainly worth checking this since it can save you money.
After you have removed the handle, you will need to take off any screws that secured it. repairmywindowsanddoors are usually found on the inside of the base of the handle. It could be necessary to use a screwdriver to do this. Be cautious not to over tighten the handle since this could cause it to loosen.
Then, you'll need to find the pins or screws that keep the handle in place. They will likely be located on the inside of the base of the handle and you will need to use an screwdriver or a pair of pliers in order to remove them. After you have removed them, you'll have to replace the caps on screws if you wish to do so and test the new handle to confirm that it's working correctly.
Install the handle by aligning the spindle to the cutout in the window mechanism. Then, screw it into. Make sure that the handle is in the open position and that the screws are securely secured prior to replacing the screw covers should you wish to do this. After this is done, you're done and can enjoy your new window handle. We hope this will allow you avoid having to pay for costly replacement of your door and window in the future. If you'd like to get assistance in this, or any other aspect of your uPVC windows do not hesitate to contact us.
4. Fit the New Handle
If you're replacing a damaged handle or simply updating it the process is easy and can be accomplished in just a few steps. Identifying the type of window handle, measuring its spindle length, and knowing the tools you'll require to complete the task are essential. Always consider the safety of your windows and tools. Make sure you follow the steps and ensure that you have the right handle for use.
To begin, find the screws that hold the window handle in place. Remove these while holding the handle firmly to stop it from falling and causing injury. Once the screws are removed, you can place them in a safe place to be replaced later.
After removing the old handle, you are now able to put in your new one. It is important that the handle is fitted perfectly to ensure that it is functional and secures the window in its place. Next move the square metal bar attached to the handle into the window mechanism hole.
The final step is to replace the caps on the screws and test the handle to make sure it works. If you're not happy with the result or if the window does not open and close as it should, the next step is to call our experts who can help.
Almost all homes in the UK have uPVC windows. As such, many of them will need to be replaced at some point due to damage or wear. Anyone with a little DIY knowledge can accomplish the task. The most crucial aspect to the success of this procedure is to ensure that you're using a handle that matches the window's dimensions and style. If you're not sure about the type of handle you require, please contact our team who will be able to help you navigate the various options available.