Replacing A Window Handle Explained In Less Than 140 Characters
Tips For Replacing a Window Handle
The replacement of your window handle is a simple project that can be completed from the comfort of your own home. Follow these handy tips for a smooth operation and great look.
Begin by removing the screws to reveal the screws within your uPVC window handle. Then, measure the length of the spindle to ensure that you receive the right size replacement.
1. Take a measurement of the length of the Spindle.
It is crucial to have the right size spindle when replacing windows handles. It can affect the tightness or looseness of the handle, as well as whether the handle locks correctly into the window frame. The spindle is a steel shaft that connects the handle to the lock in the frame of the window. The spindle is available in either the standard cross-section of 8mm for industry or the more traditional versions that measure 9mm. Modern industry standards are 8mm, but it wasn't always this way. It is important to check the measurements when purchasing the handle you want to purchase.
The most efficient method to determine the spindle length is to take off the handle you have already installed and this can be done by turning it to the open position, then unscrewing the two screws (which might be hidden behind plastic caps that will need to be removed) which hold the handle. Once the handle has been removed, take a measurement from the base to the point at which it ends. This will give you the measurement required to purchase a new one.
There are many options when it comes to choosing the right window handle from sleek chrome that fits into a contemporary home to traditional brass with a burnished finish that looks great in restored Georgian rooms, or the more classic Tudor cottages with curled monkey tail latches! There are many options to choose from, but the most important is to pick the style that is appropriate to your home.
Espag handles are generally fitted to uPVC windows and are identical in size with 43mm centers (2 fixings). Cockspur handles are available in a variety of sizes, from 58mm to 62mm. Window handles from Cadenza come in a different size as they feature an angle blade that operates a multi-point lock mechanism inside the window.
When selecting a window handle, you should also consider the hand you use to open your door. Inline espag handles are compatible with right or left-handed windows. Cranked window handles are hand-operated and can only be used on windows that open in only one direction.
2. Remove the Handle
Whether the handle is damaged or worn out the handle of a window that is shattered is a major source of frustration. But the good news is that replacing the uPVC window handle is a straightforward task that you can complete yourself. You only need a few basic hand tools as well as some time to complete this process.
You must first open the window and make sure it's not locked. Then, you need to remove the screw caps holding the handle in place. After the screw caps are removed then you'll be able remove the handle.
The handle is attached to a spindle inside the window frame. It is fixed with screws or pins according to the type of handle. The most popular handles are the inline Espagnolette and the cockspur handles. Both types of handles can be found on casement windows including aluminium ones. You can lock the handles with a key to stop unauthorised access from the outside. You can also lock the handles by turning them clockwise.
To remove the handle you will need to use a screwdriver with a flat blade to loosen the clip that holds the handle. After the clip has been released, the handle will be able to slide off the spindle. After the handle has been removed, you'll need to take a measurement of the length of the spindle to ensure that the new handle is a good fit.
Once you have determined the proper size of the handle, you can screw it into place. You must make sure that the new handle is securely fixed and is turning in the correct way (clockwise for open and counterclockwise for closed). It is also crucial to make sure that it isn't installed upside down.
Then, you must replace the screw cap caps. After you have completed this step, you are able to test the handle to make sure that it's working properly. You can also test the locking system by moving the handle from the unlocked position to the locked position and back.
3. Take off the Screws
A uPVC handle is an important component of any house and is the first thing to show signs of wear or damage. It can be caused by natural elements or by frequent use, and sometimes malicious damage caused by opportunistic criminals who might want to open a closed window and gain access to your home. However, a simple replacement will solve the issue and stop the issue from happening again.
UPVC handles can be difficult to open if the locking mechanism isn't working correctly. It's often possible to solve the issue by replacing the multipoint locking mechanism, rather than the entire handle. This can help you save money.
Once you've removed the old handle you'll need to remove the screws fixing it to the base. They're usually on the inside face of the base. You may need to use an screwdriver to do this, and it's important that you don't over tighten, as this could cause the handle to loosen.
Then, you'll need to locate the pins or screws that secure the handle. They're usually on the inside of the base of the handle. You'll need an instrument to remove them. After you have removed them, you'll need to replace the screw caps if you wish to do so and test the new handle to make sure it's working correctly.
Install the handle by adjusting the spindle with the cutout in the window mechanism. Then, screw it in. If you wish to replace the screws ensure that the handle is in a position that is open and any screws are securely fixed. Once this is complete you're done and can enjoy your new window handle. This should help you avoid expensive window and door replacements in the near future. If you would like more help with this or any other aspect of your uPVC windows don't hesitate to get in touch with us.
4. Fit the New Handle
The procedure of replacing a damaged window handle or updating it is simple and can be accomplished in only a few simple steps. The first step is to determine the type of handle, take measurements of its spindle and know what tools you'll require to complete the job. Safety is always the top priority when working with tools and windows. Make sure you follow the steps and ensure that you have the right handle to use.
The first step is to locate the screws that hold your current window handle in place and remove them, while keeping an adequate grip on the handle to prevent it from falling suddenly and injuring yourself. After the screws have been removed, you can put them in a safe place to be replaced later.
After the handle that was used previously has been removed, you are now able to begin fitting your new handle. It is crucial that the handle is fitted perfectly to ensure it is functional and secures the window in its place. The next step is to slide the square metal bar at the back of the handle into the hole of your window mechanism, making sure it is securely in place.
The final step is to replace the screws caps and test the handle to ensure it works. If you're not satisfied with the result or if the window does not open and close as it should then the next step is to call our experts who can help.
Most UK homes are equipped with uPVC Windows. Therefore, a large number of windows will require replacement at some point because of wear and tear or breakage. Anyone with a bit of DIY expertise can complete the task. It is important that the handle you choose matches the size and style of your window. Contact our team if you are unsure about the type of handle you need. They will be able guide you through all the choices.