Replacing A Window Handle Explained In Less Than 140 Characters
Tips For Replacing a Window Handle
It is easy to change your window handle in the convenience of your own home. Follow these tips for a smooth operation and great look.
Start by removing the screw covers to expose the screws inside your uPVC window handle. Measure the spindle's length to ensure you get the correct size replacement.
1. Determine the length of the Spindle.
When you're replacing a window handle it's important to get the size of the spindle right. This is because it could determine how tight or loose the handle is and whether it's able to lock properly in the frame of the window. The spindle is the steel shaft that connects the handle and to the lock within the window frame. The spindle is available in either the standard cross-section of 8mm for industry or the more traditional versions that measure 9mm. The modern industry standard is 8mm, but this wasn't always the case. When buying a new handle it is important to check the measurements.
The most efficient method to determine the spindle length is to remove the existing handle and this can be done by turning it into an open position and unscrewing the two screws (which may be hidden behind plastic caps that require removal) that hold the handle. Once the handle is removed, measure the distance from the base to the end. This will give you the measurement needed to purchase a replacement.
There are a lot of choices when it comes to choosing a new window handle from sleek chrome that fits into modern homes to traditional burnished brass that looks wonderful in restored Georgian rooms, or the more traditional Tudor cottages with curved monkey tail latches! The options are endless but the most important thing is to select a style that is suitable for your home.
Espag handles are typically fitted to uPVC windows and are identical in size, with 43mm centers (2 fixings). Cockspur handles are available in a variety of sizes, starting at 58mm up to 62mm. Cadenza window handles have a different size as they feature an bent blade that is used to operate a multi-point lock mechanism inside the window.
Another consideration when selecting the right window handle is determining what hand you will need, this is simply defined by what hand you use to open the door. Inline espag handles are compatible for left or right-handed windows. Cranked window handles are only compatible with windows that open in one direction.
2. Take the handle off
Whether the handle is damaged or worn out, a window handle that is shattered can be a real pain. But the good part is that replacing the uPVC window handle is a very easy job that you can do yourself. You'll need only a few basic hand tools and some time to complete the process.
You will need to first open the window, and then ensure that it's not locked. Then, you need to remove the screws that hold the handle in position. Once these caps are removed, you are able working on the removal of the handle itself.
The handle itself is fixed to a spindle within the window frame. The handle is held in place by screws or pins dependent on the kind of handle. The most commonly used handles are the inline Espagnolette and the cockspur handles. Both kinds of handles can be found on casement windows, including aluminum ones. You can lock the handles with a key to block access by unauthorised persons from outside. Or you can lock the handles by turning them clockwise.
To take the handle off, you will require a flat-bladed screwdriver. After this is released, the handle will fall off the spindle. Once the old handle is removed, you'll need measure the spindle length and ensure that the new handle is a good fit.
Once you have determined the proper size for the handle, you can screw it into place. You must make sure that the new handle is firmly fixed and is turning in the correct direction (clockwise for open and counterclockwise for closed). It is essential to ensure that the handle has not been installed upside down.
In the end, you must replace the screw cover caps. Once you have done this then you can test the handle to confirm that it is working properly. It is also recommended to test the locking mechanism by moving the handle to the locked position and then returning it to the locked position.
3. Take off the Screws
A uPVC handle is a crucial element of any home and is the first item to show signs of wear or damage. This could be due to natural factors, regular use or even intentional damage by criminals trying to gain access to your home. A simple replacement can solve the issue and stop it from happening again.
uPVC handles may also be difficult to remove if the locking mechanisms are not functioning properly. In most cases, the issue can be resolved by replacing the multipoint lock rather than the entire handle and it's definitely worth a look since it can save you money.
After you've removed the old handle, you will need to take off any screws that were holding it in place. These screws are usually found on the inside of the handle base. You may need to use a screwdriver to accomplish this and it's essential to not over tighten as this can cause the handle to become loose.
Then, you'll need to find the pins or screws that hold the handle in place. They are typically located on the inside of the handle base. You will need a screwdriver to take them off. After they've been removed, you'll have to replace the screw caps should you choose to do so, and then test the new handle to make sure it's functioning properly.
If you're ready to put in the new handle, simply align the spindle with the cut-out in the window mechanism and screw in the appropriate position. Make sure that the handle is in the open position and that the screws are secured before replacing the screws' covers if you wished to do this. Once you've completed this, you're done and can enjoy your new window handle. We hope this will allow you avoid having to pay for costly window and door replacements in the future. If you'd like assistance with this or any other aspect of your uPVC windows don't hesitate to get in touch with us.
4. Install the New Handle
The process of replacing a broken window handle or updating it is easy and can be completed within a few easy steps. Identifying the type of window handle, determining its spindle length and knowing what tools you'll need to finish the job are crucial. Always ensure safety when working with windows and tools. It is also essential to take your time and follow the steps to ensure that you have a functional handle that is safe to use.
The first step is to find the screws that hold your current window handle in place. Then, take them out, while maintaining an adequate grip on the handle itself to stop it from falling suddenly and causing injury. After the screws have been removed, you can place them in a secure location to be replaced in the future.
After removing the old handle, you can begin to install your new one. It is important that the handle is fitted perfectly to ensure it is functional and secures the window in its place. The next step is to slide the square metal bar on the back of the handle into the hole of the window mechanism, making sure it fits securely.
Once your new handle is installed, the final step is to replace the caps on the screws and test it to make sure it functions. If you're not satisfied with the outcome or if the window does not open and close as it should, the next step is to contact our experts who will be able to assist.
The majority of homes in the UK have uPVC windows. As so, upvc door handles Repair My Windows And Doors of them will have to be replaced in the near future due to damage or wear. The process is relatively straightforward and can be completed by anyone with some knowledge of DIY. The most important factor in the success of the process is making sure you're using a handle which matches your window's dimensions and style. If you're not sure what type of handle you need, feel free to contact our team who can guide you through the choices available.