Replace Lock In Upvc Door It's Not As Hard As You Think
Replace Lock in UPVC Door
If you have a Upvc door lock that's not working correctly, you need to call a professional locksmith. They are fast, efficient and can complete the job to a high standard.
It's not that difficult to replace a upvc bar lock. You just need to know what is involved and follow the steps below.
Remove the barrel lock
Upvc windows and doors are commonplace in a wide range of homes. They are great for allowing sunlight into your home and are simple to open with the correct key. The process of changing the barrel on the uPVC door is an easy task that can be completed in just five minutes. It's a simple fix if you have lost your key, a tenant has left and not returned it or the barrel of your lock is damaged.
You'll need to remove the handle screws first. This is to get the handles out of the way so that you can access the lock barrel screw. Do not loosen the screws quickly since this could cause damage to the handles.
After the screws have been removed, find the screw that holds the barrel lock in position on the inside of your door. It is a screw that stands out and is a different color than the screws on the door. Using a Phillips screwdriver, take out this screw. Then, take the current key that is used for the lock and place it in the barrel. Turn it to the right as much as you can. This should let the barrel loose and make it easier to pull it out of the door.
After loosening the screw, you can now break the pins that hold the Euro Cylinder. You'll need pliers that are strong, or mole grips to do this. Take the protruding end of the euro cylindrical cylinder and bend it upwards and down, and from side to side. This will break the support pins holding it in place.
Once the old cylinder has been taken gone, you can begin the process of putting in the new one. To ensure that you get the right replacement, you need to first determine the cylinder's size. This can be done by measuring the distance between the center of circular keyhole and the center of square spindle. The measurement should be taken at the top of the spindle.
Modifying the Cylinder
The euro cylinder is the primary locking mechanism for a upvc door. It is easy to replace and does not require a locksmith or handyman. If your lock doesn't have this protection, you should replace it with one that does. These are inexpensive and can help you save money and time in the case that your locks have been compromised.
To begin to begin, open the door and stand in front of it, so that you can easily reach the handle retaining screw by hand or using an appropriate tool. Loosen this a little or maybe a quarter turn to start the process.
The cylinder will be easy to remove since the screw will stop holding it in position. Next, you'll need to decide on the size of the replacement cylinder you need. There are around 25 sizes available. It is a good idea to bring your old cylinder with you when you buy a new one so that you can be sure it will fit.
If you're not sure of the size, measure from the center of the screw hole to the end of cylinder. You can only be sure that you're purchasing the correct sized cylinders for your door made of upvc by measuring from the center of the screw hole to the end of the cylinder.
Insert the replacement cylinder into your door the opposite way you removed the old one. It might be difficult to align the lock cam, but it is usually an issue of alignment and should come right eventually.
The next step is to screw in the long screws for securing. After that, you are able to test it to make sure that the cylinder is secure within the door. If you're satisfied that it is, you can then reattach the handle and close the door to test again. If everything is working properly, your cylinder lock on your door made of upvc has been replaced and has added an extra layer of security for your home.
Change the Handle
There are many reasons why a door knob can become loose. It can be due either to the wear and tear on the handle or the spindle that is square inside the handle. In this scenario, the door handle will need to be replaced.
It is important that the door be propped open so it cannot close between taking the handle off and replacing it. Remove the screws from the inner surface of the handle plate using the help of a screwdriver. This will remove your handle from the plate. Be careful not to loose the screws as they'll need to be re-screwed back into place later.
It is now possible to remove the handles to get access to the cylinder lock inside the door. The cylinder lock will be round or bulb-shaped and is only found in multi-point locks on upvc and some aluminum doors. Changing the cylinder is much like changing the handle. The only difference is that you'll have to take the old cylinder out of the door and replace it with a brand new one.
When selecting the replacement handle, it's important to consider the size. Make sure the handle is identical in size to the original as it will need to fit over the screws that hold the handle in place. It is best to start by looking at a size table that lists the most commonly used sizes of replacement handle plates and their keyhole centers.
It is also worth considering changing your handles for your Upvc doors to more secure standards, like the Sold Secure SS301 or a 2* Kitemark set of security handles. This will improve the security of your house and make it easier to operate your door. These sets are a bit more expensive but the added security and peace mind is worth the cost. To constantly push the handle of the door up and down in order to shut or open it is not something you want to be doing.
Change the Lock
The security of your uPVC lock could be a weak point for burglars. It is possible to upgrade your uPVC door to a multipoint lock to make it more secure. This would include an open hook and deadbolts to ward off burglars. You can employ a professional locksmith to assist you, but you could also do it yourself. The process is fast and easy. You will only need some basic tools.
The first step is to loosen the screws that hold the handle in place. You can take the screws off using a screwdriver and put them in a secure place. Then, you can raise up the handle to reveal the screw that holds the cylinder in place. This screw can be unscrewed and replaced with a new one. Make sure the screw you choose to replace is of the same size as the one you used before. It should line up correctly to the lock barrel.
Making changes to the lock of your uPVC door can be a challenge. It is crucial to the security of your home. If you make a mistake, it could make it impossible to unlock the door. If you are aware of how to do it, the process is fairly easy and costs much less than calling a locksmith.
To change the lock on your uPVC door, you will have to get access to the inside faceplate of the lock. You will need to be able see the screw that is located inside the door, as well as the retaining bolt on the outside of the door. Once you have these screws in your hands, you are able to remove and replace the faceplate.
You may need to change the lock of your uPVC door for several reasons. You may need to change the lock on your uPVC door due to a number of reasons.
Changing a uPVC lock can be done by anyone with basic DIY skills. If the lock is stuck, you'll have to examine the hinges in the mechanism. If replacement window locks have been lubricated then it is an easy fix. If you're not sure you can do it, consult an expert.