Replace Lock In Upvc Door Explained In Fewer Than 140 Characters
Replace Lock in UPVC Door
If you have a Upvc door lock that isn't working properly, you must call an expert locksmith. They are fast, efficient, and will complete the work to a high standard.
Change the barrel lock of a Upvc barrel isn't difficult to do. It's just a matter of knowing what you need to do and follow the steps below.
Remove the barrel lock
uPVC windows and doors are extremely common in a wide range of homes. They let natural light get into the home and be opened with the correct key. Changing the lock barrel on a uPVC door is a simple task that takes only five minutes. If you have lost your keys, or a tenant has left but has not returned them, or if the lock barrel is damaged and needs to be replaced, this is an easy solution.
You'll need to take out the handle screws first. This is to get the handles away from the way so that you can access the lock barrel screw. Do not loosen the screws quickly since this could cause damage to the handles.
Once the screws have been removed Find the screw that is on the inside of the door that is holding the barrel lock in place. It is a screw that stands out and is different in color from the screws on the door. Take it off with a Phillips screwdriver. Then, take the current key that is used for the lock and place it in the barrel. Turn it to the right as far as you can. This should let the barrel loose and make it easier to pull out of the door.
Once you have loosen the screw it's time to break the pins that support the euro cylinder in place. You'll require a pair of strong pliers, or mole grips to accomplish this. Take the protruding portion of the euro cylinder and bend it from side to the side and upwards and downwards. This will break the support pins that hold it in place.
Installing the new cylinder can be done after the old one was removed. To ensure that you get the correct replacement, first measure the lock cylinder. This can be done by measuring the distance between the center of circular keyhole and the center square spindle. The measurement must be taken from the top of the spindle hole.
Change the Cylinder
The primary locking mechanism is the euro cylinder. It is easy to change and don't need the services of a locksmith or handyman. If yours does not have this security feature, you must replace it with one that has. These are very inexpensive and can save you money and inconvenience when your locks are affected by these security threats.
Open the door and stand in front of it. This will allow you to reach the screw that holds the handle by hand or with an appropriate tool. Then loosen it a bit or maybe a quarter turn to start the process.
The cylinder should now be easily removed because the screw will no longer hold it in place. Next, you will need to determine the size replacement cylinder you require. There are approximately 25 sizes available. You should bring your previous cylinder when you buy the new one to make sure it fits.
If you're not sure of the dimensions then measure from the center of the screw hole to the top of the cylinder. This is the only way to be certain you're getting the right size cylinder for your upvc doors.
Once you have the replacement cylinder ready, insert it into your door in reverse order to the way you removed the old one. It might be tricky to align the lock cam but it is usually an issue of alignment and will eventually be sorted out.
The next step is to insert the long screws for securing. After that, you are able to test it to ensure that the cylinder is secured inside the door. You can now attach the handle back to the door and test it again. If everything is working properly your cylinder lock on your door made of upvc has been replaced and has added a layer of security for your home.
Change the handle
There are many reasons why a door knob or handle could become loose. This could be due to wear and tear of the handle itself or it can be caused by the square spindle inside the handle becoming worn out or damaged by the force or use. In this scenario the door handle has to be replaced.
It is important that the door is opened so that it will not close between taking the handle off and replacing it. Remove the screws from the inside surface of the handle plate using a screwdriver. This will free your handle from the plate. Be careful not to loose the screws as they'll need to be re-screwed back into place later.
After the handles have been removed, you can now access the cylinder lock within the door. The cylinder lock will be round or bulb-shaped and is only used in multi-point locks on upvc as well as some aluminum doors. The procedure for changing the cylinder is similar to the process of changing the handle, however, you'll have to remove the old cylinder from the door and replace it with a new one.
It is important to consider the size of a replacement handle when selecting one. The handle must be the same size as the original since it will need to be able to fit the existing screws holding the handle in place. The best place to begin is to refer to the size matrix that will provide the standard sizes of replacement handles, as well as their keyhole center to handle plate distance.
It is also worth changing your handles for your Upvc doors to more secure standards, like a Sold Secure SS301 or a 2* Kitemark set of security handles. upvc window locks repair Repair My Windows And Doors will improve the security of your home as well as making it easier to operate the door. The cost of these sets will be slightly more expensive but the extra security and peace of mind security is well worth the cost. Having to constantly push the door handle upwards and downwards to open and shut it is not something you would like to be doing.
Change the Lock
The security lock on your uPVC door could be a vulnerable point for burglars. You may want to upgrade your uPVC door with a multipoint lock to increase the security. This would include an open hook as well as deadbolts to ward off burglars. A professional locksmith can help you with this, however it is also possible to complete the work yourself. The process is fast and easy. You'll need just a few tools.
The first step is loosening the screws that hold in the handle. You can take the screws off using the help of a screwdriver, and then store them in a secure place. You can then raise the handle to reveal the screw that is holding the cylinder. You can unscrew this screw and replace it an alternative. Make sure that the screw is of the same size as your original. It must be aligned correctly with the barrel of the lock.
Changing the lock on your door made of uPVC can appear daunting. It is vital to the security of your home. If you make a mistake, it could make it impossible to unlock the door. If you know how, it is relatively easy and costs less than contacting an expert locksmith.
To change the lock on your uPVC door, you will have to open the inner faceplate of the lock. You'll need to locate the screws inside the door and the bolt that holds it outside the door. Once you have these screws in your hands, you are able to remove and replace the faceplate.
There are several reasons why you might need to change the lock on your uPVC doors. It could be because you lost your key, or a tenant moved out and did not return keys, or you simply need to improve the security of your home.
The process of changing a uPVC lock could be accomplished by anyone with basic DIY skills. If the lock is stuck, you will need to check the hinges within the mechanism. If the hinges have been lubricated it is a simple repair. If you're not confident doing this, it is best to consult a professional.