Quick Hacks to Fix Car Dents

Owning cars provides several conveniences, especially to those who stay in remote areas. However, cars also require proper maintenance and repair to ensure their good performance. It is always too annoying to find a dent in your car caused by a shopping cart, debris, hailstorm, or an inattentive driver. However, if the dents from such incidents are minor and haven't caused damage to the paint, you can consider fixing it at your home. If the damage is severe and not fixable via DIY, consider contacting the best paintless dent repair flushing in garden city.

There are mainly two types of dents that you may encounter: plastic dents and metal dents. If you get small and large dents in plastic and metal, you can consider trying these methods.

Fixing Small Plastic Dents 

1. Firstly, heat the damaged area using the blow dryer or heat gun. 

2. Once it becomes warm, use the compressed air on the dent, cool down the area with ultra-cool air.

3. After a while, the dent will regain its shape. Now, you might require a suction dent puller for it.

4. If you cannot fix the dent, you must look for a professional in dent repair garden city Brooklyn.         

Fixing Large Plastic Dents  

1. To fix the large plastic dents, use the blow dryer to heat the dent.

2. As soon as the area becomes warm, now use a suction dent puller.

3. Use the suction dent puller to pull out the dent.

4. You might need to repeat heating to get the dented area back into shape. 

Fixing Small Metal Dents

1. Use a microfiber towel to clean the area to ensure no atmospheric aerosol particles cause damage to the paint.

2. With the provided glue gun from the dent repair kit, heat the glue and apply about a tablespoon to two tablespoons of glue to the deepest point of the dent. 

3. Now, use the glue gun and apply about a tablespoon to two tablespoons of glue on the dented area.

4. Now, connect the bridge puller head to the glue and let it dry for about 4-8 minutes.

5. After this process, connect the bridge puller and turn the dial to pull out the dent.

6. Once the dent is removed, detach the bridge puller and remove the remaining gun with the help of a heat gun. If still not able to fix contact an excellent paintless dent repair flushing in garden city 

Fixing Large Metal Dents

 1. Use the heat gun and blow dryer to heat the dent.

2. Once it becomes warm, now connect the suction dent puller.

3. Now, use the puller's handle to pull out the dent.

4. Once the size of the dent becomes small, switch to the bridge puller.

5. Now clean the dented area using a microfiber towel to avoid any damage to the paint by particulates. 

7. Now, apply one tablespoon to two tablespoons of glue on the deepest point of the damaged area.

8. Now, attach the bridge puller head to the glue and wait for 4-8 minutes to let it dry.

9. Once the area gets dried, attach the bridge puller and turn the dial to pull out the dent.

10. Once the dent is fixed, carefully detach the bridge and clean the leftover glue with the help of a heat gun.

11. If you're still unsure how to fix a dent and still can't fix it, a professional technician in dent repair garden city, Brooklyn, can be happy to help restore your car.