Motionprotect Outdoor

Motionprotect Outdoor
© 2022 AJAX SYSTEMS CH. All rights reserved
We’re responding to your inquiries 24/7
Ajax security systems provide security for more than 100,000 people increasing the chances of saving money, property, health, and even life. We have created a comprehensive solution for indoor security; Ajax is the most titled security system in Europe today. We are ready to move beyond the premises now and to ensure the consistently high quality protection of the adjacent areas.
The new range of Ajax outdoor security devices is represented by MotionProtect Outdoor — a motion detector with a two-phase algorithm for protection against false triggering, pet immunity, and an advanced anti-masking system. The most reliable solution for professional monitoring of areas.
The security market in Western Europe differs significantly from that in Eastern Europe — a significant part of the population lives in private houses and townhouses. Traditionally, the development of a security system starts with the adjacent territory: in order to frighten off the robbers with sirens upon approaching the house, protect the property located on the territory, and provide the residents with a few valuable minutes in case of a night invasion. The lack of outdoor security devices in the Ajax range was a major obstacle to full-scale expansion in the region.
We responded quickly by releasing the integration module Transmitter . It enabled the connection of the Ajax via the Jeweller radio technology to the third-party wired detectors, including outdoor ones. The module, albeit provisionally, solved the problem, and its sales confirmed the demand for the outdoor protection function in the Ajax security systems.
However, the beginning of the development process was preceded by another stage. We asked the security market professionals and found out how they see the perfect outdoor motion detector. Everyone said that the operation accuracy was the first priority. Even the best devices of this class had false triggering resulting in futile rides of police and rapid response teams as well as wasted nerves of the residents. The problem is so serious that some security companies refuse to connect outdoor detectors to the Central Monitoring Stations unless there is also a video surveillance system to determine the cause of the alarm.
We have perceived the situation as a challenge and formed a list of requirements for MotionProtect Outdoor:
We have made prototypes of outdoor detectors with different types of echelon lenses and motion detection systems with one or two IR sensors and an auxiliary microwave sensor. We have equipped the devices with video cameras and placed them in different climatic conditions in the characteristic locations: residential area of the city, industrial zone, and suburban area.
Thanks to the MotionProtect series of detectors, we discovered the typical interferences in the rooms and were able to successfully filter them with the SmartDetect digital algorithm: sun glints, streams of hot air, and pets. However, there are many times more potential causes of false triggering outdoor. Leaves of trees and plants heated by the sun, birds flying through the field of view of the detector, insects, that sit on the lenses, pets strolling through the area, the scorching sun, unpredictable gusts of wind do not represent a complete list of events that can confuse an ordinary outdoor motion detector. We have collected a huge array of data whose careful analysis allowed us to determine the specifics of the signal for all typical outdoor events.
Prototype tests gave a decisive answer to the question regarding the motion detection system that should be used in MotionProtect Outdoor. Despite the popularity of outdoor detectors with IR and microwave sensors, this solution did not suit us. The microwave sensor effectively insures against false alarms at a distance of up to 8 meters. This is the critical distance, which provides a sufficiently characteristic signal reflected from a moving person to distinguish it from natural interference signals. In addition, the motion detection range could be adjusted only by changing the installation height or tilt of the device, which compromises the quality of operation or completely deprives the detector of pet ignoring function.
A system of two IR sensors was the most effective one for MotionProtect Outdoor.
Due to different directivity of the lenses, the detector receives enough information about what is happening in the field of view to screen out 100% of false alarms during the analysis and not to react even to large pets with height up to 80 cm. The variable viewing angle of the lower lens allows one to set the motion detection range within 3~15 meters.
A person crossed the beams of both detectors — an alarm
A person crosses the beams of the upper detector (located outside the detection area) only — the event is ignored
The dog crosses only the beams of the lower detector — the event is ignored
Most motion detectors with IR sensors count pulses, which is a simple method: a dozen of pulses raise an alarm. However, this method is unreliable since completely different events can trigger similar signals under certain conditions.
We have used a more sophisticated signal analysis system.
1. MotionProtect Outdoor raises the alarm only if both sensors react to the movement — this is the first stage of protections against false alarms.
2. The signals of two sensors are analysed by the SmartDetect algorithm modified with allowance for the specifics of outdoor interferences, and then the waveforms are compared. At this stage, the MotionProtect Outdoor determines a person in a 100% of events and the probability of false triggering is relatively low. This is the second stage of protection and we could stop at that, but we needed absolute reliability.
3. The spectral analysis was the third barrier. The algorithm for comparing the frequency components of the signals of two sensors is unique for security devices — this is the know-how of the Ajax Systems that guarantees 100% accuracy of MotionProtect Outdoor. It is inexpedient to start the process after every motion detection since complex calculations would reduce the detector battery life to 2 years. Therefore, we connect it only if we are not completely confident in the cause of triggering during the analysis of the similarity of signals.
An unparalleled two-phase algorithm that detects a person from the first step does not give false triggering and provides the battery life of up to 5 years for the outdoor motion detector from two bundled batteries, was named LISA: Live Intelligent Spectrum Analysis.
Having solved the problem of the motion detection system accuracy, we concentrated on the MotionProtect Outdoor body. An outdoor installation significantly increases the possibility of sabotage: a disarmed device can be covered with a cloth, lenses can be glued or painted. Moreover, an intruder can try to detach it from the mounts, open and damage the electronic components or simply break it with something heavy. A reliable sensor must either deal with the threat or report the problem to the users and the security company.
The MotionProtect Outdoor body is made of durable plastic and is equipped with a tamper that detects the opening or attempt to detach it from the SmartBracket mounting panel.
The anti-masking protection system (attempts to block the view of the detector) includes three special detectors and an algorithm analysing their signals. It will record and trigger an alarm in all typical cases of masking in just seconds:
And to ensure maximum reliability, we’ve developed a special visor— Hood for MotionProtect Outdoor —which protects masking sensors from rain and snow.
The MotionProtect Outdoor anti-masking system conforms to Grade 3 security standard EN 50131 : “ready to confront intruders with professional skills and knowledge”.
In addition, MotionProtect Outdoor has rain and dust protection (IP55), can operate in humidity conditions reaching 100% at temperatures from -25°C to +60°C. Since the capacity of lithium batteries and, consequently, detector independence are significantly reduced during severe cold conditions, we have provided for the feasibility of connecting an external 5~28 V power source.
The wireless performance of MotionProtect Outdoor is also at a decent level — the Jeweller radio technology allows the hub to maintain two-way communication with the detector at distance up to 1,700 meters; alarms are transferred in 0.15 seconds.
MotionProtect Outdoor motion detectors have been successfully tested in different climatic conditions, ensuring the safety of sites in Ukraine, Malaysia, Finland, the Netherlands, Denmark, Italy, Spain, Greece, and the Balkans.
You can order MotionProtect Outdoor detectors from the Ajax Systems partners right now.
Subscribe to our emails about secure life. No spam.
Adjustable, 3 – 15 m when the detector is installed at 1 m height
Available, height up to 80 cm when the detector is installed at 1 m height
Up to 1,700 m (where there are no obstacles)
868.0 – 868.6 MHz or 868.7 – 869.2 MHz, depending on the sales region
Up to 5 years on 2 CR123A batteries

Is it possible to disable the security detector indication?
Is it possible to temporarily deactivate the detector/device without removing it from the system
What does the Hood for MotionProtect Outdoor protect from and when should I use it?
How to install Hood for MotionProtect Outdoor on outdoor motion detector?
The detectors are installed in the same room at a close distance, but all show different temperatures
Adding a detector to the app fails because the device doesn’t have a QR code
Why the detector has no connection with the hub at a distance of 100 meters (through walls) if the manual states 2,000 meters
How can I check if the detector is functioning correctly after installation?
Why is the detector triggered when the system is not armed
How long will it take the hub to detect a communication failure with a detector or device
How can the loop (zone) number of the detector or Ajax device be determined
How to find out the device firmware version
What is Delay When Entering/Leaving
How to set up the Always active operation mode
How do I check device status and settings?
Subscribe to the newsletter about safe life. No spam
All right! Please check your email to confirm your subscription

Get started

Select set
Security Comparison
How it works
Why Ajax

support@ajax.systems

@AjaxSystemsSupport_Bot

Please fill the form and we will answer as soon as possible.

Privacy policy
End user agreement
Warranty

© 2022 Ajax Systems CH. All rights reserved
We’re responding to your inquiries 24/7
We’re responding to your inquiries 24/7
Wireless outdoor motion detector with anti-masking and pet immunity
The identifier (ID) is the serial number of the device. It is located under the QR code on the body, board, and packaging of the device.
The ID can also be found in the device states in the Ajax app.
The alarm indication can be disabled in the device settings. Available for the following detectors:
With OS Malevich 2.9 update, temporary deactivation of devices without removing them from the system has become available.
Deactivation may be necessary if the device is incorrectly installed or configured, loses connection with the hub, or has failed.
To temporarily deactivate a device, in the Ajax app:
Hood for MotionProtect Outdoor is a cover protecting masking sensors of the detector MotionProtect Outdoor from rain and snow. Install it when the detector cannot be placed under the covering.
Hood for MotionProtect Outdoor can be mounted even on a detector that is already installed. You don’t need to detach the device from the surface for installing the hood.
To install Hood for MotionProtect Outdoor:
Tamper is a miniature button on the device board. It reports an alarm in case of opening the device enclosure, removing the device from the mounting panel, or detaching it from the surface.
The tamper status is displayed in Ajax apps , in the Enclosure section in the states of each device. When the body status is Open , a fault symbol appears on the device icon.
The temperature is measured by sensors inside each detector, which can heat up differently due to the circulation of air currents in the room. The value may differ from the ambient temperature by 2°C.
The temperature displayed in the Rooms tab is the average of these temperatures for each detector assigned to the room.
On some devices, the QR code is located under the SmartBracket mounting panel. To add a detector, remove the mounting panel and scan the QR code.
Also, the QR code is located on the packaging and the device board inside the body.
The maximum distance between the hub and the device can reach 2,000 meters in an open space.
Walls, ceilings, and other structures that interfere with the radio signal to get through can significantly reduce the range. In this case, maximum distance mainly depends on the structures’ material, thickness, and arrangement.
You can expand the coverage area of Ajax security systems with the help of radio signal range extenders
To check that the device is operating correctly, carry out the detection area and signal strength tests.
The detection area tests allow you to determine the distance at which the detector will detect alarms and protect it from false triggering. In test mode, the LED indicator lights up continuously, switching off during the alarm. In order to determine the detection area, use the device’s LED indicator as a guide.
The Jeweller signal strength test allows to determine signal strength and stability in the potential installation place of the device.
Check the Always active mode in the detector settings and disable it if not needed.
When the Always active mode is enabled, the detector is constantly armed and detects movement, activating an alarm. The option is useful, for example, if the facility or specific room needs the 24/7 security.
By default, the hub is set to a hub–detector ping interval of 36 seconds and 30 undeliverable data packets to consider the device lost. With these settings, the hub will detect the loss of the detector in 18 minutes.
To reduce this time, go to the hub settings in the Jeweller section and change the settings. The minimum time for detecting loss of connection with the device is 36 seconds (3 polls of 12 seconds each).
The time before raising the alarm by the communication loss between hub and device is calculated with the following formula:
Detector Ping Interval × Number of missed pings to determine connection failure
Note that with the minimum ping interval, short-term interference can lead to loss of connection with the device. Therefore, set the minimum values only if it is critically important to promptly inform about events in the system.
The loop (zone) number is required to describe all devices connected to the hub when adding a protected facility to the security company monitoring station.
The number is assigned when adding a device to the hub. The first added device has the first loop (zone) number. After removing the device from the system, its number becomes available. This number can be assigned to the next device to be added to the system.
The loop (zone) number is available in the states of each device in the Ajax app:
The firmware version can be found in the device states in the Ajax app.
Delay When Entering/Leaving is the time the user has to disarm the security system after entering/leaving the protected area.
The function can be configured for all security detectors and sirens of the Ajax security system. Also, the delay can be separately configured for Night mode .
When the Always active mode is enabled, the detector is constantly armed and detects movement, activating an alarm.
To enable the Always Active mode, in the Ajax app:
Go to the Device tab , select the device you want to check.

Home
Catalogue

Products

Access Control

Loxal

Rapid Deployment

webeyego
Videofied

Outdoor
Indoor
Sirens
Speakers
Antennas
Batteries

OCULi

CCTV

EZVIZ
Hikvision

Deep in Mind

Routers

CSL

FOG Deterrent

webeyefog

Residential

AJAX
EZVIZ

Detection

GJD

Lighting

Offers

Bundles
Clearance

My account

Account details
Log in

Create Account

Search for:

If you would like to see our prices, please log in. If you do not have an account, you can register here.

SKU AJAX W MOTION OUTDOOR

Category Ajax

Wireless outdoor motion detector with anti-masking, pet immune and intelligent protection against false alarms. The device operates at low temperatures and is protected against dust and splashes.
Electro-optical Radio Channel Security Detector
Weight — not relevant, Height — up to 80 cm
Power supply: 2 x CR123A battery, Power supply voltage: 3V, Battery life — up to 5 years, Mains supply: 5 – 28VDC
Grade 3 Anti-masking Protection Against Fraud Jamming Detection Tamper-resistant
We lead the way as a supplier of quality equipment to security professionals. But we don’t just sell stuff – We also develop technology to enhance security.
© 2011 – 2022 Webeye Limited. All rights reserved. Authorised and regulated by the Financial Conduct Authority. Registered Number: 06812615
Webeye Limited Innovation House Kestral Road Mansfield Nottinghamshire NG18 5FT
WebeyeCMS Corporation 450 E. HWY 50 Suite 6 Clermont FL 34711
Webeye South Africa 16 Pieter Street Manhattan Office Park Unit 8 Eco Park Centurion

Brazzers Lingerie
Video And Photo Nudists
Naked Mother

Motionprotect Outdoor

Report Page