Major 5 What you should Be aware of Submersible Water Pumps in addition to Electricity.
Despite their ground-ready, durable and insulated construction, submersible water pumps still present severe hazards for homeowners and shouldn't be utilized in ponds designed for swimming or human immersion. The thing is simple: electricity and water do not mix. As such, installing a power submersible water pump for water gardens, natural ponds, or pools requires great skill and experience in order to avoid electrocution.
Manufacturers design submersible pumps to be safe. As an example, they encase them in cast-iron housing made to isolate the electrical and working areas of the unit. All cables are shielded and sealed by standard rubber. However, both the casing and the rubber shielding does not guarantee that the submersible water pump won't have any connection with water.
Water Seals
The rubber water seals on a submersible pump contain no adhesive. Instead, they form the seal due to a crimping method that tightens components within the pump. The seal insulates the within of the pump from water, humidity, and outside air.
While this produces a higher level of insulation, occasional seal failures can occur. A tiny malfunction may bring the within of the pump into connection with the water garden or natural pond water. The result of this malfunction would be electrified water inside the pond Get details.
The Cables
Such as the primary ingredients of the pump, manufacturers visit great lengths to properly seal the cables. As an example, they'll fill gaps with epoxy to stop water from invading the unit. Additionally they wrap the cables in a neoprene, which is both air and watertight.
Epoxy is incredibly with the capacity of forming a waterproof seal. This seal will not fail unless it's afflicted by some form of impact that would cause it to crack. If the seal cracks, water might get into the cable. The exact same holds true for neoprene.
Regular Outlets vs. GFCI Receptacles
The National Electric Code (NEC) and OSHA require that homes now contain GFCI receptacles in areas where water exists or potentially exists. These areas include bathrooms, kitchens, utility rooms, garages, and anywhere outside. GFCI receptacles prevent electrocution by cutting off the ability source when an unusual increase or “leakage” in power, that way caused when water makes connection with electricity, is detected.
Unfortunately, many older homes do not need GFCI receptacles. As a result, plugging a power water pump into a regular outlet may make it at risk of an electric surge. Additionally, it may increase the risk of electric shock. Therefore, if you use a power pump, you must ensure that you plug it into a GFCI receptacle or replace your old outlet.
Freezing Temperatures During the Winter
During the winter, it's a good idea to get rid of the water pump from your own water garden or natural pond. Winters in Illinois produce frigid temperatures that will plummet below zero. As a result, the water in a natural pond or water garden may stay frozen through the entire season.
Frozen water will take its toll on a submersible water pump. Just one freeze can cause the casing or the cabling to crack open, exposing the electrical parts. You might not notice the cracks due to the multilayers of the casing. Therefore, whenever you turn on the pump in the springtime, you might be at risk of electric shock.
Abrasives and Heavy Objects
Since easiest ponds or water gardens contain rocks, plants, sand, and other objects, it is very important to ensure they do not come into connection with the water pump.
When placing your pump, make sure you isolate it from any heavy rocks, sharp objects, or metal objects. Also, if you use sand, position the pump so that it is filtering the least amount of sand possible. Since sand is abrasive, it can damage the inner areas of the pump over time.
Never swim or wade in a pond with a Submersible Water Pump
You should never swim or wade in a pond or pool with a submersible water pump. Although these pumps were created with many safety features, it's not worth the risk. There are special pumps created for swimming pools and ponds that not carry this risk. If you want to enter your pond or pools with a submersible water pump to retrieve something or perform routine maintenance it is crucial that you switch off the electricity to the submersible pump and enter with caution.
Need Assistance with Your Water Garden? Contact Us Today!
If you're getting ready to construct your water garden project, then Reflections can help. We give you a wide range of features and options to assist you create an ideal serene water garden for your backyard.