Котел Бош 6000 Слить Воду В Telegram
Котел Бош 6000 Слить Воду В Telegram
Переходите в наш Telegram канал!
👇👇👇👇👇👇👇
👉 https://t.me/ezItsSF4EWIFNEZ8qD
👉 https://t.me/ezItsSF4EWIFNEZ8qD
👉 https://t.me/ezItsSF4EWIFNEZ8qD
👉 https://t.me/ezItsSF4EWIFNEZ8qD
👉 https://t.me/ezItsSF4EWIFNEZ8qD
Title: Котел Бош 6000: Способ слить воду в Telegram
If you own a Bosch 6000 dishwasher and are looking for a way to send notifications about its water level or error messages to Telegram, this article is for you. In this guide, we'll walk you through the process of connecting your Bosch dishwasher to Telegram using a Raspberry Pi and a few open-source tools.
Before we start, please note that this method requires some technical knowledge and experience in setting up a Raspberry Pi and configuring its software. If you're not comfortable with these steps, you may want to seek help from a professional or a knowledgeable friend.
Tools and Components:
- Raspberry Pi 3 or newer model
- Power supply for Raspberry Pi
- MicroSD card with Raspbian OS installed
- Ethernet cable or Wi-Fi adapter
- Bosch dishwasher with a fault code display
- USB-RS232 adapter
- Jumper wires
- A few resistors
- Telegram account
Steps:
1. Install Raspbian OS on your Raspberry Pi. You can follow the official Raspberry Pi documentation for installation instructions.
2. Install necessary software. Open a terminal window and run the following commands to update your Raspbian OS and install the required packages:
```
sudo apt-get update
sudo apt-get upgrade
sudo apt-get install python3 python3-pip python3-dev libreadline-dev libffi-dev wiringpi libwiringpi-dev
```
3. Connect the USB-RS232 adapter to the Raspberry Pi and configure it using WiringPi. Run the following commands to install WiringPi and configure the USB-RS232 adapter:
```
git clone git://github.com/WiringPi/WiringPi.git
cd WiringPi
make
sudo make install
sudo wiringpi --install
sudo grep -q /dev/ttyAMA0 /proc/devices || sudo echo "108 0 >/sys/class/tty/ttyS0/device/rescan"
sudo echo "108 0 >/sys/class/tty/ttyS1/device/rescan"
sudo chmod 666 /dev/ttyAMA0
```
Replace "/dev/ttyAMA0" with the appropriate device name if your setup uses a different device.
4. Write a Python script to read data from the Bosch dishwasher. Create a new file called "bosch_dishwasher.py" and add the following code:
```python
import time
import wiringpi as wiringpi
import serial
ser = serial.Serial('/dev/ttyAMA0', 9600)
def read_code():
while ser.isOpen():
line = ser.readline().decode('utf-8').strip()
if len(line) > 0:
print(line)
break
def main():
wiringpi.wiringPiSetupGpio()
gpio_pin_rx = 17
gpio_pin_tx = 18
wiringpi.pinMode(gpio_pin_rx, wiringpi.INPUT)
wiringpi.pinMode(gpio_pin_tx, wiringpi.OUTPUT)
wiringpi.pullUpDnControl(gpio_pin_rx, wiringpi.PUD_UP)
print('Press RX button to read dishwasher code')
wiringpi.digitalWrite(gpio_pin_tx, 1)
while True:
if wiringpi.digitalRead(gpio_pin_rx) == 0:
read_code()
break
if __name__ == '__main__':
main()
```
Replace the RX and TX pins in the script with the appropriate pins for your setup.
5. Modify the script to send notifications to Telegram. Create a new file called "telegram_notifier.py" and add the following code:
```python
import logging
import logging.config
import os
import sys
import telegram
from bosch_dishwasher import read_code
logging.config.fileConfig('logging.conf')
def send_message(bot_token, chat_id, message):
bot = telegram.Bot(token=bot_token)
bot.send_message(chat_id=chat_id, text=message)
def main():
logging.info('Starting the script')
try:
code = read_code()
message = f'Dishwasher code: {code}'
send_message('YOUR_BOT_TOKEN', 'YOUR_CHAT_ID', message)
logging.info(f'Sent message: {message}')
except KeyboardInterrupt:
logging.info('Stopping the script')
if __name__ == '__main__':
main()
```
Replace "YOUR_BOT_TOKEN" and "YOUR_CHAT_ID" with your Telegram bot token and chat ID.
6. Create a "logging.conf" file with the following content:
```conf
[loggers]
keys = root, main
[handlers]
keys = console
[formatters]
keys = simple
[logger_root]
level = INFO
handlers = console
[logger_main]
level = INFO
handlers = console
[handler_console]
class = StreamHandler
formatter = simple
level = INFO
stream = ext://sys.stdout
[formatter_simple]
format = %(asctime)s %(levelname)s %(message)s
```
7. Install the Telegram library. Run the following command in the terminal:
```
pip3 install python-telegram-bot
```
8. Combine the scripts. Create a new file called "dishwasher_telegram.py" and add the following code:
```python
import sys
import time
import wiringpi as wiringpi
import serial
import telegram
from bosch_dishwasher import read_code
from telegram_notifier import send_message, main as telegram_main
def main():
try:
wiringpi.wiringPiSetupGpio()
gpio_pin_rx = 17
gpio_pin_tx = 18
wiringpi.pinMode(gpio_pin_rx, wiringpi.INPUT)
wiringpi.pinMode(gpio_pin_tx, wiringpi.OUTPUT)
wiringpi.pullUpDnControl(gpio_pin_rx, wiringpi.PUD_UP)
print('Press RX button to read dishwasher code')
wiringpi.digitalWrite(gpio_pin_tx, 1)
while True:
if wiringpi.digitalRead(gpio_pin_rx) == 0:
code = read_code()
send_message('YOUR_BOT_TOKEN', 'YOUR_CHAT_ID', f'Dishwasher code: {code}')
telegram_main()
break
except KeyboardInterrupt:
logging.info('Stopping the script')
sys.exit()
if __name__ == '__main__':
main()
```
Replace "YOUR_BOT_TOKEN" and "YOUR_CHAT_ID" with your Telegram bot token and chat ID.
9. Run the script. Start the script with the following command:
```
python3 dishwasher_telegram.py
```
Now, whenever you press the RX button on the Bosch dishwasher, the script will read the fault code and send a notification to your Telegram chat.
Please note that this method is not officially supported by Bosch or Telegram, and it might not work with all models of Bosch dishwashers. It is recommended to consult the Bosch documentation and seek professional advice before attempting this setup.
Порно Сливы Тг Школьницы 14 В Telegram
Голая Девочка Из Дискорда Слив В Telegram
Сливают Сперму Русских Мужиков В Telegram