Issue 62 (October 2022) - Online first
Francesco Iacoviello
TOC
- Elastic and nonlinear crack tip solutions comparison with respect to failure probability (Valery Shlyannikov, Andrey Tumanov , Nataliya Boychenko)
- Effect of parent concrete strength on recycled concrete performance (Bachir Kebaili, Mohammed Benzerara, Souad Menadi, Nadia Kouider, Redjem Belouettar)
- Numerical investigation on strengthening steel beams with web openings using GFRP (Hamda Guedaoura, Yazid Hadidane, Mohammed J Altaee)
- Investigation of the Effect of Yarn Waste Fibers and Cocamide Diethanolamide Chemical on the Strength of Hot Mix Asphalt (Mehmet Saltan, Gizem Kaçaroğlu, Öznur Karadağ)
- Corrosion behavior of Shape Memory Alloy in NaCl environment and deformation recovery maintenance in Cu-Zn-Al system (A. Brotzu, B. De Filippo, S. Natali, L. Zortea)
- Damage assessment of different FDM-processed materials adopting Infrared Thermography (D. D’Andrea, G. Risitano, M. Raffaele, F. Cucinotta, D. Santonocito)
- Numerical study of the plasticity effect on the behavior of short steel columns filled with concrete loaded axially (Y. Boulmaali-Hacene Chaouche, N. Kouider, K. Djeghaba, B. Kebaili)
- Experimental and numerical investigation of gap K-joints of rectangular hollow section trusses (F. Slimani, M. Benzerara, M. Saidani)
- Impact behaviour and fractography of 6061 alloy with trace addition of Sn (M. Baruah, A. Borah)
- Fabrication, mechanical and wear properties of Aluminum (Al6061)-silicon carbide-graphite Hybrid Metal Matrix Composites (G.B. Veeresh Kumar, P. S. Shivakumar Gouda, R. Pramod, N.D. Prasanna, H.S. Balasubramanya, S.M. Aradhya)
- Predicting fatigue crack growth behavior of coalesced cracks using the global-local superimposed technique (M. S. Shaari, S. D. Urai, A. Takahashi, M. A. M. Romlay)
- Mechanical Behaviour and Fractured Surface Analysis of Bauxite Residue and Graphite Reinforced Aluminium Hybrid Composites (K. C. Anil, J. Kumaraswamy, Mahadeva Reddy, Bhograj Prakash)
- Influence of additional static stresses on biaxial low-cycle fatigue of 2024 aluminum alloy (A.S. Yankin, A.V. Lykova, A.I. Mugatarov, V.E. Wildemann, A.V. Ilinykh)
- Microstructure characterization of sustainable light weight concrete using trapped air additions (A. A. Maaty, F. M. Kamel, A.A. ELShami)
- Effect of Ti addition and cast part size on solidification structure and mechanical properties of medium carbon, low alloy cast steel (N. E. Tenaglia, D. O. Fernandino, A. D. Basso)
- Influence of hBN and MoS2 fillers on toughness and thermal stability of carbon fabric-epoxy composites (Y. S. Rao, B. Shivamurthy, N. S. Mohan, N. Shetty)
- Numerical simulation of creep notched bar of P91 steel (N. Ab Razak, C. M. Davies)
- Evaluation on fatigue behaviour of spot-welded joint under low blow impact treatment (M. M. Pazdi, F. A. Ghazali)
- High-quality nodule analysis in spheroidal graphite cast iron using X-ray micro-computed tomography (J. C. Toledo, F. V. Díaz, M.E. Peralta, D. O. Fernandino)
- Multiple linear regression parameters for determining fatigue-based entropy characterisation of magnesium alloy (M.A. Fauthan, S. Abdullah, M.F. Abdullah, I.F. Mohamed)
- Use of combined CZM and XFEM techniques for the patch shape performance analysis on the behavior of a 2024-T3 Aluminum structure reinforced with a composite patch (D. C. Safa, N. Kaddouri, M. ElAjrami, M. Belhouari, K. Madani)
- Mechanical properties and statistical analysis of the Charpy impact test using the Weibull distribution in jute-polyester and glass-polyester composites (T. Tahar, D. Djeghader, B. Redjel)
- On the use of the stepped isostress method in the prediction of creep behavior of polyamide 6 (T. Mohsein, S. Lakhdar, G. Belhi, K. Meftah)
- Beam-like damage detection methodology using wavelet damage ratio and additional roving mass (J. C. Santos, M. V. G. de Morais, M. R. Machado, R. Silva , E. U. L. Palechor , W. V. Silva)
- Seismic vulnerability analysis of reinforced concrete frame with infill walls considering in-plane and out-of-plane interactions (D. Wang)
- Synthesis, microstructural characterization, mechanical, fractographic and wear behavior of micro B4C particles reinforced Al2618 alloy aerospace composites (G. Veeresha, B. Manjunatha, V. Bharath, M. Nagaral, V. Auradi)
- Experimentally evaluation of high-performance concrete mixes used for tunnels and containing silica fume and polypropylene fiber after exposed to high temperatures (S. S. E. Ahmad, M. M. Elmesiri, M. Fawzy Ahmed, M. Bneni, A.A. ELShami)
- Mechanical characterization and analysis of tensile fracture modes of ultrasonically stir cast Al6082 composites reinforced with Cu powder premixed Metakaolin particles (R. J. Bright, P. Hariharasakthisudhan)
- Impact of nano sized SiC and Gr on mechanical properties of aerospace grade Al7075 composites (M. Ravikumar, R. Naik)
- Optimization of the tensile strength of friction stir welded heat treatable aluminum alloy by using bio-inspired artificial intelligence algorithms (A. Mishra, A. Dasgupta)
- The application of PSO in structural damage detection: an analysis of the previously released publications (2005–2020) (P. Ghannadi, S. S. Kourehli, S. Mirjalili)
- Compressive behavior of Co-Cr-Mo radially graded porous structures under as-built and heat-treated conditions (F. Cantaboni, P. S. Ginestra, M. Tocci, A. Avanzini, E. Ceretti, A. Pola)
Elastic and nonlinear crack tip solutions comparison with respect to failure probability
Valery Shlyannikov, Andrey Tumanov , Nataliya Boychenko
Effect of parent concrete strength on recycled concrete performance
Bachir Kebaili, Mohammed Benzerara, Souad Menadi, Nadia Kouider, Redjem Belouettar
Numerical investigation on strengthening steel beams with web openings using GFRP
Hamda Guedaoura, Yazid Hadidane, Mohammed J Altaee
Investigation of the Effect of Yarn Waste Fibers and Cocamide Diethanolamide Chemical on the Strength of Hot Mix Asphalt
Mehmet Saltan, Gizem Kaçaroğlu, Öznur Karadağ
Corrosion behavior of Shape Memory Alloy in NaCl environment and deformation recovery maintenance in Cu-Zn-Al system
A. Brotzu, B. De Filippo, S. Natali, L. Zortea
Damage assessment of different FDM-processed materials adopting Infrared Thermography
D. D’Andrea, G. Risitano, M. Raffaele, F. Cucinotta, D. Santonocito
Numerical study of the plasticity effect on the behavior of short steel columns filled with concrete loaded axially
Y. Boulmaali-Hacene Chaouche, N. Kouider, K. Djeghaba, B. Kebaili
Experimental and numerical investigation of gap K-joints of rectangular hollow section trusses
F. Slimani, M. Benzerara, M. Saidani
Impact behaviour and fractography of 6061 alloy with trace addition of Sn
(M. Baruah, A. Borah)
Fabrication, mechanical and wear properties of Aluminum (Al6061)-silicon carbide-graphite Hybrid Metal Matrix Composites
G.B. Veeresh Kumar, P. S. Shivakumar Gouda, R. Pramod, N.D. Prasanna, H.S. Balasubramanya, S.M. Aradhya
Predicting fatigue crack growth behavior of coalesced cracks using the global-local superimposed technique
M. S. Shaari, S. D. Urai, A. Takahashi, M. A. M. Romlay
Mechanical Behaviour and Fractured Surface Analysis of Bauxite Residue and Graphite Reinforced Aluminium Hybrid Composites
K. C. Anil, J. Kumaraswamy, Mahadeva Reddy, Bhograj Prakash
Influence of additional static stresses on biaxial low-cycle fatigue of 2024 aluminum alloy
A.S. Yankin, A.V. Lykova, A.I. Mugatarov, V.E. Wildemann, A.V. Ilinykh
Microstructure characterization of sustainable light weight concrete using trapped air additions
A. A. Maaty, F. M. Kamel, A.A. ELShami
Effect of Ti addition and cast part size on solidification structure and mechanical properties of medium carbon, low alloy cast steel
N. E. Tenaglia, D. O. Fernandino, A. D. Basso
Influence of hBN and MoS2 fillers on toughness and thermal stability of carbon fabric-epoxy composites
Y. S. Rao, B. Shivamurthy, N. S. Mohan, N. Shetty
Numerical simulation of creep notched bar of P91 steel
N. Ab Razak, C. M. Davies
Evaluation on fatigue behaviour of spot-welded joint under low blow impact treatment
M. M. Pazdi, F. A. Ghazali
High-quality nodule analysis in spheroidal graphite cast iron using X-ray micro-computed tomography
J. C. Toledo, F. V. Díaz, M.E. Peralta, D. O. Fernandino
Multiple linear regression parameters for determining fatigue-based entropy characterisation of magnesium alloy
M.A. Fauthan, S. Abdullah, M.F. Abdullah, I.F. Mohamed
Use of combined CZM and XFEM techniques for the patch shape performance analysis on the behavior of a 2024-T3 Aluminum structure reinforced with a composite patch
D. C. Safa, N. Kaddouri, M. ElAjrami, M. Belhouari, K. Madani
Mechanical properties and statistical analysis of the Charpy impact test using the Weibull distribution in jute-polyester and glass-polyester composites
T. Tahar, D. Djeghader, B. Redjel
On the use of the stepped isostress method in the prediction of creep behavior of polyamide 6
T. Mohsein, S. Lakhdar, G. Belhi, K. Meftah
Beam-like damage detection methodology using wavelet damage ratio and additional roving mass
J. C. Santos, M. V. G. de Morais, M. R. Machado, R. Silva , E. U. L. Palechor , W. V. Silva
Seismic vulnerability analysis of reinforced concrete frame with infill walls considering in-plane and out-of-plane interactions
D. Wang
Synthesis, microstructural characterization, mechanical, fractographic and wear behavior of micro B4C particles reinforced Al2618 alloy aerospace composites
G. Veeresha, B. Manjunatha, V. Bharath, M. Nagaral, V. Auradi
Experimentally evaluation of high-performance concrete mixes used for tunnels and containing silica fume and polypropylene fiber after exposed to high temperatures
S. S. E. Ahmad, M. M. Elmesiri, M. Fawzy Ahmed, M. Bneni, A.A. ELShami
Mechanical characterization and analysis of tensile fracture modes of ultrasonically stir cast Al6082 composites reinforced with Cu powder premixed Metakaolin particles
R. J. Bright, P. Hariharasakthisudhan
Impact of nano sized SiC and Gr on mechanical properties of aerospace grade Al7075 composites
M. Ravikumar, R. Naik
Optimization of the tensile strength of friction stir welded heat treatable aluminum alloy by using bio-inspired artificial intelligence algorithms
A. Mishra, A. Dasgupta
The application of PSO in structural damage detection: an analysis of the previously released publications (2005–2020)
P. Ghannadi, S. S. Kourehli, S. Mirjalili
