Instructions for installing firmware via UBT
SlimHouse
1. You need to download the archive with the firmware. You need to make sure that the downloaded firmware is suitable for your device, otherwise the firmware update may lead to dangerous consequences.
2. Unpack the 7z archive. In the resulting directory, you can find the “img” firmware file.
3. Install USB_Burning_Tool. During installation, you must enable additional drivers for Amlogic devices to be installed.
4. Run the program and change the language in the menu to English
5. Open the firmware file (File-Import Image) and click "start".
6. Connect your device to your computer via OTG USB cable. The device will turn on automatically.
7. When the computer detects the device, the flashing will start automatically. If this does not happen, check if the amlogic drivers are installed in the device manager and reinstall them.
8. After flashing the device, you will see the message “result: burning successful”, then click “stop”.
9. Disconnect the device from your computer.
10. Firmware upgrade with data saving
Download USB_Burning_Tool_v2.2.0