INSTALL BETA ONE UI 6 FOLD 5

Before starting, download Samsung drivers from Smart switch

Download Adb Platform tools from here

Download the latest Fw Ins with the initials F946BXXS1AWI4 from here

Unzip the platform-tools folder in C:\ which is your main disk where windows is installed

Download the latest Samfw tool

Download latest odin from here

Download beta 1 from here

Important, remember to disable Windows driver signature otherwise it will not be possible to sideload

STEPS

Enable USB debugging: settings\device info\software information and click 7 times on the Build number, go to developer settings and enable it

Change the CSC by following this guide for changing the CSC to INS

Now put your phone in download mode, with the phone connected to the PC, open the command prompt and type: adb devices and grant communication permissions with your PC, you will see success and the serial code of your device, immediately after type adb reboot download, your phone will go into download mode.

Open Odin downloaded previously and flash WI4 Firmware by placing all the files inside it. (AP\BL\CP\HOME-CSC) Remember to use HOME-CSC so as not to do a complete reset of the smartphone.

I remind you that the beta can only be installed with WI4 FW, don't try with other firmware because the procedure will not be successful.

Once the flash is finished, check that CSC and FW are perfectly aligned by going to Settings/device info software information and check under telephone operator that it is oxm ins and csc INS INS INS EUX EUX if you have no brand or INS INS INS EUX plus the telephone operator or TIM OR VODAFONE if you have a branded one.

Rename the .bin file of the beta downloaded previously to update.zip (WARNING THAT WINDOWS RENAME MANY TIMES TO UPDATE.ZIP.ZIP, check in the file properties that it is only UPDATE.ZIP) and place it in the C:\platform-tools folder previously unpacked and placed in C:\

Now launch command prompt in the adb platform tools folder as administrator, just go to the same folder and in the search bar write CMD and then the enter key, and: Type "adb reboot recovery" WITHOUT THE QUOTES, and run.

The phone will boot into recovery mode.

By navigating with the volume buttons and selecting with the power button, go to "Apply update from ADB" (if you want to force exit this screen, press and hold the Volume Down and Power buttons) or from adb type adb reboot.

Type adb devices, success will appear and then the serial number, as done previously to send it into download mode.

now type adb sideload update.zip and wait for the entire procedure, it takes about 10 minutes.

Once finished, the phone will restart and you will have the ONE UI 6 Android 14 beta installed.

Sorry if I didn't post any images, but Telegraph is acting up and crashing