How to Clear Canon Printer Error

Canon Printer Problem B200 -This is another common issue that Canon printers can encounter. Since I've received many complaints about this error message, I decided that I would include it.

Canon Error B200 usually refers to a problem with the printhead. A message of support code B200 will flash on the control panel. This error is indicated by the blinking of orange and green lights ten times per second.

Our most frequent solution is to turn off the printer and allow it to cool for a few moments. It could be due to foreign debris or paper jam. This is a good solution for many people. You can still try this fix if it doesn't work. This depends on how many Canon cartridges your printer has. It is the number of cartridges that matters most in solving this problem. This solution doesn't indicate which cartridge has a troublesome printhead. This means that you'll need to thoroughly examine the cartridge set in order for it to be resolved. Here is a step-by-step solution.

For Canon Printer with two cartridges:

1. Turn off the printer. Wait until your cartridge carrier is back on the side. If the carriage gets stuck, open the lid and then move it to the side.
2. Turn on the printer.
3. You should remove the cartridges. If there is any dried ink or clogs, check the nozzles.
4. Reinstall the cartridges. It is crucial to replace a cartridge if one of the cartridges is faulty. Ink cartridges (black, colour) can be replaced with a newer or older functioning cartridge.
5. Try again to determine if Error A200 appears.
6. You can continue to exchange until you identify the cartridge that is the problem.
7. Replace the problem cartridge with a different one.
8. Run a test print.

If the problem persists, please call Canon Helpline or a technician to stop further printer damage.

For four colour Ink Canon Printer:

1. You can open the ink cartridge carriage to remove all ink cartridges.
2. You can remove the printhead by carefully lifting the lever on one side of the carriage.
3. Clean the printhead and remove any dried or clogged ink.
4. Reinsert printhead. Reinstall ink carts in their proper positions.
5. Allow the printer to cool completely before you unplug it.
6. Connect the plug to the printer.
7. Check the nozzle and run a cleaning cycle. Canon mx922 error code b200 are usually when the printhead isn't accessible or cleaned.

To avoid further printer damage, you can call Canon Helpline.

Canon printer error B200 can't be resolved. This could suggest that there may have been damaged to the printer's inside. For printer problems that are not covered by your warranty, contact customer services.