How To Beat Your Boss Upvc Replacement Door Handles
UPVC Replacement Door Handles
The handles on your doors are worn out with time and require to be replaced. When replacing them, it is important that the new handles conform to the critical dimensions of the old handle.
The three measurements to be inspected are the top screw's position, lever and key hole dimensions. Refer to the size guide for help with this.
Inline Lever/Lever
A lever door handle is a contemporary handle that can be put in on replacement or new doors. This kind door handle is available in a variety of styles & finishes. A number of manufacturers offer this handle including Avocet, ERA, Fullex, Hoppe, Mila, Millenco & Yale.
Fab and Fix Windsor Inline Sprung Lever Door Handle
The handles made of uPVC/Composite are made from durable materials, and are perfect for doors with multiple points that require a strong design. The handles are inline and operate off the same spindle and screw fixings so they can be easily fitted to new or existing uPVC/Composite doors.
The handle can be placed and angled to suit the needs of all users. The handle has been endurance-tested to 200,000 cycles. This helps ensure that the quality of finish and performance will last for a long time. The sprung lever can be reduced to accommodate the widest range of locks. This is particularly useful for narrower door frames where the cylinder is further back. A lever that is shorter can be used for doors with latches that can be opened by the thumb on the inside.
Lever Pad
A Lever Pad door handle made of upvc operates differently to the lever type handles that are found on the majority of doors. These handles are operated by a single spindle or by two spindles inline or offset. They are usually employed on UPVC double glazed doors and are available in a variety of variations and finishes.
The handles have been tested to at least 200,000 cycles and are available in a variety of finishes like White, Silver, Chrome & Gold. The finish is BS EN 1670 Grade 5 and is resistant to corrosion. This gives the handle a high performance and durability to serve the purpose it was designed for.
All of the UPVC lever pad styles for handles come with screws and a spindle, allowing them to be fitted on a new or existing uPVC door. The 211mm backplate fixing centres permit a bigger size handle that can be beneficial when replacing a damaged or worn multi point door lock mechanism. The handle levers come with a spring, which solves the issue of handles for doors that slide out of their horizontal position when not being used.
It is important to ensure that the PZ dimensions for both the multipoint lock as well as the uPVC doors when choosing a replacement UPVC spindle and handle. This measurement may also be referred to as 'handle centres' or cylinder centres'. door handles repairmywindowsanddoors is important for matching the correct handles.
Once you have the proper PZ size, you'll have to ensure that the lever pads and push pads are in a suitable shape to fit the American with Disabilities Act (ADA) approved handles you need for your doors. These are typically square or round with an internal lever and an external push pad.
The majority of UPVC lever pads we sell are sprung, meaning that they will return to their horizontal position after not in use, instead of hanging out and potentially sticking in the frame. This keeps draughts out of the building. You will also find that the majority of UPVC handle lever pad style handles are handed, allowing you to install them on either side of the door.
Euro Cylinder
Cylinder locks are typically found on uPVC doors, but they can be utilized on other types of doors. The cylinder lock is operated by a key which unlocks the cylinder's casing. This reveals pins that can be aligned to those in the lock, and permit them to turn the revolving camera, thereby opening the door. Euro cylinders are available with up to six pins. External and internal doors require different levels of security.
The choice of cylinder you choose is vital. It depends on the amount of use your doors and handles receive. External doors, for example are required to be fitted with cylinders with greater security, whereas internal doors can be secured with a standard cylinder. Certain cylinders come with extra features that can improve security, like anti drill or anti bump properties.
To make sure that the euro cylinder is the right size for your door, it should be measured correctly. The cylinder needs to be measured from the screw hole in the center to the ends of the cylinder. This includes the thumb turn, should there be one. If you are unable to measure using the lock in its position, you can remove it. A cylinder that is protruding beyond the handle and escutcheon may be vulnerable to attacks such as snapping locks, so it is essential to make sure it's not too long.
Most newer cylinders have been designed with bump and anti-drill features included in their design. They are designed to decrease the risk of attack by forcing the cylinder rotate in a different direction. This can help deflect the attack, and keep your door safe.
There are also cylinders that are designed to withstand snapping. This is a typical attack on cylinders. A specially designed tool is used to break the break line of the lock, and the front of the cylinder is snapped off. This is a much faster and simpler method to gain access than the use of a multipoint locking system. It also leaves less evidence of the break-in which could make it difficult to prove insurance claims.
Spring Cassette
This spring cassette is found within the base plate of your door handle. It offers a spring-loaded solution to help return the multipoint lock handles to their original position after usage. There was a time when these types of handle didn't have a spring built into them, and as a result, they are more likely to slide or drop once the locking mechanism is removed. This simple feature is one of the best ways to correct this, and is an effective way to keep your doors made of upvc from becoming stuck in either closed or open position, since they are not always easy to close manually.
These spring cassettes were designed to be used with a spring multipoint locks. They won't work with handles that aren't sprung, and you will have to cut a hole in your backplate for them to fit. (Please see the image for a technical diagram). They are a replacement for damaged or missing cassettes inside the door handle backplate of various kinds of uPVC doors. They are available as one unit. They come with a square cut out that is able to accommodate an 8mm shaft.
These spring cassettes are a fantastic value-for-money way to fix the problem of handles on your doors sliding. They are simple to put in and will extend the lifespan of your uPVC doors. Please contact our team for more information about our selection of uPVC accessories and spares. We are always happy to offer expert advice and to assist you.