Галерея 2866049
Галерея 2866049
The utility model discloses a drawer type mold, which is characterized by simple structure, lower cost, quick installation, easy debugging and high-precision locating. Concretely, it is comprised of lower die (1) and upper die (2). The lower die (1) includes lower pedestal (3), guide pole (7) on the lower pedestal (3), lower mold (4) and a pair of guide rail (9) vertically set on the lower pedestal (3). In addition, the upper die (2) involves upper pedestal (5), guide hole (8) and upper mold (6) set on the upper pedestal (5) and a pair of guide rail (9) vertically set on the upper pedestal (5). Guide hole (8) matches guide pole (7). Lower mold (4) and upper mold (6) slide along the guide rail (9). The utility model is applicable to die cutting of circuit board.
The utility model relates to a kind of drawer type mould, especially relates to a kind of die-cut mould of circuit board that is used for.
The die-cut technology that is applied to circuit board at present is a lot, has laser cutting, the cutting of gong bed and machinery die-cut.Laser cutting cost height wherein, cutting speed is slow, is not suitable for large-scale production; The cutting of gong bed is fit to the die-cut of a spot of plate, utilizes this method just not need the die sinking tool, but is unsuitable for large-scale sharp processing; Machinery is die-cut can die-cut according to our needs in advance shape fabricating mould, and then install, die-cut, be die-cut mode routine, general that is used for the circuit board punch extermal form.But mechanical general mould when die-cut is installed and is needed manual location mostly, and the adjustment time is longer, and the machining accuracy of manual location is also lower.So prior art has the following disadvantages: cost height, installation are slowly, debugging is complicated, positioning accuracy is low.
Technical problem to be solved in the utility model is to overcome the deficiencies in the prior art, and a kind of simple in structure, cost is low, installation is fast, debugging is simple and positioning accuracy is high drawer type mould is provided.
The technical scheme that the utility model adopted is: the utility model comprises counterdie and patrix, described counterdie comprises bottom base, is arranged at guide pillar and bed die and a pair of guide rail that vertically is arranged on the described bottom base on the described bottom base, described patrix comprises top base, is arranged at guide hole and mold and a pair of guide rail that vertically is arranged at described top base on the described top base, described guide hole and described guide pillar are suitable, and described bed die and described mold can slide along described guide rail respectively.
Described counterdie and described patrix also comprise a pair of positioner respectively; described positioner is arranged at described bottom base and described top base the inside respectively; described positioner is provided with some alignment pins moving up and down; be respectively arranged with the locating hole that is complementary with described alignment pin on described bed die and the described mold; described positioner is provided with the screw rod that stretches out described bottom base and described top base, and described screw rod is provided with positioning knob.
Be respectively equipped with handle on described bed die and the described mold.
The beneficial effects of the utility model are: because the utility model has adopted guide rail, can be along the mould and the positioner of guide rail slip, form the mould structure of drawer type, select according to wiring board to be processed when using first, bed die also pushes mould in the guide rail, fix with alignment pin, go up then, down, a left side, the right punch press workbench of regulating, make guide pillar and guide hole can correcting on, counterdie is a upright position, on, the interlock degree of depth of counterdie enables neat cutting, just first plate can have been done, to be designed to same thickness at the described mold and the bed die of every kind of circuit board, when reusing like this, only need to replace with according to different wiring boards, bed die, and do not need to regulate again, therefore install fast, debugging is simple and positioning accuracy is high, and the utility model is relatively simple for structure, cost is low.
Fig. 1 is the structural representation of the utility model counterdie 1;
Fig. 2 is the plan structure schematic diagram of the utility model counterdie 1;
Fig. 3 is the structural representation of the utility model patrix 2;
Fig. 4 is the structural representation of looking up of the utility model patrix 2;
Fig. 5 is the structural representation of positioner 10 of the present utility model.
As Fig. 1, Fig. 2, Fig. 3, Fig. 4, shown in Figure 5, the utility model comprises counterdie 1, patrix 2.Described counterdie 1 comprises bottom base 3 and is arranged at guide pillar 7 and bed die 4 and pair of guide rails 9 and a pair of positioner 10 on the described bottom base 3; Described patrix 2 comprises top base 5 and is arranged at guide hole 8 and bed die 6 and pair of guide rails 9 and a pair of positioner 10 on the described top base 5; Described guide hole 8 and a pair of sliding pair of described guide pillar 7 suitable formation, described bottom base 3 is fixed on the punch press workbench, described top base 5 is fixed on the drift of punch press, pair of guide rails 9 is vertically fixed on the described bottom base 3 and is in the two ends, the left and right sides of described bed die 4 respectively, pair of guide rails 9 is vertically fixed on the described top base 5 and the two ends, the left and right sides of the described mold 6 that is in respectively, and described bed die 4 and described mold 6 can slide along described guide rail 9 respectively.
A pair of described positioner 10 on the counterdie 1 is arranged at described bottom base 3 the insides respectively, each longitudinal positioning device 10 is provided with two alignment pins 12 moving up and down, and the corresponding position is provided with the locating hole 11 that is complementary with described alignment pin 12 on the bed die 4 of bottom base 3 tops; Similar therewith, a pair of described positioner 10 on the patrix 2 is arranged at described top base 5 the insides respectively, each positioner 10 is provided with two alignment pins 12 moving up and down, and the corresponding position is provided with the locating hole 11 that is complementary with described alignment pin 12 on the mold 6 of top base 5 tops; Described positioner 10 is provided with the screw rod 13 that stretches out described bottom base 3 and described top base 5, and described screw rod 13 is provided with positioning knob 14.
Be respectively equipped with handle 15 on described bed die 4 and the described mold 6.
When installing first, respectively bottom base 3 is fixed on the punch press workbench, top base 5 is fixed on the drift of punch press, the described handle 15 of Hand held mould pushes mould in the described guide rail 9 then, rotate the positioning knob 14 on the described positioner 10, alignment pin is inserted in the locating hole with fixed mould, left and right adjusting make guide pillar 7 and guide hole 8 can the upper and lower mould of correcting a upright position, the interlock degree of depth of the upper and lower mould of upper and lower adjusting enables neat cutting, and it is die-cut and checked just can to begin to do initial workpiece then.In addition, can also hand described handle 15 carrying moulds, use faster convenience.To be designed to same thickness at the mold 6 and the bed die 4 of every kind of circuit board, in the time of will making different circuit boards like this, only need at different circuit boards replace with, bed die gets final product, and do not need to adjust punch press, so the utility model is a kind of simple in structure, cost is low, installation is fast, debugging is simple and positioning accuracy is high drawer type mould.
1, a kind of drawer type mould, comprise counterdie (1), patrix (2), described counterdie (1) comprises bottom base (3) and is arranged at guide pillar (7) and bed die (4) on the described bottom base (3), described patrix (2) comprises top base (5) and is arranged at guide hole (8) and mold (6) on the described top base (5), described guide hole (8) is suitable with described guide pillar (7), it is characterized in that: described counterdie (1) and described patrix (2) also comprise a pair of guide rail (9) that vertically is arranged at described bottom base (3) and vertically is arranged at described top base (5) respectively, and described bed die (4) and described mold (6) can slide along described guide rail (9) respectively.
2, drawer type mould according to claim 1, it is characterized in that: described counterdie (1) and described patrix (2) also comprise a pair of positioner (10) respectively, described positioner (10) is arranged at described bottom base (3) and described top base (5) the inside respectively, described positioner (10) is provided with some alignment pins moving up and down (12), be respectively arranged with the locating hole (11) that is complementary with described alignment pin (12) on described bed die (4) and the described mold (6), described positioner (10) is provided with the screw rod (13) that stretches out described bottom base (3) and described top base (5), and described screw rod (13) is provided with positioning knob (14).
3, drawer type mould according to claim 1 and 2 is characterized in that: be respectively equipped with handle (15) on described bed die (4) and the described mold (6).
Effective date of abandoning :
20080416
CN 200520121361
CN2866049Y
( en )
CN2866049Y
true
CN2866049Y
( en )
CN 200520121361
Expired - Lifetime
CN2866049Y
( en )
CN100382661C
( en )
*
CN102335931A
( en )
*
Die cutting mechanism of bag making machine
CN102672758A
( en )
*
Matching structure of combined mold and punching machine for manufacturing flexible circuit board
CN103796431A
( en )
*
CN104338815A
( en )
*
Large punch press applied to automobile processing and provided with movable base
CN104552451A
( en )
*
CN100382661C
( en )
*
CN102335931A
( en )
*
Die cutting mechanism of bag making machine
CN102672758A
( en )
*
Matching structure of combined mold and punching machine for manufacturing flexible circuit board
CN103796431A
( en )
*
CN103796431B
( en )
*
CN104338815A
( en )
*
Large punch press applied to automobile processing and provided with movable base
CN104552451A
( en )
*
Double end footwear mould carving and milling machine
Numerical control double-station mould engraving and milling machine
Aiming type automatic piercing machine for decoration
Progressive die for producing right fixed support of automobile instrument beam
Novel cantilever-type automatic special-shaped glass-cutting machine
A kind of automatic punching machine
Protruding pole die replaced and installed quickly
Synchronous lifting tool carrying mechanism of special-shaped sponge cutting machine
Adjustable device for forming right-angle folded edge of die
A kind of automatic punching machine
Apparatus for processing gear surface of gear
High-speed fractional molding die for guide rail class stamping parts
Membrane machine is cut in digitization of PCB dry film circuit
Equipment for processing tooth surface of gear
Machining process of two specially shaped holes on two sides of molding mold cavity for automobile instrument panel
Mold engraving and milling machine with conveying device
Cold stamping processing device of crankshaft multiple spline teeth
A kind of panel beating omnipotent adjustable positioner of activity
Abandonment of patent right or utility model to avoid double patenting
Крупный шрифт • контрастные цвета • скрыть картинки
РУС
ENG
ITA
GER
FRA
ESP
中文
日本
Музей
Посетителям
Выставки и события
Коллекции
Медиа
Наука и образование
История
История музея
История коллекций
Здания
Главное здание
Галерея искусства стран Европы и Америки
Мемориальная квартира С.Т. Рихтера
Учебный музей
ЦЭВ «Мусейон»
Мастерская Э. Штейнберга
Музейный квартал
Отделы
Филиалы
Владикавказ
Екатеринбург
Калининград
Нижний Новгород
Санкт-Петербург
Томск
Руководство
Поддержи музей
Попечительский совет
Спонсоры и партнеры
Меценаты и патроны
Друзья Пушкинского
Фонды Пушкинского
Мероприятия
Благодарности
Online пожертвование
Волонтёры Пушкинского
Документы
Деятельность
Научная и просветительская
Издательская
Выставочная
Археологическая
Музыкальная
Пушкинский XXI
ИТ-развитие и инновации
Социальная инклюзия
Общая информация
Пресс-центр
О проекте
Контакты
Вакансии
Использование материалов и изображений сайта
Cпланировать визит
Билеты и льготы
Режим работы и адреса зданий музея
Экскурсии, события, программы
Правила посещения и рекомендации
Посетителям с инвалидностью
Книги и сувениры онлайн
Шедевры
Живопись
Графика
Скульптура
Прикладное искусство
Древний Восток
Искусство и археология Античного мира
Нумизматика
Художественная фотография
Коллекция слепков
Коллекция и элект
Нежно трахает брюнетку засыпав ее лепестками роз
Афророссиянин отъебал телку во все дырки
Брюнетка светит пиздой и сиськами на крыше не повторяйте этот опыт