Future Outdoor Dvb T2

🔞 ALL INFORMATION CLICK HERE 👈🏻👈🏻👈🏻

Future Outdoor Dvb T2
Home » Kingbox » Kingbox DVB-T2 High Definition Digital Terrestrial Receiver User Manual
(ISO/IEC14496-10) HEVC main profile @ level 4.1
The remote control works with 2 AAA batteries, 1.5V (included). On the rear of the remote control, there is the batteries compartment. To open it, push slightly the upper part of the window (identified by knurling) and slide the lid. Place the batteries following the right polarity, indicated on the bottom of the compartment. Close the lid, sliding until the end. Use only batteries of the specified size and voltage. If the remote control is not used for a long time, remove the batteries. Do not leave dead batteries in the remote control. If liquid is produced from the batteries, wipe it off with a cloth and replace the batteries. Do not throw batteries into fire, do not short-circuit them, do not open them or subject them to excessive temperature. Batteries are not rechargeable, do not attempt to recharge them. Replace the batteries with others of the same type. Do not use a new and an old battery or batteries of a different type, replace both with new identical ones. Do not disperse batteries in the environment.
Using the remote control The remote control must be directed towards the front of the appliance, where the IR sensor is. Remove any object that may influence the trajectory from the remote control to the sensor. Exposure to strong sunlight could affect the sensitivity of the remote control.
WARNING: connect the appliance to the mains only after making all the necessary connections. Make sure to have inserted the batteries in the remote control, adjustments may only be necessary with the remote control. Refer to the previous diagrams and images (Figure 2) for the identification of the correct position of the sockets on the decoder.
Antenna connection Connect the coaxial cable of the antenna connected to the wall socket with the ANT IN socket (see Figure 2) on the back of the device.
Connection to the television There are two way to connect the appliance to the television: through an HDMI cable or a SCART cable (both cables are not included in the packing). Choose the most appropriate one based on the TV. If the TV is equipped with an HDMI socket, using it to have the maximum video and audio resolution being a digital output.
The SCART cable (not included) must be inserted in the proper socket on the television, following the correct polarity provided by the shape of the connector, and in the socket on the rear of the appliance (see Figure 2), automatically the television will show the home screen of the decoder, once turned on.
The HDMI cable (not included) must be inserted in the proper socket on the television and in the socket on the rear of the appliance (see Figure 2). It is recommended to take note of which TV socket is used (usually it is indicated as HDMI 1, HDMI 2, ….). The TV will not automatically display the initial screen of the decoder, it will be necessary to select the source using the TV remote control (see its manual, usually on the TV remote controls it is indicated as SOURCE, INPUT …; then choose the HDMI 1 icon .. or HDMI 2 or HDMI 3 based on the HDMI input to which the HDMI cable is connected).
Select the video source via the TV settings (see the TV manual for any information), if the HDMI connection is used; instead with the SCART connection, the selection will be automatic. On the decoder display the “0000” sign will appear.
The home screen INSTALLATION GUIDE allows the choice of the language (“Lingua OSD”) and the country (“Paese”), the possibility to search only the not encrypted (FTA: Free To Air) or also those the pay-per-view ones (ALL). Moreover, it’s possible to choose if supply the antenna or not (for further info see page 13). The factory settings for language and country are “Italiano” (Italian) and “Italia” (Italy). Both the parameters can be changed via the arrows keys, after selecting what is wanted to modify, using the arrows keys on the remote control skip to the next menu.
Once the choice is made select CHANNEL SEARCH using the arrows key, then press OK to start the automatic search of the channels. Pressing EXIT the main menu is open. The operation may take a few minutes. At the end of the search, the decoder may require the choice between two channels that would occupy the same position, to make the choice use the arrow keys and finally the OK key. If no choice is made the first channel will be selected.
IMPORTANT NOTES In the event that the channels stored in the search are not arranged according to the national standard which provides for their ordering according to their importance (RAI 1 on channel 1; RAI 2 on channel 2; RAI 3 on channel 3, RETE 4 on Channel 4 ; CANALE 5 on channel 5; ITALIA 1 on channel 6; LA7 on channel 7 …), means that the LCN function is not active. To activate the LCN order, please follow the instructions in the following chapter (PROGRAM).
Overview of the menus The main menu is divided in 7 submenus: PROGRAM, PICTURE, SEARCH, TIME, OPTION, SYSTEM and USB. Access to the main menu is by pressing the MENU button on the remote control. Using the arrow keys, you can open the various submenus.
Program This menu allows you to sort, modify and delete the stored channels. To open the menu PROGRAM, select the first icon bottom from the left. In this menu it is possible to activate the “LCN” function: select with the arrow keys SORT and select between the different options BY LCN, then activate the LCN, selecting LCN and ON, as in the picture above; so, the channels will be arranged according to national importance. The factory setting provides that the channels are automatically arranged according to LCN, and the LCN sorting is active, just like in the image above. IMPORTANT: to activate sorting by LCN both the sorting by LCN (SORT: BY LCN) and LCN activation (LCN: ON) must be selected.
Picture This menu allows you to change the image display format. The format is set automatically according to the TV to which the decoder is connected. If not, select 576I / P or 702P if you are using a TV with only the SCART socket, or 1080i / p if you are using a TV with an HDMI socket (1080p gives the maximum video resolution, but not all TVs support it). This menu also allows you to change the SCART output (TV-SCART), the display on the decoder via
PANEL SETTING (whether to display the channel number or the current time during transmission). To open the menu PICTURE, select the second icon bottom from the left. Search This menu allows you to search the channels, both automatic and manual. To open the menu SEARCH, select the third icon bottom from the left. IMPORTANT NOTE: the ANTENNA POWER parameter should normally be left OFF unless a portable indoor antenna that requires an external 5Vdc power supply is connected. These indoor antennas are special antennas and are designed to operate at 5Vdc, taking their power from the “RF IN” socket on the decoder. By enabling the ANTENNA POWER function and connecting an antenna cable from the decoder to the indoor antenna, we will supply, through the same antenna cable, the voltage necessary to power the internal amplifier of the antenna. So, if the decoder is connected the antenna to the home TV system or an indoor antenna that does not require a voltage of 5Vdc, the antenna power supply must be left off.
Time This menu allows the time zone to be adjusted and the decoder to be turned off automatically using the SLEEP (HOUR) function (it is possible to set from 1 to 12 hours), as per European regulations it is set to 3 hours1. By entering POWER ON/OFF you can set the automatic switching on and off of the decoder. To open the TIME menu, select the fourth icon at the bottom from the left.
Option This menu allows you to change the language of the on-screen menu (OSD), subtitles or audio. To open the OPTIONS menu, select the fifth icon at the bottom from the left. This function contributes to energy saving by ensuring that the device turns off after the time set after the last command sent via the remote control. Before switching off, a message is displayed, see the chapter Energy saving.
System This menu allows you to change the system settings. To open the SYSTEM menu, select the sixth icon from the bottom left.
USB This menu allows you to manage the multimedia options. To open the USB menu, select the seventh icon at the top from the left.
Channel selection To select the channel, simply enter its number using the channel numeric keypad, or use the CH + and CH-keys which allow you to move forward or backward by one unit.
It’s possible to visualize also the list of the channels using the OK key on the remote control. Sliding the list via arrow keys and confirming with OK, it’s possible to visualize the desired channel. Or by pressing the GREEN key a virtual keyboard appears, through which you can find the desired channel by entering its name. Or by pressing the EG (GUIDE) key on the remote control you access the Program Guide (if supported by the television broadcaster), using the arrows keys you can change the channel, keeping the guide open; once you have reached the desired channel, close the window with the EXIT key.
Volume adjustment Using the VOL + or VOL-keys, it is possible to adjust the volume of the audio. To completely reset the volume, use the MUTE button on the remote control, once you retype the volume it will reset to the previous value.
Channel information Pressing the INFO key on the remote control information about the channel being viewed will be displayed: if the channel is HD ( ), if the Teletext ( ) and subtitles ( ) are available, if the channel is locked ( ) or if it is encrypted ( ) the corresponding symbols will be highlighted.
By pressing the INFO button again further information, such as the quality and strength of the video signal can be got. The banner will be visible for some seconds, to make it disappear press EXIT.
Switching TV/RADIO By pressing TV/RADIO key on the remote control you can switch between TV and radio channels (audio only) and vice versa.
Subtitle activation Subtitles show what the characters say in the television programs, this is very useful for those with hearing problems. The subtitles are available if the symbol ( )is highlighted in the info banner related to the channel by pressing the INFO key. To activate (or deactivate) the subtitle, press the SUBTITLE key on the remote control, a window shows the available options. Via arrow keys highlight the desired option and select with OK, the windows will be closed, and the subtitles will be available. In the factory settings, the subtitles are disabled (OFF).
Channel organization The channels are by default organized according to LCN (Logical Channel Numbering), which allows to automatically assign to each television service received a predefined position within the list. You can change the numbering to your liking by accessing the PROGRAM menu, pressing the MENU button on the remote control and the arrow keys, and then to the submenu CHANNEL EDIT, using the arrow keys and the OK key. Or opening the channel list with the OK key and pressing the YELLOW key on the remote control. The CHANNEL EDIT menu allows you to delete one or more channels, move them, lock them, add them to the favorites list skip one or change their name. To delete a channel, press 1 on the numeric keypad of the remote control, the first icon on the top left (bin,) is highlighted, use the arrow keys to position the channel to be deleted, and press the OK key. Next to this appears, the channel has not yet been deleted, you can cancel the selection by typing OK (the red disappears). When you have finished selecting the channels to delete, press the EXIT button, and the system asks you to confirm the action (saving the deletion will be effective).
NOTE: The selected channel is deleted, and the list is repositioned to cover the hole. You can select the entire list by pressing the RED button on the remote control. IMPORTANT : The deleted channel can only be recovered through a new channel search. To move a channel, type 2 on the numeric keypad of the remote control, the second icon on the top left (arrows, ) is highlighted, use the arrow keys to position the channel to be moved, press OK, two red arrows ( ) will appear next to them, with the arrow keys move it to the desired location. At the end, press the EXIT button, the system asks you to confirm the action (saving the move will be effective). NOTE: The channel is moved within the list and the numbering is recalculated.
To skip a channel, type 3 on the numeric keypad of the remote control, the third icon at the top left (arrow, ) is highlighted, use the arrow keys to position the channel to skip, press OK, a red arrow ( ) will appear next to it. At the end, press the EXIT button, the system asks you to confirm the action (saving the jump will be effective).
NOTE: The selected channel is not shown in the channel list and the list is repositioned to fill the gap. You can restore it by following the same procedure above, the symbol will disappear, and the channel will be visible again. To lock a channel, type 4 on the numeric keypad of the remote control, the password is requested (the default is 888888, six eights, to change it see the chapter Change password), then the fourth icon at the top left (padlock, ) is highlighted, use the arrow keys to go to the channel to be blocked, press OK, a red padlock ( ) will appear next to it. At the end, press the EXIT button, the system asks you to confirm the action (saving the block will be effective). NOTE: The viewing of the channel is locked, to unlock it you need to enter the password. To unlock it, repeat the above operations, the symbol will disappear. The padlock at the bottom right will be highlighted among the channel information. You can block the entire list by pressing the RED button on the remote control, while the channels to lock are chosen. To add a channel to the favorite, type 5 on the numeric keypad of the remote, then the fourth icon at the top left (heart, ) is highlighted, use the arrow keys to go to the channel to be blocked, press OK, a list of favorite categories to choose from with the arrow keys, by confirming with OK the symbol will appear (it is possible to select more than one category for the same channel). To confirm the selections type EXIT, will appear next to the added channel. At the end, press the EXIT button, the system asks you to confirm the action (saving the block will be effective). NOTE: To view your favorite channels press FAV on the remote control, the categories containing the favorites will appear, selecting the category with OK, the list of favorite channels for that category will appear. To access it, press OK. To delete a channel from a list, repeat the above steps, the symbol will disappear. To rename a channel, use the arrow keys to move to it and press the GREEN key, using a virtual keyboard it is possible to change the name of the channel, at the end of typing select OK. Pressing the EXIT key saves the changes and exits the menu.
The decoder allows you to open multimedia files of audio, video or image type, present on a USB memory suitably inserted in the slot of the SIDE A (Figure 1) of the device. Although the device can read a significant number of different formats, some may not be supported. Furthermore, it is possible that due to the unsupported CODECs, some video files may be illegible, despite the format being readable. To access the contents of the USB memory, insert the key with the contents to be displayed and press the MENU button on the remote control and reach the USB menu and from there the MEDIA CENTRE submenu.
WARNING: not all storage devices are compatible with the device, the manufacturer is in no way responsible for any damage or loss of data. To open audio files, access the MEDIA CENTRE menu, select the MUSIC icon with the arrow keys and the OK button on the remote control. The decoder allows you to navigate within the folders contained in the USB key: use the arrow keys to move through the list of folders or files, press OK to open the folder or file chosen; to return to the upper folder using the EXIT button. Using the options of the banner below, which can be accessed by pressing the OK key, you can skip to the next song to the previous one, pause, show the lyrics of the song (if present) LRC, stop playback, choose playback, show information about the file being played and adjust the volume. For some of these options, the corresponding buttons on the remote control can be used.
To view an image, access the MEDIA CENTRE menu, and select the PICTURE icon with the arrow keys and the OK button on the remote control. The decoder allows you to navigate within the folders contained in the USB key: use the arrow keys to move through the list of folders or files, press OK to open the folder or file chosen; to return to the upper folder use the EXIT button. The images are displayed individually or sequentially. To activate the sequence view mode select the icon , to stop and exit use. The symbol allows you to select the display modes; while the symbol displays the information of the image file. The banner is activated using the OK button on the remote control. For some of these options, the corresponding buttons on the remote control can be used.
To view a movie, access the MEDIA CENTRE menu, select the VIDEO icon with the arrow keys and the OK button on the remote control. The decoder allows you to navigate within the folders contained in the USB key: use the arrow keys to move through the list of folders or files, press OK to open the folder or file chosen; to return to the upper folder use the EXIT button. Using the options of the banner below, which can be accessed by pressing the OK key, it is possible to skip to the next video , to the previous one ,pause ,fast forward ,fast reverse ,stop playback ,choose playback modes , show information about the file being played , and adjust the volume . For some of these options the corresponding buttons on the remote control can be used.
Alternatively, to access the contents of the memory, press USB on the remote control, this allows you to view the image, video and audio files.
Some broadcasters make available information about their programs. To visualize them press the EG (GUIDE) key on remote control.
It is possible to view the programming of the selected network within 24 hours. From this menu it is also possible to access the Guide of the other channels, by using the arrow keys and selecting the new channel from the list on the left. The information that can be displayed depends on the selected channel. To view the plot of a program, select it using the arrow keys from the list on the right and press OK,a window will appear with the description of the program made available by the television broadcaster. To close it press EXIT.
Teletext Some channels also transmit a text information service (teletext) which can be activated by pressing the TTX key on the remote control (channels broadcasting teletext are marked with the symbol ). By following the indications of the index, you can select the required page. The functionality is not active for all channels.
Multilanguage transmission If a channel is broadcast in multiple languages, you can select the language in which you want to listen to the program: press AUDIO, a menu opens in which you can select an alternative language, if any, with the arrow keys and the OK button. 
TV and radio channel search To search for television and radio channels there are two ways, automatic and manual. Access the SEARCH menu and select AUTO SEARCH the decoder searches for all channels and saves data. While selecting MANUAL SEARCH it searches for a specific channel. WARNING: the activation of AUTO SEARCH will delete al
Family Nudist Fucking Ru
Milf Lingerie Hd
Use Ass