Flashing instructions

Before starting, make sure you have everything ready:

Requirement:

💻 PC / Laptop

Windows or Linux computer

🔌 USB Cable

Use the original cable that came with your phone

📱 Your Phone

Make sure battery is at least 50% before starting

⚙️ Phone Drivers

Install them on your PC if you haven't already

⚠️ Important: This process will erase all data on your phone. Back up your photos, contacts, and important files first!

⚠️ MUST READ — Why You Get "Path Not Found" Errors / Script Won't Run

THIS IS THE #1 CAUSE of script failures: the folder you extract the ROM into must NOT contain spaces, symbols, or special characters — including every parent folder in the full path.

❌ BAD paths (will break the script):

C:\Users\My Name\Downloads\HyperOS 3.0.303.0\re

D:\ROM Tanzanite (final)\FlashScript

✅ GOOD paths:

C:\flash\HyperOS3.0.303.0_tanzanite

C:\rom\tanzanite

Safe method: create a new folder directly on the root of a drive (e.g. C:\flash) and extract the ROM there. Don't extract to Desktop, Downloads, or any folder with spaces, parentheses, or accented characters (letters like ñ, é also count — a Windows username with accents is a common hidden cause of this exact error).

🚀 Flashing Steps

Step 1 — Extract the ROM File

After downloading the ROM file, right-click → Extract using WinRAR or 7-Zip. Do not run it directly from inside the ZIP/RAR archive.

Step 2 — Boot into Bootloader Mode

Turn off your phone completely, then press and hold Volume Down + Power at the same time until the Fastboot/Bootloader screen appears.

Step 3 — Connect Your Phone to PC

Plug your phone into the computer using a USB cable. Make sure both ends are firmly connected.

Step 4 — Run the Flash Script with sudo

Open the extracted folder, then:

Windows → double-click FlashScript_EN.bat

Linux → run FlashScript.sh via terminal

Step 5 — Select "Format Data"

From the menu that appears, choose the Format Data option. This will wipe your phone's storage so the new ROM can be installed cleanly.

Step 6 — Wait for the Process to Finish

The flashing process runs automatically. Do NOT unplug the USB cable until it's completely done! Disconnecting mid-process can permanently damage your phone.

Once flashing is complete, your phone will restart on its own. The first boot usually takes 1 to 3 minutes — this is completely normal, so just be patient.

Step 8 — All Done! 🎉

The ROM has been successfully installed on your phone!

🔧 Still Getting Errors?

If you moved to a space-free path and it's still throwing path errors:

1.Check if your Windows username has spaces or accents (C:\Users\Your Name) — if so, extract to C:\flash instead of Downloads/Desktop

2.Make sure no subfolder inside the ROM folder got manually renamed with a space

3.Try launching CMD/terminal directly from the folder (Shift + right-click → "Open PowerShell/Terminal window here")