Flashing Instructions HyperNexT

🧰 What You'll Need

Before starting, make sure you have everything ready:

Requirement

Details

💻 PC / Laptop

Windows or Linux computer

🔌 USB Cable

Use the original cable that came with your phone

📱 Your Phone

Make sure battery is at least 50% before starting

⚙️ Phone Drivers

Install them on your PC if you haven't already

⚠️ Important: This process will erase all data on your phone. Back up your photos, contacts, and important files first!

🚀 Flashing Steps

Step 1 — Extract the ROM File

After downloading the ROM file, right-click → Extract using WinRAR or 7-Zip. Do not run it directly from inside the ZIP/RAR archive.

Step 2 — Boot into Bootloader Mode

Turn off your phone completely, then press and hold Volume Down + Power at the same time until the Fastboot/Bootloader screen appears.

Step 3 — Connect Your Phone to PC

Plug your phone into the computer using a USB cable. Make sure both ends are firmly connected.

Step 4 — Run the Flash Script

Open the extracted folder, then:

Windows → double-click FlashScript_EN.bat

Linux → run FlashScript.sh via terminal

Step 5 — Select "Format Data"

From the menu that appears, choose the Format Data option. This will wipe your phone's storage so the new ROM can be installed cleanly.

Step 6 — Wait for the Process to Finish

The flashing process runs automatically. Do NOT unplug the USB cable until it's completely done! Disconnecting mid-process can permanently damage your phone.

Step 7 — Wait for the Phone to Boot

Once flashing is complete, your phone will restart on its own. The first boot usually takes 1 to 3 minutes — this is completely normal, so just be patient.

Step 8 — All Done! 🎉

HyperNexT ROM has been successfully installed on your phone!

💬 Support

If you have questions or face errors, contact:

📩 @idiscuss1