Flashing Instruction for iqraOS V 1.0

iqraOS / HyperOS Based Fastboot ROM — Official Flashing Guide

Please read all instructions carefully before proceeding.

⚠️ Disclaimer

• This package is a Fastboot ROM and must be flashed only using the provided Windows flasher.
• Do NOT flash via custom recovery.
• Make sure your bootloader is unlocked and drivers are properly installed.
• You are responsible for any damage caused by improper flashing.

📦 Requirements

• Windows PC / Laptop
• USB Cable
• Extracted ROM folder on Desktop
• Device in Fastboot Mode

🚀 Flashing Procedure

1. Extract the downloaded ROM zip file to your Desktop.
2. Open the ROM folder and locate FlashWindows.bat.
3. Double-click FlashWindows.bat to launch the flasher.
4. The tool will ask for a flashing preference:
5. y → Clean Flash (Formats Data – Recommended for best stability)
6. n → Dirty Flash (Keeps existing user data)
7. Wait patiently while the flashing process completes.
8. Do not disconnect the device during flashing.
9. Once finished, the device will reboot automatically.

🔄 First Boot Information

• Initial boot can take several minutes.
• Boot delay is normal; do not force restart or panic.

💡 Notes

• A clean flash is strongly recommended when switching base versions.
• If you encounter boot issues, reflash using the Clean Flash option.

Enjoy the experience — iqraOS | Based on HyperOS