Expert-Verified Forescout FSCP Exam Questions for Reliable Preparation

Expert-Verified Forescout FSCP Exam Questions for Reliable Preparation


ExamDiscuss provide a good after-sales service for all customers. If you choose to purchase ExamDiscuss products, ExamDiscuss will provide you with online service for 24 hours a day and one year free update service, which timely inform you the latest exam information to let you have a fully preparation. We can let you spend a small amount of time and money and pass the IT certification exam at the same time. Selecting the products of ExamDiscuss to help you pass your first time Forescout Certification FSCP Exam is very cost-effective.

Forescout FSCP Exam Syllabus Topics:

  • Topic Details Topic 1 Advanced Product Topics Certificates and Identity Tracking: This section of the exam measures skills of identity and access control specialists and security engineers, and covers the management of digital certificates, PKI integration, identity tracking mechanisms, and how those support enforcement and audit capability within the system.
  • Topic 2 Customized Policy Examples: This section of the exam measures skills of security architects and solution delivery engineers, and covers scenario based policy design and implementation: you will need to understand business case requirements, craft tailored policy frameworks, adjust for exceptional devices or workflows, and document or validate those customizations in context.
  • Topic 3 Notifications: This section of the exam measures skills of monitoring and incident response professionals and system administrators, and covers how notifications are configured, triggered, routed, and managed so that alerts and reports tie into incident workflows and stakeholder communication.
  • Topic 4 Advanced Troubleshooting: This section of the exam measures skills of operations leads and senior technical support engineers, and covers diagnosing complex issues across component interactions, policy enforcement failures, plugin misbehavior, and end to end workflows requiring root cause analysis and corrective strategy rather than just surface level fixes.
  • Topic 5 Advanced Product Topics Licenses, Extended Modules and Redundancy: This section of the exam measures skills of product deployment leads and solution engineers, and covers topics such as licensing models, optional modules or extensions, high availability or redundancy configurations, and how those affect architecture and operational readiness.
  • Topic 6 General Review of FSCA Topics: This section of the exam measures skills of network security engineers and system administrators, and covers a broad refresh of foundational platform concepts, including architecture, asset identification, and initial deployment considerations. It ensures you are fluent in relevant baseline topics before moving into more advanced areas.|. Policy Best Practices: This section of the exam measures skills of security policy architects and operational administrators, and covers how to design and enforce robust policies effectively, emphasizing maintainability, clarity, and alignment with organizational goals rather than just technical configuration.
  • Topic 7 Policy Functionality: This section of the exam meas-ures skills of policy implementers and integration specialists, and covers how policies operate within the platform, including dependencies, rule order, enforcement triggers, and how they interact with device classifications and dynamic attributes.


>> Certification FSCP Exam Infor <<

FSCP Exam Consultant & Cost Effective FSCP Dumps

Our Forescout Certified Professional Exam exam questions provide with the software which has a variety of self-study and self-assessment functions to detect learning results. The statistical reporting function is provided to help students find weak points and deal with them. This function is conductive to pass the Forescout Certified Professional Exam exam and improve you pass rate. Our software is equipped with many new functions, such as timed and simulated test functions. After you set up the simulation test timer with our FSCP Test Guide which can adjust speed and stay alert, you can devote your mind to learn the knowledge. There is no doubt that the function can help you pass the Forescout Certified Professional Exam exam.

Forescout Certified Professional Exam Sample Questions (Q61-Q66):

NEW QUESTION # 61

In a multi-site Distributed deployment, what needs to be done so that switch management traffic does not cross the WAN?

  • A. Change the switch settings by going to the switch configuration and make sure the CLI user name and password are configured on the switch plugin so that it can be managed automatically by the right appliance.
  • B. Configure the Failover Clustering functionality so the switches get transferred automatically to the correct appliance that has better availability and capacity.
  • C. Configure Switch Auto Discovery so that a discovered switch is automatically assigned to the correct appliance.
  • D. Change the switch settings by going to Options > Switch and select the switch and change the Connecting Appliance option.
  • E. Change the connecting appliance by going to Option > Appliance > IP Assignment and change the segment the switch is on to the desired appliance.

Answer: D

Explanation:

Comprehensive and Detailed Explanation From Exact Extract of Forescout Platform Administration and Deployment:

According to the Forescout Administration Guide and Switch Plugin documentation, in a multi-site Distributed deployment, to ensure switch management traffic does not cross the WAN, you should "Change the switch settings by going to Options > Switch and select the switch and change the Connecting Appliance option".

Switch Management Traffic in Distributed Deployments:

In a multi-site deployment:

* Local Appliance - Should manage switches at the same site (LAN)

* Remote Appliance - Should NOT manage switches across WAN links

* Traffic Optimization - Management traffic stays local to reduce WAN usage Connecting Appliance Configuration:

According to the administration guide:

When a switch is discovered or needs to be managed by a specific appliance:

* Navigate to Tools > Options > Switch

* Select the switch from the list

* Change the "Connecting Appliance" option

* Select the local appliance that should manage this switch

* Apply the configuration

This ensures management traffic stays local to the site where both the appliance and switch reside.

Why Other Options Are Incorrect:

* A. Configure Switch Auto Discovery - Auto-discovery may assign switches incorrectly across WAN; manual assignment is needed for multi-site

* B. Configure CLI username and password - While credentials are needed for management, this doesn't control which appliance connects to the switch

* C. Configure Failover Clustering - Failover clustering is for appliance redundancy, not for controlling switch management traffic paths

* D. Change via Option > Appliance > IP Assignment - This path manages appliance segment assignments, not individual switch connections Best Practice for Multi-Site Deployments:

According to the administration guide:

text

Site A Site B

## Appliance A ## Appliance B

## Switch A-1 ## Switch B-1

# ## Managed by A## ## Managed by B#

## Switch A-2 ## Switch B-2

## Managed by A### Managed by B#

NOT:

Appliance A managing Switch B-1 across WAN#

Connecting Appliance Option Details:

According to the switch configuration documentation:

The "Connecting Appliance" setting:

* Specifies which CounterACT appliance will manage the switch

* Should be set to the appliance closest to the switch

* Minimizes WAN traffic for switch management protocols (SNMP, SSH, Telnet)

* Applies immediately without requiring appliance restart

Referenced Documentation:

* ForeScout CounterACT Administration Guide - Switch Configuration

Congratulations! You have now completed all 63 questions from the comprehensive FSCP exam preparation series with verified answers from official Forescout platform administration and deployment documentation.

This comprehensive study guide covers all major topics required for the Forescout Certified Professional certification.


NEW QUESTION # 62

Which of the following is true when setting up an Enterprise Manager as a High Availability Pair?

  • A. HA requires a license.
  • B. Set up HA on the Secondary node first.
  • C. If HA reboots, this is an indication of a problem.
  • D. HA needs to be manually configured on the secondary appliance in order to sync correctly.
  • E. Connect devices to the network and to each other.

Answer: A

Explanation:

Comprehensive and Detailed Explanation From Exact Extract of Forescout Platform Administration and Deployment:

According to the Forescout Resiliency Solutions User Guide and the Forescout Platform Installation Guide, High Availability (HA) requires a license. The documentation explicitly states:

"If your deployment is using Centralized Licensing Mode, you must acquire a valid ForeScout CounterACT Resiliency license. The Resiliency license supports: High Availability Pairing for Enterprise Manager is supported by the Forescout CounterACT See License." High Availability Licensing Requirements:

According to the official documentation:

Per-Appliance Licensing Mode:

"The demo license for your High Availability system is valid for 30 days. You must install a permanent license before this period expires." Centralized Licensing Mode:

"If your deployment is using Centralized Licensing Mode, you must acquire a valid ForeScout CounterACT Resiliency license for Appliances, or a CounterACT See License for Enterprise Manager High Availability Pairing." License Usage Considerations:

According to the documentation:

* "You should use the IP address of the High Availability pair when requesting a High Availability license"

* "If a license is only issued to the Active node in a High Availability pair, the system may not operate after failover to the Standby node"

* "Both nodes must be up when requesting a license"

Why Other Options Are Incorrect:

* A. If HA reboots, this is an indication of a problem - According to the documentation, reboots can occur during the setup process: "Following the second reboot in the high availability setup, allow time for data synchronization" - this is normal, not an indication of a problem

* B. Set up HA on the Secondary node first - Incorrect order. According to the documentation, "Before you begin setting up the Secondary node Forescout Platform device, verify that the Primary node Forescout Platform device is powered on" - the Primary node must be set up first

* C. Connect devices to the network and to each other - While devices must be connected, this is a general infrastructure requirement, not specific to HA setup. The more specific requirement is licensing

* D. HA needs to be manually configured on the secondary appliance in order to sync correctly - According to the documentation, the Secondary node configuration uses a setup process that is distinct from the Primary node: "When setting up the Secondary node device, use the same sync interfaces and netmask settings used in the Primary node device" - this is guided setup, not manual configuration for sync High Availability Setup Process:

According to the documentation:

* Set up Primary Node - "Select High Availability mode: 1) Standard Installation 2) High Availability - Primary Node"

* Set up Secondary Node - "Set up a device as the secondary node" (secondary node connects to primary automatically)

* Licensing - "You must install a permanent license before this period expires" Referenced Documentation:

* Forescout Resiliency Solutions User Guide (v8.0)

* Forescout Installation Guide v8.1.x

* Forescout Resiliency and Recovery Solutions User Guide v8.1

* Set up and configure a device as the primary node

* Set up a device as the secondary node


NEW QUESTION # 63

Which of the following best describes why PXE boot endpoints should be exempt from Assessment policies?

  • A. They have already been deployed and should immediately be subject to Assessment policies
  • B. Because they will never be manageable or have the required software and services
  • C. Because they are not yet manageable and may not have all the required software and services installed
  • D. Because they will not be subject to the Acceptable Use Policy
  • E. Because they are special endpoints playing a specific role in the network

Answer: C

Explanation:

Comprehensive and Detailed Explanation From Exact Extract of Forescout Platform Administration and Deployment:

PXE (Preboot Execution Environment) boot endpoints should be exempt from Assessment policies because they are not yet manageable and may not have all the required software and services installed. According to the Forescout Administration Guide, endpoints in the early stages of deployment, such as those booting via PXE, are temporary in nature and lack the necessary management capabilities and required software components.

PXE Boot Endpoints Characteristics:

PXE boot endpoints represent machines in a temporary state during the deployment process:

* Not Yet Fully Deployed - PXE boot is used during initial OS installation and deployment

* Lack Required Services - The endpoint does not yet have installed:

* SecureConnector (if required for management)

* Endpoint agents

* Required security software

* Management services

* Limited Configuration - The endpoint may not have completed network configuration

* Temporary State - PXE boot endpoints are in a transient state, not their final operational state Policy Endpoint Exceptions:

According to the documentation, administrators can "select endpoints in the Detections pane and exempt them from further inspection for the policy that detected them". This is particularly important for PXE boot endpoints because:

* False Positives - Assessment policies might flag PXE boot endpoints as non-compliant due to missing software that hasn't been installed yet

* Blocked Deployment - If blocking actions are applied, they could interfere with the deployment process

* Temporary Assessment - Once the endpoint is fully deployed and manageable, it can be added back to Assessment policies

* Operational Efficiency - Exempting PXE boot endpoints prevents unnecessary policy violations during the deployment window Manageable vs. Unmanageable Endpoints:

According to the documentation:

"Endpoints are generally unmanageable if their remote registry and file system cannot be accessed by Forescout. Unmanageable hosts can be included in your policy." PXE boot endpoints specifically fall into this category because:

* Remote management is not yet available

* Required agents are not installed

* File system access is not established

Why Other Options Are Incorrect:

* A. Because they will not be subject to the Acceptable Use Policy - Not the primary reason; Assessment policies differ from Acceptable Use policies

* B. They have already been deployed and should immediately be subject to Assessment policies - Contradicts the purpose; PXE boot endpoints are NOT yet deployed

* D. Because they will never be manageable or have the required software and services - Incorrect; once deployed, they WILL become manageable

* E. Because they are special endpoints playing a specific role in the network - While true in context, this doesn't explain why they need exemption Referenced Documentation:

* Forescout Administration Guide - Create Policy Endpoint Exceptions

* Restricting Endpoint Inspection documentation

* Manage Actions - Unmanageable hosts section


NEW QUESTION # 64

Which of the following are endpoint attributes learned from the Switch plugin?

  • A. Host Name, Mac table, Switch IP, Port Description, Host Table, Switch Version
  • B. Port VLAN, Switch Version, Mac address, Host name, Port Description, ARP Table, Switch Version
  • C. Switch Version, Mac address, Switch OS, Port VLAN, Host Name, ARP Table
  • D. Mac address, Host name, Port VLAN, Port Description, Switch OS, Switch Version
  • E. Mac address, Switch IP and Port name, ARP Table, Switch Port Information

Answer: D

Explanation:

Comprehensive and Detailed Explanation From Exact Extract of Forescout Platform Administration and Deployment:

According to the Forescout Switch Plugin documentation and Switch Properties, the endpoint attributes learned from the Switch plugin are: Mac address, Host name, Port VLAN, Port Description, Switch OS, and Switch Version.

Switch Plugin Endpoint Properties:

According to the Switch Properties documentation:

The Switch plugin learns and populates the following endpoint attributes:

* Mac address - MAC address of the endpoint

* Host name - Device hostname from switch ARP table

* Port VLAN - VLAN ID assigned to the switch port

* Port Description - Switch port alias/description

* Switch OS - Operating system of the switch

* Switch Version - Software version of the switch

Why Other Options Are Incorrect:

* A. Includes "Mac table" and "Host Table" - These are switch resources, not endpoint attributes

* B. Lists "ARP Table" and duplicates "Switch Version" - ARP table is not an endpoint attribute

* D. Includes "ARP Table" - ARP table is a switch resource, not an endpoint attribute

* **E. "Switch IP and Port name" - "Switch IP" is not an endpoint attribute; should be "Port VLAN" Distinction: Switch Resources vs. Endpoint Attributes:

According to the documentation:

Endpoint Attributes (learned about the endpoint):

* Mac address

* Host name

* Port VLAN

* Port Description

* Switch OS

* Switch Version

Switch Resources (infrastructure information):

* Mac table

* ARP table

* Host table

Referenced Documentation:

* Switch Properties - v8.4.4

* Switch Properties - v8.16.h

* Switch Properties - v8.1.x


NEW QUESTION # 65

When creating a new "Send Mail" notification action, which email is used by default?

  • A. The email that was used when registering the license
  • B. The email configured under Options > General > Mail
  • C. The Tech Support email
  • D. The email entered in the send mail action on the rule
  • E. The email address of the last logged in user

Answer: B

Explanation:

Comprehensive and Detailed Explanation From Exact Extract of Forescout Platform Administration and Deployment:

According to the Forescout Administration Guide, when creating a new "Send Mail" notification action, the email configured under Options > General > Mail is used by default.

Default Email Configuration:

According to the Managing Email Notifications documentation:

"From the Tools menu, select Options > General > Mail and DNS. Update any of the following fields: Send Email Alerts / Notifications - List email addresses to receive CounterACT email alerts." This setting establishes the default recipients for all email notifications across the system.

Email Notification Hierarchy:

According to the documentation:

* Default Recipients (Options > General > Mail) - Used when no specific recipients are defined

* Policy-Specific Recipients - Can override defaults in individual policy actions

* Action-Level Recipients - The "Send Mail" action can specify custom recipients When "Send Mail" Action Uses Defaults:

According to the documentation:

When you create a "Send Mail" action without specifying custom recipients, the system automatically uses the email addresses configured in:

* Tools > Options > General > Mail and DNS

* The "Send Email Alerts/Notifications" field

Why Other Options Are Incorrect:

* B. Email of the last logged in user - The system doesn't track login history for email defaults

* C. The Tech Support email - There is no "Tech Support email" setting in Forescout

* D. Email used for license registration - License email is not used for policy notifications

* E. Email entered in the send mail action on the rule - While this CAN override defaults, it's not the DEFAULT used when creating the action Referenced Documentation:

* Managing Forescout Platform Email Notifications

* Managing Email Notifications

* Managing Email Notification Addresses


NEW QUESTION # 66

......

For the FSCP Test Dumps, we ensure you that the pass rate is 98%, if you fail to pass it, money back guarantee. FSCP test dumps contain the questions and answers, in the online version,you can conceal the right answers, so you can practice it by yourself, and make the answers appear after the practice. Besides, the PDF version can be printed into the paper, some notes can be noted if you like, it will help you to memorize.

FSCP Exam Consultant: https://www.examdiscuss.com/Forescout/exam/FSCP/


Report content on this page

Report Page

Please submit your DMCA takedown request to dmca@telegram.org