Door Handle Replacement Tools To Enhance Your Daily Life
Door Handle Replacement
Door handles may seem like something minor but if you aren't happy with the way they look or find them difficult to use then it's time to replace them. Installing a new door handle is easy if you have patience.
The majority of modern door handles come with cover plates that hide the screws for an attractive appearance. If the new handle doesn't already have them connected, you'll have to attach them separately.
Remove the Old Handle
The door handle is not only a decorative addition to your home it also serves as an important safety feature that lets you to lock and unlock your door. However, over time your door handle can lose its grip, become loose, or look old and worn. This is a good indication that it's time to replace the door handle.
If your door handle is becoming difficult to use, it might be time to replace it. This is a serious problem because you won't be able to lock or unlock the door, which could put your family and yourself at risk.
It's also recommended to replace the handle on your door in the event that it's damaged or broken. A damaged or broken door handle is dangerous, especially for elderly and children members who may struggle to open it. They could be trapped. It's a good thing that it's simple to fix a damaged door handle by replacing the handle that was broken.
Most modern door handles are standard size and so they should fit any door. If you're not sure if your new door handle will fit, try removing the old one and determining the holes in its housing. This will let you purchase the correct size door handle.
The most straightforward method to remove your old door handle is to unscrew it from the door. This is usually done with a screw driver. Some door handles have a cover plate which hides the mounting screws. You will need to remove the cover plate to gain access to the screws. After removing the handle that was previously used, take note of the way the spindle has been connected. This will assist you in aligning the new handle.
Alternately, you can take off the door handle by uncrewing it from the latch mechanism. You can make use of a screwdriver to take off the door handle. However, you will have to locate the tiny latch which is located on the edge trim piece. Once you've removed the latch, unscrew the handle from the strike plate and then remove the latch from the door edge.
Take off the Strike Plate
You'll need to replace the latch plate after replacing the handle. It's the plate that holds the hole through which the door's latch hooks in when the door is closed. The box that the new handles are packaged in will have two options for latch plates - either a rectangular or circular (see the diagram above detailing door handle parts). If your current latch plate has a rectangular shape, switch it to a circular one so that the latch hooks onto the strike plate in a way that makes the handle easier to use.
The first step is to loosen the screw that holds the latch plate in place. The screws are typically tight and require a lot of force to loosen them. If you are able, it could be beneficial to have another person assist with this part.
After the screws are removed the latch should pull out of the door with ease. If the latch plate is stuck or refuses to move, use a small hammer to scrape the edges. This will sometimes free the plate up.
Now you can prepare the new strike plate to be installed. Screw the latch plate into the doorjamb using the wood screws that came with your new handles. Be careful not to tighten too much the screws, as this can damage the strike plate.
If you're unsure if the latch plate is in the correct position, try closing and then opening the door to check if it closes and latches correctly. If it doesn't then you'll have to adjust the strike plate either up or down, or even forward or back, until the door closes and latches properly.
If the door still moves or jiggles, you may have to enlarge your latch hole on the strike plate. This is more frequent on older doors. It could be caused by wear and tear hinges that are too narrow, the wrong size latch, or a damaged strike plate. If this is the case, follow the same procedure to adjust the strike plate, but with a metal file instead of the hammer and chisel.
Take off the Latch
The latch is the angled piece of metal that slides between the hole on the inside edge of your door. When you turn the handle, it pushes the latch forward, allowing you to open the door. It also connects to a hole in the door frame to keep the door shut. If your door wobbles when you close, replacing the latch could be all you need to fix the problem.
The screws that hold the door latch are difficult to locate however, you can use a screwdriver to make a small hole in the trim plate and then pry the latch off. After taking off the trim plate you should be able to take off the latch, as well as the bolts that hold it and the spindle that holds it.
If repairmywindowsanddoors.co.uk doesn't easily come out it is suggested to use an old-fashioned paper clip or tool to release it from the handle mechanism. Place the item in the slot for the latch that is recessed. gently twist or jiggle it until you feel the handle and latch start to split. It may take this several times before the latch comes loose enough to pull out.
After the old latch has been removed and the old latch is removed, you should be able to move the new latch into the slot without difficulties. Make sure the latch is correctly positioned in the slot and aligned with the screw chambers and then use your new screws to secure it to the strike plate and door frame.
Before installing the new handle, be certain to measure your existing backset (the distance from the centre of the large hole on the front surface of the door to the edge). Make sure that the size of the latch of the new handle is equal to the measurement.
You'll need a new cylinder for your lock if replacing the latch and handle or your existing one is damaged. If you're not replacing the locks, the new latch will fit in the existing recess and be compatible with your current keys. Make sure you select an entry point with rectangular cover plates that match the handles you have.
Then remove the Cover Plate
You can replace your old door handles with a contemporary design of roses and levers to enhance the appearance of your home. You can buy complete sets of door handles that come with matching escutcheons and privacy adaptor kits.
To replace an internal door handle, remove the cover plate (or rose), which covers the screws and inner mechanism. Find an release tab on the plate, and make use of a flathead screwdriver to pop it off the knob. It may have an opening on one edge or be secured by a pin.
Remove the screw holding the handle in the interior and place it aside when the cover plate has been removed. Remove the screws that secure both the outer and inner plates. You can loosen them by using the help of a Philips Screwdriver. Then, remove the inner plates and latch plate from the door and put them aside.
Most doors have a gap between the door jamb and the inner edge of the frame, which allows for a handle, however not all do. If yours isn't allow for a handle, you'll have to make a hole into the door. The procedure for this is the same procedure opening a door using the lock, however you'll need to take extra care to avoid damaging the door or frame.
Installing new screws for the door knob is necessary after holes have been made. Be sure to purchase the same size as the old ones, to ensure that you won't have a handle that's too tight or too loose. Installing a new latch and strike rod is also mandatory. These are not included in most door handle sets.
If you're looking for a high-quality replacement for your interior door handle set look no further than the Amazon's Choice FAERSI two-piece chrome finish handle set. It's a factory-fit and has received hundreds of 5-star reviews from happy customers. It's a great choice to replace worn or damaged door hardware on your Chevy.