Do You Know How To Explain How To Repair Car Key Lock To Your Boss
How to Repair Car Key Lock Problems
Sometimes, keys for cars can get stuck in the door lock of your vehicle. It could be a simple buildup or something more serious. Luckily, this is an easy fix that you can fix at home.
If you are unable inserting your key in the keyhole of the lock, it's likely that the lock is become jammed. To get it fixed it is possible to apply some lubrication to the keyhole.
1. Lubricate the Keyhole Keyhole
Try lubricating the keyhole. You can use sprays for lubrication, which you can purchase at most hardware stores. Spray it on the lock and then push the key into and out a few times. This could help loosen the mechanism. If it doesn't work, you might need to contact an expert to repair it.
You can also lubricate your lock using graphite powder or graphite spray. This will coat the lock, making it easier to remove and insert. This will also help to clean and lubricate the pins in the lock, which could get clogged with time. Try wiggles on the mechanism. This will probably take some time however, it is a good way to unlock a car lock. If you're armed with an external light source or a flashlight from your phone, you will be able to observe the mechanism better. If you feel like you're making progress, continue moving the lever until the locking and unlocking actions feel smooth.
If the key does not turn, you might need to take it apart and clean the locking mechanism. This isn't a job for everyone, but if you are an avid tinkerer, this could be a fun project. G28 Car Keys can also buy a lubricant specifically designed for locks. This kind of lubricant is more robust than the general-purpose WD-40 and is more effective in loosening a stuck or frozen mechanism.
You can also use an altered wire hanger to gain access to the vehicle lock. This method is not guaranteed to work but may be an alternative if all other methods fail.
If the lock's cylinder is damaged, it might be impossible to open the car door or start the engine. This is a serious issue and requires professional repair or replacement. If you have a spare key, you should use this to start the car until you replace the damaged part. If you don't own a spare key, you could make use of a jigsaw to sever the broken piece of the key.
2. Unlock the Door
It is important that you regularly check the door locks and key mechanism. Cleaning the tumblers of your lock with silicone or graphite sprays will stop debris from clogging them and causing keys to not turn. Alternatively, you can try coating the key with powdered graphite to create an interim fluid. This will allow the key to move around inside the lock. It could work if you have a manual lock, rather than an electronic lock.
If the key is able to be inserted but not turned it is most likely that there is an issue with the lock cylinder. This is a situation that is only fixable by a locksmith. Avoid using forceful entry techniques since they can cause damage to the lock as well as the door.
Another method to open the car that is locked is to use a long metal rod that can be placed inside the lock. This method is best suited to older cars that have traditional mechanical locks, since modern vehicles are designed to be more difficult to crack.
In certain instances the use of a wooden wedge or air wedge could be used to create a gap between the door and window. A screwdriver or metal rod can be then inserted into the gap to make it easier to unlock. This technique isn't easy to master and doesn't guarantee success, as it is dependent on the car's make and model.
In an emergency, you'll need to come up with a plan and take some time. Always keep tools in your vehicle. Roadside assistance services such as AAA provide kits with wire hangers and other tools, and they are useful in times of need. Additionally, local security or police departments usually have small jims that can be used to unlock the vehicle. Make sure you check your insurance policy for autos for any policies that include roadside assistance as well as lockout services.
3. Unlock the Ignition
If your car's keys won't engage in the ignition, this is often due to a simple problem that is easily fixed. First, ensure that the car is in Park before attempting to remove the key. The steering wheel is designed to lock when keys are removed to prevent theft. Some people do not put the key cylinder in Park when they shut off their vehicle. This could cause the wheel to become locked and the key to become stuck in the ignition. If this happens, grab hold of the wheel and jiggle back and forth as you turn the key. If it works, you'll be in a position to start your vehicle as soon as the key is released.
Another reason keys for cars can get stuck in the ignition is that it could have foreign materials inside. Lint from your pocket or tape adhesive or even rust corrosion can cause the pins in the ignition to not line up properly. This can cause the key to not turn when it is placed into the lock. This can be fixed with an easy cleaning using compressed air.
You could also try applying lubrication to the lock mechanism using a silicone-based spray. This will help to remove grease and dirt that frequently cause a car key to be stuck in an ignition. If the lubricant you use does not work, you can call a locksmith for assistance.
If you've purchased a new mechanical key but the ignition still won't turn it could be time to consider bumping the cylinder that controls the ignition. It's a fairly simple procedure that involves spraying WD-40 on the key, inserting it into the ignition, and using the handle of a powerful screwdriver to "bump" the cylinder that holds the key. This usually releases one or two wax wafers that are not aligned that block the ignition from turning. If this doesn't help then you may have to go to an auto mechanic or a service station to purchase a new ignition cylinder.
4. Replace the Key
There may be no alternative but to call locksmiths to fix the lock. However, there are a few things you can do prior to calling someone else.
If the key isn't working it could mean that the lock cylinder is damaged and must be replaced. You can replace the cylinder yourself or request a locksmith to take it off for you. The cost will differ based on the make and model and whether you require a transponder or traditional key.
It's possible that your key is simply worn out. In this scenario, you may be able to grease the keyhole, but it is likely that your key will need replacing. If you own a traditional key, you can get one made at the local hardware store for around $10, but a transponder or smart key may require the services of locksmith.
The key can become bent, causing the lock to jam if you attempt to use the key. You can straighten the key with needle-nosed pliers to fix the problem. Be careful not to apply too much force or pressure, as it can damage the lock mechanism. You can also use WD-40 to grease and unblock the lock.
Also, it's important to note that if your key fob isn't functioning, it could be time to replace the battery. It is possible to purchase replacement batteries online or in the majority of auto shops, however it's worth checking your vehicle's warranty to determine if this is covered under the terms.
If you are unable to start your car and you think the ignition switch may be stuck, locate the VIN number (vehicle ID number) that you'll find on the dashboard of the driver. This will allow you to contact the right people for assistance. You can also contact your dealer or check the website of the manufacturer to learn more about the specifics of your car's problems.