Check Out: How Replacing A Window Handle Is Taking Over The World And What To Do
Tips For Replacing a Window Handle
The replacement of your window handle is a simple task that can be completed from the comfort of your own home. Follow these steps to ensure a smooth and beautiful finish.
Remove the screw covers from your uPVC handle to reveal the screws. Take a measurement of the spindle to be sure you are getting the correct size replacement.
1. Determine the length of the Spindle.
When you're replacing a window handle, it's crucial to determine the size of the spindle right. It can affect the tightness or looseness of the handle as well as whether the handle locks correctly into the window frame. The spindle is a steel shaft that connects the handle to the lock in the window frame. The spindle can be found in the standard 8mm industry cross-section or the older versions of 9mm. The current industry standard is 8mm but this was not always the case, so when buying a new handle it is important to check the measurements.
The easiest way to measure the length of the spindle is to remove the existing handle This can be accomplished by turning it to the open position and unscrewing the two screws (which could be hidden behind plastic caps that will have to be removed) which hold the handle. After removal, you can measure from the base of the handle to the end of the spindle. upvc replacement door handles will give you the measurement required to buy a replacement.
There are a variety of options when it comes time to choose a new window handle. From sleek chrome that can fit in with a modern style, to traditional burnished bronze that looks great in restored Georgian rooms, or even the more traditional Tudor cottages with curled mongoose tail latches. The options are endless but the most important thing to do is choose a style that suits your home.
Espag handles are usually used to uPVC window frames and are always the same size with a 43mm central. Cockspur handles vary between 58mm and 62mm, but luckily there are replacements available for both sizes. Window handles from Cadenza come in a different size due to their bent blade that is used to operate an interlocking mechanism that is multi-point inside the window.
Another aspect to consider when selecting the right window handle is determining what hand you need to use, which is defined by what hand you use to open the door. Inline Espag window handles aren't handed and can be utilized on right or left handed windows. Cranked window handles are only compatible on windows that are open in one direction.
2. Remove the Handle
A window handle that falls out is a frustrating experience, regardless of whether the handle is damaged or worn out. But the good news is that replacing the uPVC window handle is a straightforward task that you can complete yourself. You'll need only the most basic hand tools and time to complete this process.
First, you have to open the window and ensure that it is in the unlocked position. Then, remove the screws that hold the handle in place. After these have been removed, you can start working on the removal of the handle itself.
The handle is attached to a spindle within the window frame. Based on the type the handle is held in place by a screw or pin. The most commonly used types of handles are inline Espagnolette handles and handles with cockspurs. Both these types of handles are utilized on casement windows, as well as windows made of aluminium. The handles can be locked with a key to prevent unauthorised access from the outside. Or you can lock the handles by turning them clockwise.
To remove the handle, you will need a flat-bladed screwdriver. Once the clip is released, the handle will be able to slide off the spindle. Once the old handle is removed, you will have to determine the length of the spindle in order to make sure that the new handle is compatible with this measurement.
Once you have decided on the proper size for the handle, screw it in place. It is essential to make sure that the handle is securely attached and rotates in the proper direction (clockwise when the handle is open and counterclockwise if handle closes). It is crucial to make sure that the handle hasn't been installed upside down.
Replace the cap screws. After you have completed this step, you should test the handle to make sure it is working correctly. You can also test the locking mechanism by shifting the handle from the unlocked position to the locked one and back.
3. Take off the Screws
A uPVC window handle is an essential element of any home and is often the first item to show signs of wear and tear or damage. This can be due to natural factors, regular use, or even damage caused by criminals looking to gain access to your home. However, a simple repair will solve the issue and stop the issue from occurring again.
uPVC handles may also be difficult to remove if the locking mechanisms aren't functioning properly. Most of the time, the issue can be resolved by replacing the multipoint lock instead of the entire handle. It's certainly worth checking this because it could save you money.
After you have removed the handle, you'll have to remove the screws that held it in place. The screws are typically located on the inside of the base of the handle. You may need to use a screwdriver for this and it's crucial that you don't over tighten as this can cause the handle to become loose.
You'll then have to locate the fixing pins or screws that hold the new handle in the correct position. They will likely be located on the inside face of the base of the handle. you'll need a screwdriver or a pair of pliers in order to remove the screws. If you want to, you can replace the caps on the screw and test the handle to make sure it works properly.
Install the handle by aligning the spindle to the window's cutout mechanism. Then screw it into. If you want to replace the screw covers ensure that the handle is in a position that is open and that any screws are securely fixed. It's done! You can enjoy your newly installed window handle. This will hopefully help you avoid costly door and window replacements in the future. If you would like assistance with this or any other aspect of your uPVC windows don't hesitate to get in touch with us.
4. Install the new handle
Whether you're replacing a broken handle or simply making it more modern the process is simple and can be completed in a matter of a few steps. The most important thing is to identify the type of handle, measure its spindle, and determine what tools you'll need to complete the task. Safety is always the primary priority when working with windows and tools. Take your time to follow the steps and make sure that you have an appropriate handle to use.
To begin, find the screws that hold your window handle in place. Take them off while firmly gripping the handle to stop it from falling down and causing injury. After the screws have been removed and repositioned, they can be put in a safe place to be replaced in the future.
Once the old handle is removed, you can now begin fitting the new one. It is essential that the handle fits perfectly to ensure it works properly and locks the window in its place. The next step is to slide the square metal bar to the back of the handle into the hole of the window mechanism, making sure it fits securely.
The final step is to replace the screws caps and then test the handle to ensure it is working. If you are not satisfied with the results or if your window does not shut or open properly contact our experts for assistance.
Most homes in the UK have uPVC windows. As such, many of them will require to be replaced in the near future due to wear or breakage. Anyone with some DIY knowledge can accomplish the task. The most important factor in the success of the process is making sure you're using a handle that matches the window's size and design. Contact us if are unsure of the type of handle you need. They'll be able to guide you through the options.