Changelog 6.47beta8 (testing)

- console: fixed "clear-history" restoring historic actions after power cycle

- console: removed "edit" and "set" actions from "System/History" menu

- crs3xx: fixed "ingress-rate" property on CRS309-1G-8S+, CRS312-4C+8XG, CRS326-24S+2Q+ devices

- defconf: fixed default configuration loading after fresh install (introduced in v6.46)

- dhcpv6-client: improved error logging when when renewed address differs

- fetch: fixed "User-Agent" usage if provided by "http-header-field"

- health: fixed health reporting on OmniTIK 5 PoE ac

- health: improved health reporting on CCR1072-1G-8S+

- ipsec: improved system stability when processing decrypted packet on unregistred interface

- l2tp: improved system stability when disconnecting many clients at once

- lora: improved confirmed downlink forwarding

- lte: do not reset modem when setting the same SIM slot on LtAP

- lte: fixed multiple APN reactivation after deactivation by operator

- lte: show SIM error when no card is present

- netinstall: removed "Flashfig" from Netinstall

- netinstall: removed "Make Floppy" from Netinstall

- netinstall: signed netinstall.exe with Digital Signature

- ppp: prioritize "remote-ipv6-prefix-pool" from PPP secret over PPP profile

- snmp: added "dot1qTpFdbTable" OID reporting for Q-BRIDGE-MIB

- snmp: fixed "dot1dBasePort" index offset for BRIDGE-MIB

- snmp: fixed health related OID polling (introduced in v6.46)

- snmp: improved stability when polling MAC address related OID

- supout: fixed autosupout.rif file generation (introduced in v6.46)

- w60g: use "arp" and "mtu" parameters from master interface when creating a new station

- winbox: added "auto-erase" option to "Tool/SMS" menu

- winbox: fixed "allowed-number" parameter setting invalid value in "Tool/SMS" menu

- winbox: show "LCD" menu only on boards that have LCD screen

- wireless: improved compatibility by adding default installation mode and gain for devices with integrated antennas

- wireless: improved compatibility for Switzerland wireless country profile to improve compliance with ETSI regulations

⚠️ lora: added support for LoRaWAN low-power wide-area network technology for MIPSBE, MMIPS and ARM

⚠️ package: accept only packages with original filenames (CVE-2019-3976)

⚠️ package: improved package signature verification (CVE-2019-3977)

⚠️ security: fixed improper handling of DNS responses (CVE-2019-3978, CVE-2019-3979)

- backup: fixed automatic backup file generation when configuration reset by button

- backup: store automatically created backup file in "flash" directory

- bonding: correctly remove HW offloaded bonding with ARP monitoring

- bonding: properly handle MAC addresses when bonding WLAN interfaces

- bridge: disable/enable bridge port when setting bpdu-guard

- bridge: do not add bridge as untagged VLAN member when frame-types=admit-only-vlan-tagged

- bridge: do not add dynamically VLAN entry when changing "pvid" property for non-vlan aware bridge

- bridge: include whole VLAN-id in DHCP Option 82 message

- btest: removed duplicate "duration" parameter

- capsman: fixed background scan showing incorrect regulatory domain mismatch error (CAP upgrade required)

- capsman: fixed channel auto reselection

- capsman: fixed MAC address detection for "common-name" parameter in certificate requests

- capsman: improved DFS channel switching when radar detected

- capsman: improved radar detection algorithm

- ccr: improved general system stability

- certificate: added progress bar when creating certificate request

- certificate: added support for certificate request signing with EC keys

- certificate: allow specifying "file-name" parameter for export (CLI only)

- certificate: allow specifying "name" parameter for import (CLI only)

- certificate: improved CRL updating process

- certificate: removed "key-size" parameter for "create-certificate-request" command

- chr: added support for Azure guest agent

- console: added bitwise operator support for "ip6" data type

- console: fixed "address" column width when printing DHCPv4 leases

- console: fixed IP conversion to "num" data type

- console: fixed "tobool" conversion

- console: properly detect IPv6 address as "ip6" data type

- crs1xx/2xx: allow to set trunk port as mirroring target

- crs3xx: correctly handle L2MTU change

- crs3xx: do not send pause frames when ethernet "tx-flow-control" is disabled on CRS326/CRS328/CRS305 devices

- crs3xx: improved interface initialization

- crs3xx: improved switch-chip resource allocation on CRS317-1G-16S+, CRS309-1G-8S+, CRS312-4C+8XG, CRS326-24S+2Q+ devices

- crs3xx: improved system stability on CRS309-1G-8S+, CRS312-4C+8XG, CRS326-24S+2Q+ devices

- crs3xx: remove previously set mirror-source property before changing it

- defconf: fixed default configuration loading on RBmAPL-2nD (introduced in v6.45)

- defconf: require "policy" permission to print default configuration

- dhcpv4-client: allow empty "dhcp-options" parameter when adding new client

- dhcpv4-client: fixed "dhcp-options" parameter setting when adding new client

- dhcpv4-server: improved stability when RADIUS Interim update is sent

- dhcpv6-client: fixed timeout when doing rebind

- dhcpv6-client: properly update bind time when unused prefix received from the server

- dhcpv6-client: properly update IPv6 address on rebind

- dhcpv6-server: fixed logged error message when using "address-pool=static-only"

- dhcpv6-server: ignore prefix-hint from client's DHCPDISCOVER if static prefix received from RADIUS

- dhcpv6-server: include "User-Name" parameter in accounting requests

- dhcpv6-server: made "calling-station-id" contain MAC address if DUID contains it

- dot1x: added "reject-vlan-id" server parameter (CLI only)

- dot1x: added support for dynamic switch rules from RADIUS

- dot1x: added support for "mac-auth" authentication type (CLI only)

- ethernet: automatically detect interface when using IP address for power-cycle-ping

- ethernet: do not enable interface after reboot that is already disabled

- ethernet: send requests only from ethernet interface when using MAC address for power-cycle-ping

- export: always export "ssid" value for w60g interfaces

- fetch: do not allocate extra 500KiB on SMIPS

- fetch: improved stability when processing large output data

- gps: use "serial1" as default port on RBLtAP-2HnD

- hotspot: fixed non-local NAT redirection to port TCP/64873

- hotspot: fixed RADIUS CoA "address-list" update

- ike1: fixed minor spelling mistake in logs

- ike2: improved CHILD SA rekey process with Apple iOS 13

- ike2: improved stability when retransmitting first packet as responder

- ipsec: added "error" topic for identity check failure logging messages

- ipsec: fixed DNS resolving when domain has only AAAA entries

- ipsec: fixed policy "sa-src-address" detection from "local-address" (introduced in v6.45)

- ipv6: changed "advertise-dns" default value to "yes"

- led: fixed default LED configuration for RBLHG-2nD and RBLHG-5HPnD

- log: increased log message length limit to 1024 characters

- lte: added support for D402 modem

- lte: added support for LM960A18

- lte: added support for Telit LM960 and LE910C1 modems

- lte: do not allow setting 3G and GSM modes on LTE only modems

- lte: fixed band setting on R11e-4G

- lte: fixed network registration on R11e-LTE-US

- lte: fixed Sierra WP7601 driver loading

- lte: fix "operator" names not being displayed properly

- lte: improved modem initialization

- lte: show "primary-band" only for LTE modems

- lte: use /128 prefix for IPv6 address on LTE interface

- lte: use interface from RA when "ipv6-interface=none" and IPv6 enabled

- ppp: added 3GPP IoT "access-technology" definitions

- ppp: added support for Sierra WP7601

- ppp: disable DTR send when using at-chat

- quickset: added "LTE AP Dual" mode support

- quickset: added "LTE APN" dropdown support

- quickset: fixed "LTE Band" checkbox display

- route: fixed area range summary route installation in VRF

- routerboard: fixed default CPU frequency on RB750r2 ("/system routerboard upgrade" required)

- routerboard: fixed USB configuration export on RBLtAP-2HnD

- routerboard: hide "memory-frequency" parameter for RBLtAP-2HnD

- sniffer: allow filtering by packet size

- snmp: added "disabled" and "comment" parameters for communities

- snmp: added option to monitor "link-downs" parameter using MIKROTIK-MIB

- snmp: fixed "dot1dBasePort" index offset for BRIDGE-MIB

- snmp: fixed "ifLastChange" OID reporting for IF-MIB

- snmp: fixed "radio-name" (mtxrWlRtabRadioName) OID support

- snmp: improved interface status reporting for IfOperStatus OID

- snmp: improved LLDP interface returned index and type

- snmp: return only interfaces with MAC addresses for LLDP

- snmp: use "src-address" also for traps

- ssh: fixed output printing when "command" parameter used

- supout: include information from all LTE interfaces

- supout: removed "file" option from "/system sup-output" command

- switch: added "comment" property for switch vlan menu (CLI only)

- switch: correctly update dynamic switch rule when dhcp-snooping is enabled

- switch: ignore "default-vlan-id" property after switch reset on RTL8367 switch chip

- switch: show "external" flag for bridge hosts on MT7621, RTL8367 switch chips

- timezone: updated time zone database to version 2019c

- tr069-client: added CellDiagnostics parameter support

- tr069-client: added LTE band and cellular technology selection parameters

- tr069-client: added LTE RSCP, ECNO and ICCID parameter support

- tr069-client: added multiple LTE monitoring parameters

- tr069-client: reconnect to ACS when "ConnectionRequestURL" is updated

- upgrade: improved auto package updating using "check-for-updates"

- ups: improved compatibility with APC UPS's

- usb: general USB modem stability improvements

- userman: updated Authorize.Net to use SHA512 hashing

- w60g: added "region" setting to limit allowed frequencies (CLI only)

- w60g: do not reset link when changing comment on station

- w60g: fixed "monitor" command on disabled interfaces

- w60g: move stations to new bridge when "put-in-bridge" parameter is changed

- webfig: fixed link to Winbox download

- winbox: added "ip-address" and stats columns in "IP/Kid-Control/Devices" menu

- winbox: added "public-address-ipv6" parameter to "IP/Cloud" menu

- winbox: added "reset-counters" button to "IP/Kid Control/Devices" menu

- winbox: added "tx-info-field" parameter to "Wireless/W60G" menu

- winbox: added "Vendor Classes" tab in "IP/DHCP Server" menu

- winbox: added wireless alignment LED types to "System/LEDs" menu

- winbox: fixed allowed range for bridge filter "new-priority" parameter

- winbox: fixed "CAPs Scanner" stopping

- winbox: fixed "cluster-id" parameter setting in "Routing/BGP/Instances" menu

- winbox: fixed file locking when uploading multiple files at once

- winbox: fixed firewall limit parameter support for rates more than 4G

- winbox: fixed invalid flag presence in "IP/SMB/Shares" menu

- winbox: fixed "Routing" menu icon presence when there is no routing package installed

- winbox: improved stability when transfering multiple files between multiple windows

- winbox: properly show timestamp in file "Creation Time" field

- winbox: removed "Set CA Passphrase" button from "Certificate" menu

- winbox: renamed "Queue Limit" to "Queue Size" for "pcq-upload-default" and "pcq-download-default" parameters

- winbox: replaced "kb" with "KiB" in "Tools/Packet Sniffer" menu

- winbox: show "Switch" menu on RBwAPGR-5HacD2HnD

- winbox: show "System/RouterBOARD/Mode Button" on devices that have such feature

- wireless: added 4 chain MCS support for 802.11n wireless protocol (CLI only)

- wireless: added "ETSI" regulatory domain information

- wireless: added "indonesia4" regulatory domain information

- wireless: added "push-button-5s" value for "wps-mode" parameter

- wireless: added U-NII-2 support forRBSXTsqG-5acD, RBLHGG-5acD-XL, RBLHGG-5acD, RBLDFG-5acD, RBDiscG-5acD

- wireless: allow using "canada2" regulatory domain on US lock devices

- wireless: fixed 802.11n rate selection when managed by CAPsMAN

- wireless: fixed RX chain selection

- wireless: fixed sensor MAC address reporting in TZSP header

- wireless: improved 802.11ac stability for all ARM devices with wireless

- wireless: improved IPQ4019, QCA9984, QCA9888 wireless interface stability

- wireless: updated "ukraine" regulatory domain information

- wireless: updated "united-states" regulatory domain information

---