Buying weed online in Ruda Slaska

__________________________

📍 Verified store!

📍 Guarantees! Quality! Reviews!

__________________________

▼▼ ▼▼ ▼▼ ▼▼ ▼▼ ▼▼ ▼▼

▲▲ ▲▲ ▲▲ ▲▲ ▲▲ ▲▲ ▲▲

Buying weed online in Ruda Slaska

This consultation is currently unavailable. Please try again later or contact us. Skip to Main Content. Consultation Unavailable This consultation is currently unavailable.

All URBACT articles

Buying weed online in Ruda Slaska

Acts whose titles are printed in light type are those relating to day-to-day management of agricultural matters, and are generally valid for a limited period. The titles of all other Acts are printed in bold type and preceded by an asterisk. The Council has provided, where practically possible, all the persons, groups and entities with statements of reasons explaining why they were entered into the list. By way of a notice published in the Official Journal of the European Union , the Council informed the persons, groups and entities on the list that it had decided to keep them thereon. When carrying out that review, the Council took into account the observations submitted to it by those concerned as well as the updated information received from the competent national authorities on the status of listed individuals and entities at the national level. This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union. This Regulation shall be binding in its entirety and directly applicable in all Member States. This Regulation shall enter into force on the date following that of its publication in the Official Journal of the European Union. The measures provided for in this Regulation are in accordance with the opinion of the Standing Committee on biocidal products,. This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union. Interox Biocidal Product Family 1. Product type 2 - Disinfectants and algaecides not intended for direct application to humans or animals Disinfectants. Product type 3 - Veterinary hygiene Disinfectants. Product type 4 - Food and feed area Disinfectants. Authorisation number: EU R4BP asset number: EU PT02 - Disinfectants and algaecides not intended for direct application to humans or animals Disinfectants. R4BP asset number. Manufacturer s of the biocidal products. Manufacturer s of the active substance s. Qualitative and quantitative information on the composition of the family. Suffix to the authorisation number. Qualitative and quantitative information on the composition of the meta SPC 1. Type s of formulation of the meta SPC 1. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Remove contact lenses, if present and easy to do. Continue rinsing. Table 1. Use 1 — Surface disinfection of closed spaces by aerosolised hydrogen peroxide. Treatment time depends on machine type, size of room or area of surfaces to be disinfected. Use-specific instructions for use. Rooms may be dehumidified to achieve higher hydrogen peroxide concentrations on surfaces. Remove barriers that may hinder aerosolized product from reaching the surfaces to be disinfected. The disinfected surfaces should be non-porous and cleaned before application of the product. The product is not intended to be used on surfaces that may come into contact with food or feeding stuffs. The user should carry out a microbiological validation of the disinfection in the rooms to be disinfected or in a suitable 'standard room', if applicable with the devices to be used, after which a protocol for disinfection of these rooms can be made and used thereafter. Each device or specific installation is systematically validated when it is set up. The optimal operating conditions are validated on site temperature, hygrometry, product to be used, diffusion time, extraction time, etc. Besides biological validation chemical validation should be performed. Efficacy of room disinfection was demonstrated according to norm NF T by nebulization of 1 g of hydrogen peroxide per cubic meter of room volume in 22 min followed by min contact time at room temperature. Volume of disinfected space should be 30 - m 3. Use-specific risk mitigation measures. Seal the treatment enclosure e. Ensure all personnel have vacated the treatment enclosure prior to application. Remove all plants, animals, beverages and food. Re-entry is only permitted once the air concentration has dropped below the reference value 1. After the application, the room must be ventilated, preferably by mechanical ventilation. The duration of the ventilation period has to be established by measurement with suitable measurement equipment. In case of the room has to be entered when the hydrogen peroxide concentration is still above 1. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment. Where specific to the use, the instructions for safe disposal of the product and its packaging. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage. Risk mitigation measures. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment. Particulars of likely direct or indirect adverse effects :. In case of inhalation: Breathing difficulties, cough, pulmonary oedema, nausea, vomiting. In case of eye contact: Redness, lachrymation, swelling of tissue, severe burns. In case of ingestion: Nausea, abdominal pain, bloody vomiting, diarrhoea, suffocation, cough, severe shortness of breath, severe burns of the mouth and throat, as well as a danger of perforation of the oesophagus and the stomach. Risk of respiratory disorder. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Continue rinsing for at least 15 minutes. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Emergency measures to protect environment in case of accident:. Should not be released into the environment. If the product contaminates rivers and lakes or drains inform respective authorities. Dilute with plenty of water. Dam up. Do not mix waste streams during collection. Soak up with inert absorbent material. Keep in properly labelled containers. Keep in suitable, closed containers for disposal. Never return spills in original containers for use. Instructions for safe disposal of the product and its packaging. Do not allow undiluted product to enter the sewer. Do not discharge unused product on the ground, into water courses, into pipes sink, toilets… nor down the drains. Disposal of packaging should at all times comply with the waste disposal legislation and any regional local authority requirements. Conditions of storage and shelf-life of the product under normal conditions of storage. Storage: Hydrogen peroxide should be stored in properly designed bulk storage tanks or in original vented container in upright position away from incompatible products. Use only approved materials of construction for equipment or approved packs. Store in a cool, ventilated area and protect from damage and direct sunlight. Keep away from combustible materials and sources of ignition and heat. Please be aware of the European reference value of 1. Trade name s , authorisation number and specific composition of each individual product. Qualitative and quantitative information on the composition of the meta SPC 2. Type s of formulation of the meta SPC 2. Dispose of contents to Table 2. Industrial — pharmaceutical industry or cosmetics industry, for example clean rooms. In case the room has to be entered when the hydrogen peroxide concentration is still above 1. Table 3. Use 2 — Surface disinfection of enclosures in filling isolators by aerosolised or vaporised hydrogen peroxide VHP. Industrial — aseptic chambers in aseptic filling applied in pharmaceutical or cosmetics industry. Automated, non-directed aerosolization e. Filling isolators may be dehumidified to achieve higher hydrogen peroxide concentrations on surfaces. The user should carry out a microbiological validation of the disinfection in the enclosures to be disinfected with the devices to be used, after which a protocol for disinfection of these enclosures can be made and used thereafter. Efficacy of use against bacterial spores was demonstrated by flash evaporation of hydrogen peroxide at a rate of 0. Particulars of likely direct or indirect adverse effects:. Never return spills in original containers for re-use. Qualitative and quantitative information on the composition of the meta SPC 3. Type s of formulation of the meta SPC 3. Rinse skin with water. Table 4. Table 5. Qualitative and quantitative information on the composition of the meta SPC 4. Type s of formulation of the meta SPC 4. Dispose of contents to …. Table 6. Use 1 — Disinfection of polyethylene terephthalate food packages by vaporised hydrogen peroxide VHP. Number and timing of applications as required by user. Machines typically operate up to hours per week. HDPE packaging: 0. Follow machine operating instructions for disinfection period, extraction of hydrogen peroxide and re-entry. Prevent entry during disinfection process. Disinfection performance of each packaging machine should be validated using biological and chemical indicators. During operation, ensure adequate ventilation along the machines LEV and in the industrial halls technical ventilation. During manual maintenance tasks, ensure adequate ventilation inside the machine LEV before opening the doors of the aseptic area. Use only in closed aseptic packaging machines with no emission to water and negligible emission to air. Hydrogen peroxide emission to air should be controlled by the machine e. Qualitative and quantitative information on the composition of the meta SPC 5. Type s of formulation of the meta SPC 5. Table 7. Use 1 — Disinfection of food packaging material aseptic packaging by immersion or aerosolised or vaporised hydrogen peroxide VHP. Automated immersion of packaging material into bath of heated product in aseptic filling machine. Automated vaporisation or aerosolisation of product in sealed area in aseptic filling machine. Product consumption in vapour and aerosol applications 0. Immersion: immerse clean packaging material in undiluted product according to packaging machine operating instruction Disinfection efficacy is determined by immersion time and temperature and packaging material. Vaporization: vaporize and apply undiluted product to clean packaging material according to packaging machine operating instructions. Suitable packaging materials included paperboard, polyethylene terephthalate, polystyrene and aluminium. The product shall only be transferred in closed pipes after mixing and loading. Open product and waste water flows are not allowed. Workplace release measurements with suitable measurement equipment shall be performed upon implementation of the aseptic packaging plant, at regular intervals annual intervals recommended and after any change in relevant boundary conditions. The national regulations for workplace measurements have to be followed. In case of maintenance of the aseptic packaging plant e. The type of RPE and the filter type code letter, colour are to be specified by the authorisation holder within the product information. Glove material to be specified by the authorisation holder within the product information. Aerosolised or vaporised application should be use only in closed aseptic packaging machines with no emission to water and negligible emission to air. Table 8. Use 2 — Disinfection of closed areas in aseptic packaging machines by aerosolised and vaporised hydrogen peroxide VHP. Automated vaporisation or aerosolization in closed areas in aseptic filling machines. From to mL product required for one disinfection cycle. Minimum contact time 7 minutes starting from beginning of application. Follow machine operating instructions for disinfection period, volume of disinfectant extraction of hydrogen peroxide and re-entry. Qualitative and quantitative information on the composition of the meta SPC 6. Type s of formulation of the meta SPC 6. Table 9. Use 1 — Disinfection of distribution and storage systems for drinking water. Dilute the product to reach the needed hydrogen peroxide concentration stated below. Each product label should give information on how the dilution should be made, e. Apply diluted product at room temperature on pre-cleaned surfaces. Add as aqueous solution to pipes as needed for flooding. Spray application to tanks until run-off. Surface need to be wet with disinfectant for the allocated contact time. The processes must be fully automated and enclosed with no exposure in the case of tanks or piping systems. Rinse well with potable water. Table Use 2 — Surface disinfection in food and feed processing by liquid application. Disinfection of equipment, containers, consumption utensils, surfaces or pipework associated with the production, transport, storage or consumption of food or feed for humans and animals. CIP cleaning-in-place : volume of diluted product needed to fill the system to be disinfected. CIP cleaning in place disinfection terminal disinfection after cleaning — pipes, tanks, mixer, other machine which comes into contact with food. Soaking of pre-cleaned items — dishes, cutlery, equipment, small machinery, machine items, crates, boxes. Rinse well with potable water and allow to drain or dry with hot air. In the case of automated spraying of surfaces such as conveyors or other fixed installations workers must leave the room before processing. Disinfection can only be processed after the end of a shift with all workers having left the room. The process must be started from outside the room. Warning notices indicating that entry is denied and temporary barriers must be placed on all entries. Air concentrations must be monitored to ensure that no leakage occurs during operations. For re-entry, the undercut of AECinhalation of 1. Wear protective chemical resistant gloves during product handling phase glove material to be specified by the authorisation holder within the product information. If no LEV, use respiratory protective equipment RPE providing a protection factor of 20 in loading and 5 for immersion. After use, immersion baths must be emptied or covered to prevent further evaporation. The waste water from breweries should not be discharged direct to surface water after simple on-site treatment. The waste water from breweries should be discharged to the sewer connected to the sewage treatment plant STP. Qualitative and quantitative information on the composition of the meta SPC 7. Type s of formulation of the meta SPC 7. Air concentrations must be monitored to ensure that no leakage occurs during operations and levels are safe before entering the area. Qualitative and quantitative information on the composition of the meta SPC 8. Type s of formulation of the meta SPC 8. Use 1 — Surface disinfection by liquid application in industrial and institutional areas. CIP cleaning-in-place : volume of diluted product needed to fill the disinfected system. Surface needs to stay wet for the allocated contact time. Immerse instruments in diluted product for the allocated contact time. Allow to drain and dry. Use 2 — Disinfection of surfaces associated with animal housing by spraying. Disinfection of non-porous materials and surfaces associated with the housing of animals. Remove animals from spaces to be disinfected. Precleaning of surfaces required before using disinfectants. During the operation worker must leave the area and access must be denied by appropriate barriers or locked doors. After operation efficient ventilation 10 ACH must be used to reach a safe level. During this period access must also be denied. Use of respiratory protective equipment RPE providing a protection factor of 10 is mandatory. Only operators wearing the specified RPE should be present while spraying or fumigating. The operator must walk backward towards the exit while spraying the surfaces so always walking away from sprayed areas. Efficient ventilation 10 ACH must be used during spraying and access must be denied by appropriate barriers and notices. Also after operation efficient ventilation 10 ACH must be used to reach a safe level. No secondary exposure is expected because of rapid decomposition of hydrogen peroxide. Qualitative and quantitative information on the composition of the meta SPC 9. Type s of formulation of the meta SPC 9. Efficient ventilation 10 ACH must be used during spraying and access must be denied by appropriate barriers and notices, Also after operation efficient ventilation 10 ACH must be used to reach a safe level. Do not discharge unused product on the ground, into water courses, into pipes sink, toilets… nor down the drains.. However, the countervailing duty is not subject to this reinvestigation. Request for an absorption reinvestigation and initiation. The applicants have submitted sufficient evidence showing that after the original investigation period, Egyptian export prices have decreased. The decrease in Egyptian export prices has seemingly impeded the intended remedial effects of the measures in force. The evidence contained in the request indicated that the decrease in export prices cannot be explained by a decrease of the price of the major raw material and other costs or by a change in the product mix. Reopening of the anti-dumping investigation. In the Notice of Reopening, the Commission invited interested parties to contact it in order to participate in the reinvestigation. In addition, the Commission specifically informed the applicants, exporting producers and importers known to be concerned and the authorities of the country concerned about the absorption reinvestigation and invited them to participate. Sampling of exporting producers in the country concerned to be reinvestigated. In order to enable the Commission to decide whether sampling in accordance with Article 17 of the basic Regulation would be necessary in respect of the producers in the country concerned, those parties were requested to make themselves known and to provide the Commission with the information requested in the Notice of Reopening. However, since only Jushi Egypt and Hengshi Egypt came forward, sampling was not necessary. Sampling of unrelated importers. In order to decide whether sampling was necessary and, if so, to select a sample, the Commission asked unrelated importers to provide the information specified in the Notice of Reopening. None of the unrelated importers came forward and sampling was therefore not necessary. Replies to the questionnaires and verifications. The Commission sought all the information deemed necessary for the purpose of this reinvestigation. The Commission therefore cross-checked remotely all the information deemed necessary of these three companies for its determinations in line with its Notice on the consequences of the COVID outbreak on anti-dumping and anti-subsidy investigations 6. Period covered by the absorption reinvestigation. Comments on initiation. The GoE claimed i that under WTO previsions no such review is provided for; ii that Article 12 3 of the basic Regulation would be incompatible with Article 9. ADA insofar as a lower duty cannot be imposed as a result of such reinvestigation and iii that measures imposed following a reinvestigation in accordance with Article 12 of the basic Regulation would also not fall within the exceptions granted by Article XX d of the GATT The GoE also submitted that in contrast with the obligations under Article 11 3 of the ADA a reinvestigation in accordance with Article 12 of the basic Regulation does not require an investigation of injury. The Commission noted that the fact that ADA does not explicitly provide for the possibility to review the dumping margin to take into account the absorption of anti-dumping duties does not mean that such a review would be WTO inconsistent. On the contrary, such review focuses on the dumping margin determination to ensure that the level of duties can adequately eliminate the effects of injurious dumping and is therefore warranted under Articles As regards the claim on Article 12 3 of the basic Regulation, it is noted that the present reinvestigation did not establish a lower dumping margin on imports of GFF from Egypt. The claim is therefore immaterial. Concerning the requirement that the investigation should cover both dumping and injury, unlike reviews under Article 11 3 , Article 12 is limited to reinvestigating the dumping margins only. In any event, in the present investigation the Commission did review the injury elimination level in order to fully comply with the relevant rules concerning the level of the duty. The GoE also claimed that the measures in force had the intended remedial effect and that significant decrease in the volume of GFF imports between and proved the absence of absorption practices by the exporters. In its response to the final disclosure, GoE restated its argument that the Commission did not objectively examine the volume of the dumped imports and the effect of such imports on prices in the Union market for like products. First, Article 12 of the basic Regulation does not prevent the Commission from conducting absorption reinvestigation and from possibly increasing the antidumping measures in the event of decreasing imports from the country concerned. Second, changes in import volumes, as such, do not constitute or influence the absorption of anti-dumping duties in terms of changes in export prices. Third, while the imports of GFF into the Union decreased after the imposition of the anti-dumping duties, they remain sizeable and, as a matter of fact, one of the two exporting producers doubled its exports to the Union in the AIP. Hence, this claim is rejected. In this respect, the Commission noted the following. Therefore, the claim raised by Vestas is rejected. Furthermore, Vestas argued that that imposing or increasing anti-dumping duties on GFF is directly contrary to the interest of the Union. It is noted that the current reinvestigation is limited to the determination whether export prices have decreased or whether there has been no movement, or insufficient movement, in resale prices or subsequent selling prices in the Union of the product under investigation since the imposition of the original measures and subsequently, if applicable to recalculate the dumping margin based on the re-assessed export prices. Therefore, the claim is dismissed. The absorption reinvestigation pursuant to Article 12 of the basic Regulation aims at establishing whether or not export prices have decreased or whether there has been no movement, or insufficient movement, in resale prices or subsequent selling prices in the Union of the product under investigation since the imposition of the original measures. As a second step, if it is concluded that the measure should have led to movements in such prices, then, in order to remove the injury previously established in accordance with Article 3 of the basic Regulation, export prices shall be reassessed in accordance with Article 2 of the basic Regulation and dumping margins shall be recalculated to take account of the reassessed export prices. Decrease of export prices. In this case, both exporting producers exported to the Union either directly to independent customers or through related companies and the Commission analysis focused accordingly on the evolution of export prices in the AIP as compared to the OIP. When establishing whether there was a decrease in export prices, the Commission established for each examined company its cost, insurance and freight CIF export prices at the Union custom border during the AIP and compared these prices to the corresponding export prices determined in the OIP. The Commission compared for each of the exporting producer the prices of the product types sold in the AIP with the same product types sold in the OIP and calculated for them the weighted average price difference. Therefore, dumping margins were recalculated, according to Article 2 of the basic Regulation. After having established possible absorption for CNBM group, the dumping margin was recalculated, according to Article 2 of the basic Regulation. With respect to the export prices, the export prices for the AIP, collected and verified or cross-checked in the framework of this reinvestigation were used, pursuant to Article 12 2 of the basic Regulation. In this case, both related exporting producers exported to the Union either directly to independent customers or through related companies, established in Hong Kong or the Union. Where the exporting producers exported the product under investigation directly to independent customers in the Union, the export price was the price actually paid or payable for the product under investigation when sold for export to the Union, in accordance with Article 2 8 of the basic Regulation. Where the exporting producers exported the product under investigation to the Union through a related company acting as an importer, the export price was established on the basis of the price at which the imported product was first resold to independent customers in the Union, in accordance with Article 2 9 of the basic Regulation. Normal values as established in the original investigation are used for the calculation of dumping margins during the AIP, unless revision of the normal value taking into account changes in the AIP is requested under Article 12 5 of the basic Regulation. In the present case, the exporting producers did not request a revision of the normal value. Therefore, the normal values used to recalculate the dumping margin in this case are the ones established in the original investigation. Normal value for those two products was therefore replaced by the normal value for the most closely resembling product types sold by Hengshi Egypt in the original investigation. Hengshi Egypt claimed in its reply to the final disclosure that for one of the product types, it is inappropriate to use the normal value from the OIP, given that such product type was only made as part of a trial production and sold in a small quantity as a sample. Instead, Hengshi Egypt suggested that the normal value from the OIP for another, allegedly nearest product type be used. First, it is noted that the original investigation established that the product type in question was produced for commercial use and the normal value for the said product type was duly established and used for dumping margin calculation in the OIP. None of these determinations were contested by Hengshi Egypt in the original investigation. Second, using arbitrarily a normal value for a different product type, while the established and previously uncontested normal value for the matching product type is available would be unfounded. The statements made by the company following the final disclosure could also not be verified. The Commission therefore maintains that the normal value for the product type produced and commercially sold in the OIP albeit in limited quantities and corresponding to the product type sold to the Union in the AIP is the closest and most reliable proxy to be used for dumping calculations in this case. In addition, although Hengshi Egypt could have requested a revision of the normal value based on Article 12 5 of the basic Regulation, if it considered that changes in normal values occurred in the AIP that merited re-examination, it did not do so. Nevertheless, while Article 12 5 of the basic Regulation allows for an en bloc revision of the normal value, it does not allow for a selective reassessment for only one or a few select product types. In light of the above, the claim raised by Hengshi Egypt has to be rejected. In response to the final disclosure, Jushi Egypt disagreed to treat both Jushi Egypt as well as Hengshi Egypt jointly for the purposes of applying Article 12 5 of the basic Regulation on revision of normal values. Jushi Egypt suggests that the Commission should have accepted its individual request for reassessment of the normal value. In conclusion, Jushi Egypt argues that therefore its export prices were not absorbed and consequently neither the export prices of the CNBM group. Moreover, according to Jushi Egypt, the single dumping margin for the company group should have been based on the revised dumping margin for Jushi Egypt and the original dumping margin for Hengshi Egypt. Second, it is recalled that the CNBM group explicitly stated that it would not seek revision of the normal value for their related exporting producers, Jushi Egypt and Hengshi Egypt. The Commission subsequently proceeded, in accordance with Article 12 of the basic Regulation, with recalculating the dumping margins based on the normal values from the OIP. Third, pursuant to Article 9 5 , second subparagraph of the basic Regulation, suppliers with existing structural and corporate links may be considered as a single entity for the purpose of specifying the antidumping duty. This implies that a uniform approach at the level of the group of related producers is to be adopted also in applying Article 12 5 and in conducting absorption reinvestigations. Otherwise, disparate approaches applied to individual exporting producers belonging to the same group already at preliminary stages of absorption reinvestigations could result in a distorted outcome of the reinvestigations and situations, where the exporting producers escape application of increased antidumping duties. It is further noted with regards to the treatment of Jushi Egypt and Hengshi Egypt as pertaining to the same corporate group that the approach taken by the Commission in this reinvestigation is fully consistent with the approach adopted in the original investigation. The Commission compared the normal value and the export price of the two cooperating exporting producers on an ex-works basis. Adjustments in this case were made for transport, insurance, handling, loading costs, credit cost and bank charges. Therefore, an adjustment under Article 2 10 i was also made for sales through that related trading company in line with the original investigation. In order to establish the dumping margin for the two cooperating exporting producers, the Commission compared the weighted average normal value of each type of the like product with the weighted average export price of the corresponding type of the product under investigation, on an ex-works basis, in accordance with Article 2 11 and 12 of the basic Regulation. As the two cooperating producers were related, a single dumping margin was established based on the weighted average of their individual dumping margins. On this basis, the weighted average dumping margins expressed as a percentage of the CIF Union frontier price, duty unpaid, developed as follows:. Injury elimination level. The Commission then determined the injury elimination level based on a comparison of the weighted average import price of CNBM group established in the AIP with the weighted average non-injurious price of the like product sold by the sampled Union producers on the Union market as established during the OIP. Any difference resulting from this comparison was expressed as a percentage of the weighted average import CIF value. In response to the final disclosure. CNBM group and GoE claimed with reference to the decreasing level of imports from Egypt and the resulting decrease of CNBM market share in the Union that the anti-dumping measures in place have already well protected the Union industry, which has recovered or had opportunity to recover from the alleged material injury. Referring to a parallel anti-circumvention investigation 7 the CNBM group also claimed that selling prices of the Union producers were allegedly increasing, showing that the Union industry had recovered from the material injury suffered. CNBM group further contested the methodology used by the Commission in computing the undercutting and underselling margins, referring to their submissions in the original investigation as well as two judgments of the Court of Justice in this regard 8. Moreover, GoE submitted in response to the final disclosure that in reviewing the injury elimination margin, the Commission used a different level of trade to compare prices and thus failed to act consistently with Article 3 of the ADA on fair comparison. As set out in recital 20 , the present reinvestigation is limited to dumping aspects only. The injury elimination level was recalculated solely in order to fully comply with the relevant rules concerning the level of the duty and cannot affect the outcome of this reinvestigation, as the duties in both the original investigation as well as in this reinvestigation are set at the level of the dumping margin see recital 58 for more details. Regarding to the use of information from a parallel investigation, it is to be noted that CNBM refers to a different investigation and to information that is not available on the case file in the present case. Hence even if such information were to be relevant for the purposes of this case which is not , it could not be used in this case. Hence, anti-dumping measures imposed on imports of the product under investigation by the CNBM group should be amended in accordance with Article 12 3 of the basic Regulation. In accordance with Article 9 4 of the basic Regulation, the amount of the duties should be set at the level of the dumping margin. Therefore, the countervailing duty does not need to be deducted in order to determine the new anti-dumping duty. Consequently, the revised rate of anti-dumping duty applicable, before duty, to the net free-at-Union-frontier price will be as follows:. In reply to the final disclosure, the applicants submitted that, because of the massive increase in undercutting, the Commission should use its full discretion and double the anti-dumping duty. It is observed that the Commission acted in conformity with Article 9 4 , 12 2 and 12 3 of the basic Regulation by recalculating the dumping margin to take account of the lower export prices and setting the revised antidumping duty at the level of the established dumping margin. On 17 May , the Commission disclosed the essential facts and considerations on the basis of which it intended to impose a definitive anti-dumping duty on imports of GFF originating in Egypt. All parties were granted a period within which they could make comments on the disclosure. The comments submitted by interested parties were considered and taken into account where warranted. The definitive anti-dumping duty applicable to the net, free-at-Union-frontier price, before duty, of the product described in paragraph 1 and produced by the companies listed below shall be as follows:. Other companies cooperating in both anti-subsidy and anti-dumping investigation listed in Annex I. Other companies cooperating in anti-dumping investigation but not in anti-subsidy investigation listed in Annex II. African swine fever is an infectious viral disease affecting kept and wild porcine animals and can have a severe impact on the concerned animal population and the profitability of farming causing disturbance to movements of consignments of those animals and products thereof within the Union and exports to third countries. Such amendments should also take account of international standards, such as the Terrestrial Animal Health Code 5 of the World Organisation for Animal Health and justifications for zoning provided by the competent authorities of the Member States concerned. There have been new outbreaks of African swine fever in kept porcine animals in Latvia and Lithuania. Those new outbreaks of African swine fever in kept porcine animals constitute an increased level of risk, which should be reflected in that Annex. Accordingly, those areas of Latvia currently listed as restricted zones II in that Annex, should now be listed as restricted zones III in that Annex instead of as restricted zones II thereof and the current boundaries of restricted zones II also need to be redefined to take account of those recent outbreaks. This new outbreak of African swine fever in kept porcine animals constitutes an increased level of risk, which should be reflected in that Annex. Accordingly, this area of Lithuania currently listed as restricted zone II in that Annex, should now be listed as restricted zone III in that Annex instead of as restricted zone II thereof and the current boundaries of restricted zone II also need to be redefined to take account of this recent outbreak. Following those recent outbreaks of African swine fever in kept porcine animals in Latvia and Lithuania and taking into account the current epidemiological situation as regards African swine fever in the Union, zoning in those Member States has been reassessed and updated. In addition, the risk management measures in place have also been reassessed and updated. As the situation as regards African swine fever is very dynamic in the Union, when demarcating those new restricted zones, account has been taken of the situation in the surrounding areas. The measures provided for in this Regulation are in accordance with the opinion of the Standing Committee on Plants, Animals, Food and Feed,. Article 3 This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union. Done at Brussels, 18 July For the Council The President J. Mustafa Abdullahi , born Passport number: D Mansour Arbabsiar , born 6. National ID number: , expiry date Assadollah Asadi , born Iranian diplomatic passport number: D Abu Zubair, a. Sobiar, a. Abu Zoubair , born 8. Passport number: JX Canada. Passport number: D, valid until 4. Garbaya Ahmed, a. Salwwan Samir , Lebanon, born in Lebanon, citizen of Lebanon. Passport number: M Australia. Ali Salem, a. Bin Khalid Fahd Bin Abdallah, a. Henin Ashraf Refaat Nabith, a. Wadood Khalid Abdul , born Abd-al Reza Shalai, a. Abdorreza Shahlai, a. Abdul-Reza Shahlaee, a. Hajj Yusef, a. Haji Yusif, a. Hajji Yasir, a. Hajji Yusif, a. Yusuf Abu-al-Karkh , born circa in Iran. Article 2 This Regulation shall enter into force on the date following that of its publication in the Official Journal of the European Union. The Union Authorisation is valid from 8 August to 31 July Article 2 This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union. Done at Brussels, 13 July Suffix to the authorisation number Number 1. Product type s Product type s PT02 - Disinfectants and algaecides not intended for direct application to humans or animals Disinfectants 2. Precautionary statements Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Keep away from clothing and other combustible materials. Wear eye protection. In case of fire:Use water to extinguish. Use description Table 1. Medical - healthcare facilities, hospitals and emergency vehicles. Disinfection of non-porous surfaces Application method s Method: - Detailed description: Automated, non-directed aerosolization e. Apply at room temperature. Category ies of users Professional Pack sizes and packaging material Pack sizes L : 0. Use-specific instructions for use Use an automated loading system. Use-specific risk mitigation measures Surfaces in the treatment area must be clean and dry prior to application. Place warning signs on all entrances to the treatment enclosure. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. Instructions for use - 5. Risk mitigation measures The use of eye protection during handling of the product is mandatory. Wear face shield where splashing is possible. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment Particulars of likely direct or indirect adverse effects : — In case of inhalation: Breathing difficulties, cough, pulmonary oedema, nausea, vomiting. Emergency measures to protect environment in case of accident: — Environmental precautions: Should not be released into the environment. Instructions for safe disposal of the product and its packaging Do not allow undiluted product to enter the sewer. Conditions of storage and shelf-life of the product under normal conditions of storage Storage: Hydrogen peroxide should be stored in properly designed bulk storage tanks or in original vented container in upright position away from incompatible products. Shelf-life: 12 months in HDPE packs at ambient temperature. Causes skin irritation. Causes serious eye damage. May cause respiratory irritation. Harmful to aquatic life with long lasting effects. Avoid breathing vapours. Wash hands thoroughly after handling. Do no eat, drink or smoke when using this product. Use only outdoors or in a well-ventilated area. Avoid release to the environment. Wear protective gloves. Wear protective clothing. Wear face protection. Rinse mouth. If skin irritation occurs:Get medical advice. If skin irritation occurs:Get medical attention. Take off contaminated clothing. And wash it before reuse. Store in a well-ventilated place. Keep container tightly closed. Store locked up. Use description Table 2. Medical— healthcare facilities, hospitals, emergency vehicles. Disinfection of non-porous surfaces. Application method s Method: - Detailed description: Automated, non-directed aerosolization e. Use description Table 3. Volume of disinfected enclosure should be 15 - m3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment Particulars of likely direct or indirect adverse effects: — In case of inhalation: Breathing difficulties, cough, pulmonary oedema, nausea, vomiting. Causes severe skin burns and eye damage. Do not breathe vapours. Wash contaminated clothing before reuse. Use description Table 4. Use description Table 5. Use description Table 6. Use 1 — Disinfection of polyethylene terephthalate food packages by vaporised hydrogen peroxide VHP Product type PT04 - Food and feed area Disinfectants Where relevant, an exact description of the authorised use Not relevant Target organism s including development stage Common name: Bacterial Spores Development stage: Field s of use Indoor Industrial use - food and feed area. Disinfection of food package material. Approved grades of HDPE. After sterilisation, blow-dry the packaging with hot sterile air. Use-specific risk mitigation measures During operation, ensure adequate ventilation along the machines LEV and in the industrial halls technical ventilation. Use description Table 7. Use 1 — Disinfection of food packaging material aseptic packaging by immersion or aerosolised or vaporised hydrogen peroxide VHP Product type PT04 - Food and feed area Disinfectants Where relevant, an exact description of the authorised use Not relevant Target organism s including development stage Common name: Bacterial Spores Development stage: Field s of use Indoor Industrial use - food and feed area. Application method s Method: - Detailed description: Automated immersion of packaging material into bath of heated product in aseptic filling machine. Glove material to be specified by the authorisation holder within the product information Aerosolised or vaporised application should be use only in closed aseptic packaging machines with no emission to water and negligible emission to air. Use description Table 8. Use 2 — Disinfection of closed areas in aseptic packaging machines by aerosolised and vaporised hydrogen peroxide VHP Product type PT04 - Food and feed area Disinfectants Where relevant, an exact description of the authorised use Not relevant Target organism s including development stage Common name: Bacterial Spores Development stage: Field s of use Indoor Industrial use - food and feed area. Application method s Method: - Detailed description: Automated vaporisation or aerosolization in closed areas in aseptic filling machines. Automated disinfection of closed areas in aseptic filling machines. Use description Table 9. Frequency: once per week. Use following installation, maintenance or cleaning. Use-specific risk mitigation measures CIP and automated spraying: The processes must be fully automated and enclosed with no exposure in the case of tanks or piping systems. Use description Table Use 2 — Surface disinfection in food and feed processing by liquid application Product type PT04 - Food and feed area Disinfectants Where relevant, an exact description of the authorised use Disinfection of equipment, containers, consumption utensils, surfaces or pipework associated with the production, transport, storage or consumption of food or feed for humans and animals. Use an automated loading system for CIP and automated spraying. Use-specific risk mitigation measures CIP: The processes must be fully automated and enclosed with no exposure in the case of tanks or piping systems. Automated spraying: In the case of automated spraying of surfaces such as conveyors or other fixed installations workers must leave the room before processing. Immersion: The use of eye protection during handling of the product is mandatory. A protective coverall at least type 6, EN shall be worn in loading. Ensure adequate ventilation during the application. Product type s Product type s PT02 - Disinfectants and algaecides not intended for direct application to humans or animals Disinfectants PT03 - Veterinary hygiene Disinfectants 2. Avoid breathing spray. Use-specific instructions for use Use an automated loading system for CIP and automated spraying. Application method s Method: - Detailed description: Spraying with automated or manual equipment Application rate s and frequency Application Rate: Use concentration 9. Frequency depends on life-cycle of animals - as required by user. Use-specific instructions for use Dilute the product to reach the needed hydrogen peroxide concentration stated below. Use-specific risk mitigation measures Automated spraying systems: During the operation worker must leave the area and access must be denied by appropriate barriers or locked doors. For manual spraying: The use of eye protection during handling of the product is mandatory. A protective coverall at least type 6, EN shall be worn. Do not breathe spray. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use 4. Use 2 — Disinfection of surfaces associated with animal housing by spraying Product type PT03 - Veterinary hygiene Disinfectants Where relevant, an exact description of the authorised use Not relevant. Interested parties 8 In the Notice of Reopening, the Commission invited interested parties to contact it in order to participate in the reinvestigation. Sampling of exporting producers in the country concerned to be reinvestigated 10 In order to enable the Commission to decide whether sampling in accordance with Article 17 of the basic Regulation would be necessary in respect of the producers in the country concerned, those parties were requested to make themselves known and to provide the Commission with the information requested in the Notice of Reopening. Sampling of unrelated importers 11 In order to decide whether sampling was necessary and, if so, to select a sample, the Commission asked unrelated importers to provide the information specified in the Notice of Reopening. Replies to the questionnaires and verifications 12 The Commission sent a questionnaire to Jushi Egypt and Hengshi Egypt, to which they replied. Decrease of export prices 26 In this case, both exporting producers exported to the Union either directly to independent customers or through related companies and the Commission analysis focused accordingly on the evolution of export prices in the AIP as compared to the OIP. Dumping 3. Introduction 31 After having established possible absorption for CNBM group, the dumping margin was recalculated, according to Article 2 of the basic Regulation. Comparison 47 The Commission compared the normal value and the export price of the two cooperating exporting producers on an ex-works basis. Dumping margin 50 In order to establish the dumping margin for the two cooperating exporting producers, the Commission compared the weighted average normal value of each type of the like product with the weighted average export price of the corresponding type of the product under investigation, on an ex-works basis, in accordance with Article 2 11 and 12 of the basic Regulation. CNBM group 20 33,1 13,1 3. Injury elimination level 53 The Commission then determined the injury elimination level based on a comparison of the weighted average import price of CNBM group established in the AIP with the weighted average non-injurious price of the like product sold by the sampled Union producers on the Union market as established during the OIP. The definitive anti-dumping duty applicable to the net, free-at-Union-frontier price, before duty, of the product described in paragraph 1 and produced by the companies listed below shall be as follows: Country concerned Company Definitive anti-dumping duty TARIC additional code PRC Jushi Group Co. Ltd; Taishan Fiberglass Inc. Ltd; Chongqing Tenways Material Corp. Article 2 This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union. Official Journal of the European Union. Product type s. Name and address of the authorisation holder. Authorisation number. Date of the authorisation. Expiry date of the authorisation. Name of manufacturer. Solvay Interox Limited. Address of manufacturer. Location of manufacturing sites. Solvay Chemicals Finland Oy. Solvay Chemicals GmbH Germany. Solvay Chemie BV Netherlands. Solvay Chimie SA Belgium. Active substance. Hydrogen peroxide. Rue de Ransbeek , Brussels Belgium. Common name. IUPAC name. CAS number. EC number. Active Substance. Formulation s. Meta SPC 1. AL - Any other liquid. Hazard statements. May intensify fire; oxidiser Causes serious eye damage. Precautionary statements. Product type. Where relevant, an exact description of the authorised use. Not relevant. Target organism s including development stage. Field s of use. Indoor Indoor, closed spaces. Application method s. Method: - Detailed description: Automated, non-directed aerosolization e. Application rate s and frequency. Category ies of users. Pack sizes and packaging material. Pack sizes L : 0. In case of skin contact: Redness, swelling of tissue, skin irritation. Environmental precautions: Should not be released into the environment. Methods and materials for containment and cleaning up: Dilute with plenty of water. Trade name s. Market area: EU. EU Meta SPC 2. May intensify fire; oxidiser Harmful if swallowed. Indoor Indoor, closed spaces Industrial — pharmaceutical industry or cosmetics industry, for example clean rooms. Indoor Indoor. Meta SPC 3. Interox SG Meta SPC 4. PT04 - Food and feed area Disinfectants. Common name: Bacterial Spores Development stage:. Indoor Industrial use - food and feed area. Method: - Detailed description: Automated vaporization in aseptic filling machines. Meta SPC 5. Method: - Detailed description: Automated immersion of packaging material into bath of heated product in aseptic filling machine. Method: - Detailed description: Automated vaporisation or aerosolization in closed areas in aseptic filling machines. Meta SPC 6. SL - Soluble concentrate. Indoor Industrial use - drinking water systems for human and animals drinking water. Immersion: make solution and dip items. Meta SPC 7. Meta SPC 8. PT02 - Disinfectants and algaecides not intended for direct application to humans or animals Disinfectants PT03 - Veterinary hygiene Disinfectants. Indoor Industrial or institutional use. PT03 - Veterinary hygiene Disinfectants. Indoor Disinfection of non-porous materials and surfaces associated with the housing of animals. Method: - Detailed description: Spraying with automated or manual equipment. Application Rate: Use concentration 9. Bactericidal and yeasticidal - 9. Meta SPC 9. Jushi France S. S, France. On this basis, the weighted average dumping margins expressed as a percentage of the CIF Union frontier price, duty unpaid, developed as follows: Company name. Increase of the dumping margin p. CNBM group. Consequently, the revised rate of anti-dumping duty applicable, before duty, to the net free-at-Union-frontier price will be as follows: Company. Definitive dumping margin. All other companies. Country concerned. Definitive anti-dumping duty. TARIC additional code. Jushi Group Co. See Annex I. See Annex II. Gemeinde Byhleguhre-Byhlen,. Gemeinde Neu Zauche,. Gemeinde Spreewaldheide,. Gemeinde Straupitz,. Gemeinde Strausberg mit den Gemarkungen Hohenstein und Ruhlsdorf,. Gemeine Garzau-Garzin,. Gemeinde Waldsieversdorf,. Gemeinde Rehfelde mit der Gemarkung Werder,. Gemeinde Oberbarnim,. Gemeinde Bad Freienwalde mit der Gemarkung Sonnenburg,. Gemeinde Britz,. Gemeinde Breydin,. Gemeinde Melchow,. Gemeinde Zichow,. Gemeinde Tantow,. Gemeinde Mescherin. Gemeinde Mittenwalde,. Gemeinde Flieth-Steglitz,. Gemeinde Carmzow-Wallmow. Gemeinde Schenkenberg mit der Gemarkung Kleptow,. Gemeinde Rauen,. Gemeinde Reichenwalde,. Gemeinde Tauche mit der Gemarkung Werder,. Gemeinde Drachhausen,. Gemeinde Schmogrow-Fehrow,. Gemeinde Drehnow,. Gemeinde Teichland mit den Gemarkungen Maust und Neuendorf,. Gemeinde Dissen-Striesow,. Gemeinde Briesen,. Gemeinde Drebkau mit den Gemarkungen Jehserig und Kausche,. Gemeinde Welzow mit der Gemarkung Welzow,. Landkreis Oberspreewald-Lausitz: Gemeinde Neupetershain,. Gemeinde Lauchhammer,. Gemeinde Schwarzheide,. Gemeinde Schipkau,. Gemeinde Tettau,. Gemeinde Hirschfeld,. Gemeinde Schraden,. Gemeinde Merzdorf,. Gemeinde Plessa mit der Gemarkung Plessa,. Gemeinde Triglitz,. Gemeinde Gerdshagen mit der Gemarkung Gerdshagen,. Gemeinde Meyenburg,. Gemeinde Pritzwalk mit der Gemarkung Steffenshagen,. Gemeinde Cunewalde,. Gemeinde Hochkirch, sofern nicht bereits der Sperrzone II,. Gemeinde Obergurig,. Gemeinde Sohland a. Gemeinde Stadt Schirgiswalde-Kirschau,. Gemeinde Stadt Wilthen,. Gemeinde Steinigtwolmsdorf,. Gemeinde Hirschstein,. Gemeinde Stadt Lommatzsch,. Gemeinde Stadt Riesa,. Gemeinde Stadt Strehla,. Gemeinde Stauchitz,. Gemeinde Zeithain,. Landkreis Mittelsachsen: Gemeinde Reinsberg,. Gemeinde Kreischa,. Gemeinde Lohmen,. Gemeinde Stadt Dohna,. Gemeinde Stadt Freital,. Gemeinde Stadt Heidenau,. Gemeinde Stadt Hohnstein,. Gemeinde Stadt Neustadt i. Gemeinde Stadt Pirna,. Gemeinde Stadt Stolpen,. Gemeinde Blievenstorf mit dem Ortsteil: Blievenstorf,. Lazio Region: in the province of Rome,. Gemeinde Mixdorf. Gemeinde Schlaubetal,. Gemeinde Neuzelle,. Gemeinde Lawitz,. Gemeinde Vogelsang,. Gemeinde Ziltendorf,. Gemeinde Wiesenau,. Gemeinde Friedland,. Gemeinde Siehdichum,. Gemeinde Jacobsdorf. Gemeinde Brieskow-Finkenheerd,. Gemeinde Ragow-Merz,. Gemeinde Beeskow,. Gemeinde Rietz-Neuendorf,. Gemeinde Langewahl,. Gemeinde Diensdorf-Radlow,. Landkreis Dahme-Spreewald: Gemeinde Jamlitz,. Gemeinde Lieberose,. Gemeinde Guben,. Gemeinde Tauer,. Gemeinde Peitz,. Gemeinde Turnow-Preilack mit der Gemarkung Preilack,. Gemeinde Forst,. Gemeinde Tschernitz,. Gemeinde Felixsee,. Gemeinde Wiesengrund,. Gemeinde Neuhardenberg. Gemeinde Golzow,. Gemeinde Alt Tucheband,. Gemeinde Reitwein,. Gemeinde Podelzig,. Gemeinde Gusow-Platkow,. Gemeinde Seelow,. Gemeinde Vierlinden,. Gemeinde Lindendorf,. Gemeinde Lietzen,. Gemeinde Falkenhagen Mark ,. Gemeinde Zeschdorf,. Gemeinde Treplin,. Gemeinde Lebus,. Gemeinde Oderaue,. Gemeinde Neulewin,. Gemeinde Neutrebbin,. Gemeinde Letschin,. Gemeinde Zechin,. Landkreis Barnim: Gemeinde Lunow-Stolzenhagen,. Gemeinde Parsteinsee,. Gemeinde Oderberg,. Gemeinde Liepe,. Gemeinde Niederfinow,.

Buying weed online in Ruda Slaska