Automatic filling machine

While viscosity level will always play a part in the filling principle used for any given packaging project, it is not as important when it comes to choosing the automatic filling machine. Overflow fillers, gravity fillers, automatic filling machine, and piston fillers are all available in different levels of automation. The starting automation level for a packager will most often be based on the production requirements and the available space to perform the packaging.

First and foremost, beginning production levels will play a large part in choosing the correct level of automation for an automatic filling machine. If a company is only looking to supply a local or regional area, tabletop or unframed packaging systems may be the ideal solution. Tabletop filling machines allow operators to create a filling station on just about any tabletop surface. These machines will usually include a slide track and the operator will move bottles under the fill nozzles - which can range anywhere from one to four nozzles. Once under the nozzles, a footswitch, finger switch or other similar forms of activation lets the operator start the filling cycle. Once bottles are filled, they are manually moved from under the fill heads and replaced by empty bottles to start the process again. Tabletop machines are simple to use and are a cost-effective tool for short-run products or low production needs.

Unframed packaging systems can be manufactured as tabletop systems or on a portable frame for easy mobility. These filling systems incorporate other packaging functions to create a packaging system with a small footprint, saving both space and time while allowing for consistency across several packaging platforms. For instance, an overflow filler may be built onto a portable frame for a product such as bottled water. However, with the unframed system, a manual wet rinsed, handheld chuck capper and semi-automatic labeling machine will be added to this same frame. Rather than have a station for each and every one of these functions, the unframed system incorporates each stage on the same machine frame. A single operator might perform the rinse, fill, cap and label of the bottles. Or two users might split the packaging duties, one rinsing and filling while the second caps and labels. The packaging machinery allows for greater consistency and in most cases more efficient packaging than when done by hand. Like the tabletop filling machines, unframed systems save space and are an ideal solution for short run products or for companies with lower production demands.

As production rates increase, most companies will start looking toward semi-automatic and automatic filling machines on portable frames. The semi-automatic machines will still require an operator to either place bottles on a conveyor or slide the containers under the fill heads manually. Semi-automatic liquid fillers may use simple indexing, but in most cases will still require some type of activation from the operator of the packaging machine. Semi- automatic filling machine can be used with other packaging machines on a line or can act as standalone filling machines.

Automatic filling machine will be manufactured using the same frame as the semi-automatic machines, but will include a PLC with a touchscreen operator interface. This feature allows automatic filling machine to be upgraded in the future should production rates grow. These machines can roll up to almost any existing power conveyor system to begin running production. Of course, most automatic liquid filling machines will be a part of an inline packaging system, which will include a conveyor system and other machinery such as container cleaning equipment, capping machines, labelers and any other machinery necessary to automatically prepare a product and package for the consumer. This means, as a general rule, as production rates increase, so does the space required to perform the packaging.