A How-To Guide For Replacement Handles For Upvc Windows From Start To Finish
Replacement Handles For UPVC Windows
uPVC handles can become loose or even fall off. Fortunately replacing them is a simple job with the appropriate tools.
Check for the screws or pins holding it in place to determine the type of handle. Once you have identified them, remove them and then gently drag the handle off the spindle.
Espag Handle
Espag handles are most commonly found on double-glazed uPVC Windows. They are flat and cylindrical in shape. They are typically made of uPVC but can be made of different materials depending on the style and design of your window. Handles are available in many designs and colors to complement your home's decor.
The espag is also called a cockspur or spade. It is a great option to replace a damaged handle on older uPVC window. They're not as secure as modern handle styles however, they do provide an easy locking system. The handle is made of two studs, called mushrooms, that are able to move upwards and downwards as the handle rotates. These catch into an iron plate that is attached to the frame, which is known as the keep. The handle can also be found in a cranked version that gives you more room for your hands and a sleeker appearance or an inline version that some people prefer.
These types of uPVC handles are usually found on double-glazed windows and older timber windows. They're often made from aluminium or uPVC, but they can be made from other materials too. Espag window handles are locked by a key, or by using wedge blocks that are placed between the handle and frame. They are also easy to maintain and you can even purchase replacement parts for them in the event that they break.
To choose the best espag handle for your window, you should first verify the dimensions of the spindle on the back of the handle. The spindle should have a maximum diameter of 7mm. Also, you must measure the height of the step at which the handle is positioned on the frame of the window. If you select the correct handle size the window will shut with a tight seal.
walton-on-thames door handle repair made of espag are a fantastic choice for historic windows. They also work well with modern windows and are available in left-hand and right-hand versions. They have a stylish reeded design at the top and a thin backplate that is able to fit into the frame of the window. The handles can be locked and come with a good height.
Venetian Handle
When you are replacing your upvc window handles There are a variety of types of handles to pick from. There are many different styles of handles that you can pick from that include Cockspur handles (also called Espag handles) blade or spade handles and tilt and turn handles. The type of handle that you select will depend on the type of window you have as well as on your personal preferences. Be aware of the size of handles and the spindle. It is important that the handle is able to fit into the screw holes and has the correct spindle.
A cockspur handle can be described as one of the most sought-after kinds of replacement handles available for windows made of upvc. They come in a wide range of colors and finishes. There are locking and non-locking versions. The main difference between the two is that a cockspur handle can be locked using the use of a key. The keyed handle is used in high-security homes, and is more secure than a traditional handle.
Venetian handles are usually fixed by two bolts, much like Espagnolette handles. They are a little recessed from the frame, meaning that they won't pierce through blinds, as other window handle types can. They're also a great choice for high-rise flats because they can be easily cleaned from the inside. These window handles are an excellent choice if you are looking for a fashionable, functional replacement for your upvc windows.
There is a handle for any type of window. When selecting a replacement handle, you must consider the size and shape of the screw holes are, the height of the step, the spindle length, and the handling. The handle should be able to support the weight of the window when it is closed.
A tilt and turn handle is a great option for upvc windows that open from the side. It serves two purposes and lets you tilt and turn the window, which is helpful for ventilation as well as security and cleaning. It is also easy to use, even using only one hand. The handle can be locked in a wide-open position or be tilted to enjoy the fresh air without worrying about whether burglars could break in.
Pear Drop Handle
If you find that your uPVC window handle or lock is damaged, you'll need to replace it with a similar model. This is a relatively simple process and is easy to do yourself. First, close your window and then remove the screw located at the base of the handle. This will reveal two more screws. Once these screws are removed, the handle should come away. The multipoint lock can be removed by removing the two screws. Once the new handle has been constructed, you can screw it in place. If your handle has an encapsulated screw, put it back on, too.
Espagnolette handles are most commonly used on uPVC window frames. They are distinguished by their flat-strip shape, they work together with multipoint locks that are secure and secured around the frame to offer industry-leading levels of home security. They can be fitted to open from either the left or right, and come in a variety of colors.
Cockspur handles are a more traditional design of handle. They are popular with those who appreciate heritage improvements, as well as for those who like an older-fashioned look. These handles come with shafts that run through the handle and into the gearbox. This turns into series shootbolt rods to secure the window.
Pear drop handles are a more contemporary alternative to cockspur handles and offer a similar level of security. These handles are an excellent choice for those who want to modernize their windows, but still retain the traditional style of their home.
The Cornish Heritage Tear Drop Espag Handle is a tribute to 19th Century ironmongery and is ideally suitable for casement windows with a heritage style, ensuring that your home's exterior is finished off with a stylish appearance. This handle is compatible with a tear drop operating stay and dummy stays to make an entirely matching window.
Selecting the right handle replacement for your uPVC windows can be a daunting task, but our handy guide and useful advice will ensure that you get the best results. If you're replacing your current uPVC handle and lock, or upgrading your entire window set, you can be sure that Bridgewater Glass will help you discover the best solution to suit your home.
Handle that is tilted and turns
Tilt and turn handles are used on double-glazed windows that open to the outside and can be tilted back or down to allow for ventilation. The handle is turned and a lock mechanism is activated when the window is tipped into either position. These windows are extremely popular in Europe. They permit better ventilation, and they are safer. When replacing a uPVC tilt and turn handle, the new handle should be compatible with the window type and locking mechanism to ensure security and functionality.
Tilt-and-turn windows are typically constructed out of uPVC or aluminum, with a timber frame being a possible alternative for those looking to add traditional style and feel to their home. UPVC frames provide the most value for money and are long-lasting as well as energy efficient and require minimal maintenance. Aluminum frames are more expensive but provide superior durability and resistance to corrosion.
The uPVC tilt and turn handle works similarly similar to an espagnolette handle however it is heavier and larger due to the fact that they are fitted to larger windows, typically up to door size. They are also more durable because they have to be able to withstand more forces when the window opens to the inside and tilted.
The key to a replacement tilt-and-turn handle is that it can be locked in one of four positions. This will prevent the window from opening to the room. This can be done using a key, which is ideal for children who are around as it stops them from opening the window too much and potentially being injured.
As a result, the majority of tilt and turn window handles that are on the market will have this feature built in as standard with the exception of cheap Chinese-made products. Sealco Scotland stock a wide range of high quality tilt and turn handles from manufacturers such as Hoppe, Trojan, and Sensei.
When purchasing a tilt and turn window handle, it is crucial to measure the existing handle to determine the best style to fit. You will require the distance between the screw holes which is typically 43mm centre-to-centre. Some handles could have the screws obscured by cover caps or a spring loaded backplate, which means you'll need to remove these before you can expose the fixing positions.