7 Useful Tips For Making The Most Of Your Boarding Up Windows And Doors

7 Useful Tips For Making The Most Of Your Boarding Up Windows And Doors


Boarding Up Windows and Doors Before a Storm Hits

Insuring your windows and doorways before a storm strikes can provide the protection you need against damage. You'll need a few items to do this.

Measure the height and width of the window including the frame (not the trim or masonry that surrounds the window). Keep these measurements in mind so you won't forget.

Preparation

It is always recommended to secure doors and windows prior to an event like a storm or natural disaster hits. This will limit property damage and reduce the chance of a fatality. Boarding up windows requires an extensive amount of preparation, like buying and measuring plywood boards as well as determining the exact dimensions of each window to cover. It takes time to cut and put in the boards properly. The process can be streamlined by preparing the boards when you learn of the possibility of a storm affecting your area. By doing so, you can avoid a stressful last-minute rush and make the process simpler for you and your employees.

Begin by listening to forecasters for weather and follow the guidelines laid out by your local government. If you start earlier in the process, you'll have more time to collect the materials and keep them in storage without feeling rushed by the approaching storm. It is possible that you will require a large amount of plywood to cover your windows, depending on the severity and imminence of the storm. To ensure you get the correct size, make use of a tape measure to determine the width and height of each window opening. Be sure to include the trim or framing around each window, as well as any ledges that are extended, if necessary.

Then, determine the dimensions of the plywood sheets you need by dividing your window's total width and height by 2. For example, if width of your window is 16 inches, the thickness of each sheet should be 8 inches. If your exterior is made of wood, drill pilot holes into the plywood sheet to align with the window frame below. This will prevent the chance of splitting when you insert the screws.

If the window opening is bigger than what a sheet of plywood can accommodate, cut two separate sheets that are each half the size of the desired window and set them side-byside on the wall. Cut a piece of 2 by 4 in (5.1 10.2 cm) 10.2 cm) of lumber to the length the connecting edge between the sheets of plywood and place it on top of the seam. Then screw 2.25 in (5.7cm) screws into the plywood sheet and into the bracing to join the two.

Materials

To ensure security and safety for security and safety, boarding up windows and doors should be done using only sturdy materials that will not crack under pressure or splinter in high winds. Plywood is a popular material for boarding up windows. boarding up windows service is simple to use, inexpensive, and easily available. Choose plywood that is exterior grade (CDX), as it will be stronger and have less knots and warps. Hurricane or storm shutters are more durable options. They can be installed over existing windows and offer better protection against shattered glasses and inclement weather.

Once you've determined the location of the window openings then measure the height and width of each one to determine how much plywood you will need. Then you can use a power drill to make pilot holes in the plywood sheets at 2-inch intervals around each window. Before attaching the plywood, identify and mark the stud locations on the wall to ensure that the boards will be fastened securely. If your home is constructed with wood siding, look for nailheads that could indicate the location of studs. In other cases, you can search for stud locations using your drill. Drive the screws into the framing, not into the sheathing or trim. A plywood panel attached to these materials alone could be a danger to safety in the event of high winds.

If the size of your window is too big for a single sheet of plywood, cut two separate pieces that are each half the size you require. join them using 2 by 4 inch lumber. Label each plywood panel so that you know which window it will be covering.

To affix the plywood panels to the wall, make use of corrosion-resistant screws that are sufficient in length to penetrate both the sheathing and studs. To secure the plywood panels to the wall, use screws made of corrosion-resistant that are long enough to penetrate both the sheathing as well as the studs.

In addition to securing your windows, it is also advisable to install a "No Trespassing" sign on the property and think about installing polycarbonate security glazing like DefenseLite over your primary windows. These transparent shields are secured to the existing glass and safeguard your doors and windows. They are virtually impervious to breakage and deter criminals from breaking into the house.

Installation

If you live in a region prone to hurricanes, or plan to move to one, the best option is to secure your doors and windows before the possibility of a storm is afoot. It's a project that can be done quickly and efficiently, but only if you take the time to measure, cut and label your plywood panels prior to when the storm hits.

You'll also require a few other tools, like drills (or an hammer and nails for those who don't own an electric drill), a saw, tape, a level, gloves and a pair of safety glasses. It's a good idea apply sealant to the plywood and make it waterproof.

Begin by measuring each window opening's width and height. Then cut the plywood sheets to fit into the frames. It is best to do this on site, since it allows you to control the exact dimensions of the plywood.

Use a circular saw or track saw to cut the boards to size be aware that you'll have to sand them off once they're installed. After your boards are in place put the 3 inch stainless steel hanger screws into the posts that frame each window. Use washers on each bolt, and wings nuts to anchor them. Make sure that each screw gets through the studs at a minimum of two inches to ensure the board is strong enough to withstand high winds.

If you're building using concrete block, you can instead join the plywood to the building by using galvanized pan-head screws that are driven through the edges that are overlapping of each piece into bricks or cinder blocks. It is also necessary to drill pilot holes in the masonry, and then screw corrosion-resistant screws into the holes. It's a job that can take anywhere from three to four hours for each window, so it's crucial to begin the process immediately after you hear that a hurricane watch has been issued. This will give you ample time to complete the task before the storm hits.

Maintenance

If you're a homeowner or business owner, it is essential to have the necessary supplies to put up a board around windows and doors in advance of a severe storm. This will save you from costly repairs and shield your property from further damage caused by rain, wind debris, flying debris, and other elements that can impact the windows.

The right materials can make the boarding up process easier and faster to complete. The key is to precisely determine the dimensions of the windows you have to cover. This will ensure that the plywood or OSB is snugly fitted and won't be able to be removed easily. If you're using plywood, ensure that you are using exterior-grade sheets, and consider adding an extra layer of protection.

After you have the OSB or plywood measured, mark the areas where screws will be inserted into the board. Use a drill to predrill holes at 12-inch intervals into the plywood. This will allow you to safely fasten the boards with hanger bolts during a disaster or emergency situation. Once the storm has passed and the local authorities have given you the all-clear, remove the bolts, but save them in case of emergency.

Then, you can install the plywood panels above the windows. This is a job for two people So, be prepared before you start. If you're using plywood be sure to sand the edges of the piece to smooth them so that they don't scratch paint or cut. Then use corrosion-resistant screws to connect the plywood using the pilot holes. If your home is covered with vinyl shingles it is recommended to nail the plywood to the shingles, not the wood framing beneath.

Apart from keeping out rain and other weather elements, a boarded-up window is also a good method to stop burglaries. Burglars are more likely take aim at a structure that has a damaged or unlocked window. Also, they are more likely to break in the store with a boarded up window than one that has no. This is something that business owners in retail should take very seriously.

Report Page